A finite element comparison between the mechanical behaviour of rigid and resilient oral implants with respect to immediate loading

Computer Methods in Biomechanics and Biomedical Engineering

Volumn 8, Issue 1, 2005, Pages 45-57

  Del Palomar, Amaya Pérez ^a   Arruga, Alberto ^a   Cegoñino, José ^a   Doblaré, Manuel ^a  

^a UNIVERSITY OF ZARAGOZA   (Spain)

Author keywords

Immediate Loading; Implantology; Osseointegration process; Resilient Implant

Indexed keywords

BONE SURFACE; CONTACT CONDITIONS; DENTAL SYSTEM; FINITE ELEMENT; HYPER ELASTIC; IMMEDIATE LOADING; IMPLANTOLOGY; LOADING STATE; MECHANICAL BEHAVIOR; MECHANICAL BEHAVIOUR; MICRO MOTION; MOBILE PARTS; ORAL IMPLANTS; OSSEOINTEGRATION; PERIODONTAL LIGAMENT; RELATIVE DISPLACEMENT;

DENTAL PROSTHESES; FINITE ELEMENT METHOD; INTERFACE STATES; LOADS (FORCES); MECHANICAL ENGINEERING; SILICONES;

LOADING;

ARTICLE; BIOLOGICAL MODEL; COMPARATIVE STUDY; COMPUTER SIMULATION; DENTAL CARE; ELASTICITY; EQUIPMENT; EVALUATION; FINITE ELEMENT ANALYSIS; HUMAN; MANDIBLE; MECHANICAL STRESS; METHODOLOGY; PATHOPHYSIOLOGY; TOOTH IMPLANTATION; TOOTH PROSTHESIS; WEIGHT BEARING;

COMPUTER SIMULATION; DENTAL IMPLANTS; DENTAL PROSTHESIS DESIGN; DENTAL STRESS ANALYSIS; ELASTICITY; EQUIPMENT FAILURE ANALYSIS; FINITE ELEMENT ANALYSIS; HUMANS; MANDIBLE; MODELS, BIOLOGICAL; STRESS, MECHANICAL; WEIGHT-BEARING;

EID: 25644442468     PISSN: 10255842     EISSN: 14768259     Source Type: Journal    
DOI: 10.1080/10255840500141593     Document Type: Article

References (51)

