Novel thermoplastic elastomers based on acrylonitrile-butadiene-styrene terpolymer (ABS) from waste computer equipment and nitrile rubber

Rubber Chemistry and Technology

Volumn 76, Issue 5, 2003, Pages 1145-1163

  Anandhan, S ^a   De, P P ^a   De, S K ^a   Bhowmick, Anil K ^a   Bandyopadhyay, S ^b  

^a INDIAN INSTITUTE OF TECHNOLOGY   (India)

^b UNIVERSITY OF NEW SOUTH WALES   (Australia)

Author keywords

[No Author keywords available]

Indexed keywords

ABS RESINS; ATOMIC FORCE MICROSCOPY; DIFFERENTIAL SCANNING CALORIMETRY; DISPERSIONS; ELASTIC MODULI; HARDNESS; MORPHOLOGY; NITRILE RESINS; POLYMER BLENDS; RECYCLING; RUBBER; SWELLING; TENSILE STRENGTH; THERMOGRAVIMETRIC ANALYSIS; TRANSMISSION ELECTRON MICROSCOPY; VULCANIZATION;

ACRYLONITRILE-BUTADIENE-STYRENE TERPOLYMERS (ABS); NITRILE RUBBERS (NBR); PLASTIC SCRAPS; SCRAP COMPUTER PLASTICS (SCP);

THERMOPLASTIC ELASTOMERS;

EID: 2642546215     PISSN: 00359475     EISSN: None     Source Type: Journal    
DOI: 10.5254/1.3547793     Document Type: Article

References (36)

1. "Engineering Polymer Sourcebook," R. B. Seymour, Ed., Mc-Graw Hill Publishing Company, New York, 1990, pp.119-121.
2. H. S. Matthews, F. C. McMichael, C. T. Hendrickson, and D. J. Hart, Green Design Initiative Technical Report # 97-10, Carnegie Mellon University, July 7, 1997.
3. "Polymer Recycling," J. Scheirs, Ed., John Wiley and Sons, New York, 1998, pp. 303-324.
4. X. Liu and H. Bertilsson, J. Appl. Polym. Sci. 74, 510 (1999).
5. S. Paul and D. D. Kale, J. Appl Polym. Sci. 80, 2593 (2001).
6. L. B. Brennan, D. H. Isaac, and J. C. Arnold, J. Appl. Polym. Sci. 86, 572 (2002).
7. T. Luo and A. I. Isayev, J. Elast Plast. 30, 133 (1998).
8. M. Tipanna and D. D. Kale, RUBBER CHEM. TECHNOL. 70, 815 (1997).
9. P. Rajalingam, J. Sharpe, and W. E. Baker, RUBBER CHEM. TECHNOL. 66, 664 (1993).
10. C. Jacob, P. P. De, A. K. Bhowmick, and S. K. De, J. Appl. Polym. Sci. 82, 3304 (2001).
11. P. Nevatia, T. S. Banerjee, B. Dutta, A. Jha, A. K. Naskar, and A. K. Bhowmick, J. Appl. Polym Sci. 83, 2035 (2002).
12. A. Pawalak, M. Pluta, J. Morawiec, A. Galeski, and M. Pracella, Eur. Polym. J. 36, 1875 (2000).
13. N. Papke and J. Karger-Kocsis, Polymer 42, 1109 (2001).
14. P. Ghosh, A. K. Sen, and P. Ray, Polymer 33, 744 (1992).
15. S. H. Botros, M. E. Kenawy, A. F. Younan, and I. M. El Kashef, Kautsch. Gummi. Kunstst. 53, 722 (2000).
16. K. E. George, R. Joseph, and D. J. Francis, J. Appl Polym. Sci. 32, 2867 (1986).
17. S. J. Ahn, K. H. Lee, B. K. Kim, and H. M. Jeong, J. Appl. Polym. Sci. 73, 935 (1999).
18. A. Y. Coran, and R. Patel, paper presented at a meeting of the Rubber Division, American Chemical Society, Minneapolis, June 2-5, 1981.
19. M. Mehrabzadeh and N. Delfan, J. Appl. Polym. Sci. 77, 2057 (2000).
20. N. R. Choudhury and A. K. Bhowmick, J Elast. Plast. 28, 161 (1996).
21. N. R. Choudhury and A. K. Bhowmick, J Mat. Sci. 25, 161 (1990).
22. A. Y. Coran, R. P. Patel, and D. Williams, RUBBER CHEM. TECHNOL. 55, 116, 536 (1982).
23. S. Anandhan, P.P. De, A. K. Bhowmick, S. Bradyopadhyay, S. K. De, J. Appl. Polym. Sci. 88, 1976 (2003).
24. H. G. Fritz and R. Anderlik, Kautsch. Gummi. Kunstst. 46, 374 (1993).
25. A. Y. Coran and R. P. Patel, in "Reactive Modifiers for Polymers," S. Al Malaika, Ed., Chapman and Hall, London, 1997, pp. 349-391.
26. A. Y. Coran, in "Thermoplastic Elastomers -A Comprehensive Review," N. R. Legge, G. Holden, H. E. Schroeder, Eds., Hanser Publishers, Munich, 1987, Ch. 7.
27. A. Y. Coran, R. Patel, and D. Williams, RUBBER CHEM. TECHNOL. 55, 1063 (1982).
28. M. R. Kamal, Z. Tang, and T. Huang, Int. Polym. Process. 16, 376 (2001).
29. S. Anandhan, P. P. De, A. K. Bhowmick, and S. K. De, J. Appl. Polym. Sci. (in press).
30. J. Fang, S. Haplepete, W. Chen, and C. R. Helms, J. Polym. Phys. 82, 5891 (1997).
31. C. J. Buchko, K. M. Kozloff, and D. C. Martin. BioMaterials 22, 1289 (2001).
32. A. K. Naskar, A. K. Bhowmick, and S. K. De, Polym. Eng. Sci., 41, 1087 (2001).
33. H. Huang, J. Yang, X. Liu, and Y. Zang, Eur. Polym. J. 38, 857 (2002).
34. Thermoplastic Elastomers from Rubber-Plastic Blends," S. K. De and A. K. Bhowmick, Eds., Ellis Horwood Ltd., London, 1990, ch. 1.
35. A. Ibrahim and M. Dahlan, Prog. Polym. Sci. 23, 665 (2002).
36. D. A. Seil and F. R. Wolf, in "Rubber Technology," M. Morton, Ed., VanNostrand Reinhold Co., New York, 1992.