1. R. Adell, U. Lekholm and P. I. Branemark, "A 15 year study of osseointegrated implants in the treatment of the edentulous jaw", Int. Oral. Surg., 10, pp. 387-416, 1981.
2. I. Akpinar, F. Demirel, L. Parnas and D. Sahin, "A comparison of stress and strain distribution characteristics of two different rigid implant designs for distal extension fixed prostheses", Quintessence Int., 21, pp. 563-570, 1996.
3. G.H. Atmaran and H. Mohammed, "Stress analysis of single tooth implants I. Effect of elastic parameters and geometry of implant", Implantologist, 3, pp. 24-29, 1983-84a.
4. G.H. Atmaran and H. Mohammed, "Stress analysis of single tooth implants II. Effect of implant root-length variation and pseudo periodontal ligament incorporation", Implantologist, 3, pp. 58-62, 1983-84b.
5. P. Ausiello, A. Apicella, C. L. Davidson and S. Rengo, "3D-finite element analysis of cusp movements in a human premolar, restores with adhesive resin based composites", J. Biomech., 34, pp. 1269-1277, 2001.
6. C. A. Babbush, J. Kent and D. Misiek, "Titaniumplasma-sprayed (TPS) screw implants for the reconstruction of the edentulous mandible", J. Oral. Maxillofac. Surg., 44, pp. 274-282, 1986.
7. T. Baiamonte, M. F. Abbate, F. Pizzarello, J. Lozada and R. James, "The experimental verification of the efficacy of finite element model to dental implant systems", J. Oral Implantol., 22(2), pp. 104-110, 1996.
8. L. Borchers and P. Reichart, "Three dimensional stress distribution around a dental implant at different stages of interface development", J. Dent. Res., 62, pp. 155-159, 1983.
9. J. B. Brunski, "Avoid pitfalls of overloading andmicromotion on intraosseaous implants", Dent. Implantol. Update., 6(9), pp. 15-22, 1993.
10. M. Chiapasco, S. Abati, E. Romeoand G. Vogel, "Implant-retained mandibular overdentures with branemark system MkII implants: a prospective comparative study between delayed and immediate loading", Int. J. Oral. Maxillofac. Implant., 2001.
11. H. J. Chun, S. Y. Cheong, J. H. Han, S. J. Heo, J. P. Chung, I. C. Rhyu, Y. C. Choi, H. K. Baik and M. H. Kim, "Evaluation of design parameters of osseintegrated dental implants using finite element analysis", J. Oral Rehabil., 29(6), pp. 565-574, 2002.
12. L. Colomina, "(Lino Esteve) Immediate loading of implant-fixed mandibular prostheses: a prospective 18-month follow-up clinical study", Implant. Dent., 10, pp. 23-29, 2001, Preliminary report.
13. S. D. Cook, A.M. Weinstein and J. J. Klawitter, "A three dimensional finite element analysis of a porous rooted Co-Cr-Mo alloy dental implant", J. Dent. Res., 61, pp. 25-29, 1982.
14. M. Cruz, T. Wassall, E. M. Toledo, L. P. Barra and A. C. Lemonge, "Three-dimensional finite element stress analysis of a cuneiformgeometry implant", Int. J. Oral Maxillofac. Implant, 18(5), pp. 675-684, 2003.
15. D. H. DeTolla, S. Andreana, A. Patra, R. Buhite and B. Comella, "Role of the finite element model in dental implants", J. Oral Implantol., 26(2), pp. 77-81, 2000.
16. I. Ericsson, H. Nilson, T. Lindh, K. Nilner and K. Randow, "Immediate functional loading of Branemark single tooth implants. An 18 months' clinical pilot follow-up study", Clin. Oral Implant. Res., 11(1), pp. 26-33, 2000a, Feb.
17. I. Ericsson, K. Randow, K. Nilner and A. Peterson, "Early functional loading of Branemark dental implants: 5-year clinical follow-up study", Clin. Implant. Dent. Relat. Res., 2(2), pp. 70-77, 2000b.
18. F. G. Evans, F. G. Evans, Ed., Springfield, Illinois: Charles C. Thomas, 1973. European Patent EP 0 893 105 A1.
19. D. Flanagan, "External and occlusal trauma to dental implants and a case report", Dent. Traumatol., 19, pp. 160-164, 2003.
20. F. Genna, C. Paganelli, S. Salgarello and P. Sapelli, "Mechanical response of bone under short-term loading of a dental implant with an internal layer simulating the nonlineal behaviour of the periodonal ligament", Comput. Meth. Biomech. Biomed Eng., 6(5-6), pp. 305-318, 2003, Oct-Dec.
21. Hibbit, Karlsson & Sorensen, Inc., 1080 Main Street, Pawtucket, RI 02680-4847, USA.
22. R.A. Jaffin, A. Kumar and C. L. Berman, "Immediate loading of implants in partially and fully edentulous jaws: a series of 27 case reports", J. Periodontol., 71(5), pp. 833-838, 2000, May.
23. Jian-Ping Geng, B. C. Tan Keson and Liu Gui-Rong, "Application of finite element analysis in implant dentistry: A review of the literature", J. Prosthetic Dent., 85(6), pp. 585-598, 2001.
24. M. L. Jones, J. Hickman, J. Middleton, J. Knox and C. Volp, "Avalidated finite element method study of orthodontic tooth movement in the human subject", J. Orthod., 28(1), pp. 29-38, 2001.
25. C. Karabuda, O. Ozdemir, T. Tosun, A. Anil and V. Olgac, "Histological and clinical evaluation of three different grafting materials for sinus lifting procedure based in 8 cases", J. Periodontol., 26(4), pp. 291-299, 2001.
26. M. Kregze, "A method of selecting the best implant prosthesis design option using three-dimensional finite element analysis", Int. J. Oral Maxillofac. Implant., 8(6), pp. 662-673, 1993.
27. L. Laurell, "Occlusal forces and chewing ability in dentitions with crossarch bridges", Swed. Dent. J. Suppl., 26, p. 160, 1985.
28. P. D. Ledermann and Schroeder, "Stegprothetische Versorgung des zahnlosen Unterkiefers mit Hilfe von plasmabeschichteten Titan-schraubenimplantaten", Dtsch Zahnärztl, 34, pp. 907-911, 1979.
29. J. Lenz, Q. Rong, K. Schweizerhof, H. J. Schindler and D. Riediger, "FE-simulation of bone modeling around an implant in the mandible in two-stage versus one-stage implantation", Biomed. Technol. (Berl.), 47(Suppl. 1, Part 1), pp. 298-301, 2002.
30. G. Limbert, J. Middleton, J. Laizans, M. Dobelis and I. Knets, "A transversely isotropic hyperelastic constitutive model of the PDL. Analytical and computational aspects", Comput Method. Biomech. Biomed. Eng., 6(6-6), pp. 337-345, 2003, Oct-Dec.
31. H. Martinez, M. Davarpanah, P. Missika, R. Celleti and R. Lazzara, "Optimal Implant stabilization in low density bone", Clin. Oral Implant. Res., 12(5), pp. 423-432, 2001.
32. K. A. Meroueh, F. Watanabe and P. J. Mentag, "Finite element analysis of partially edentulous mandible rehabilitation with an osteointegrate cylindrical implant", J. Oral Implantol., 13, pp. 215-238, 1987.
33. J. Middleton, M. Jones and A. Wilson, "The role of the periodontal ligament in bone modeling: the initial development of a timedependent finite element model", Am. J. Orthod. Dentofacial Orthop., 109(2), pp. 155-162, 1996, Feb.
34. H. Miura, S. Haseqawa, D. Okada and H. Ishihara, "The measurement of physiological tooth displacement in function", J. Med. Dent. Sci., 45(2), pp. 103-115, 1998, June.
35. H. Mohemmed, G. H. Atmaram and F. J. Schoen, "Dental implant design: a critical review", J. Oral Implantol., 8, pp. 393-410, 1979.
36. R. W. Ogden, "Large deformation isotropic elasticity: on the correlation of theory and experiments for incompressible rubberlike solids", Proc. R. Soc., A(326), 1972.
37. A. Piattelli, M. Corigliano, A. Scarano, G. Costigliola and M. Paolantonio, "Immediate loading of titanium plasma-sprayed implants: an histologic analysis in monkeys", J. Periodontol., 69(3), pp. 321-327, 1998, Mar.
38. L. Pierrisnard, G. Hure, M. Barquins and D. Chappard, "Two dental implants design for immediate loading: a finite element analysis", Int. J. Oral Maxillofac. Implant., 17(3), pp. 353-362, 2002, May-June.
39. G. Romanos, C. G. Toh, C. H. Siar, D. Swaminathan and A. H. Ong, "Histologic and histomorphometric evaluation of peri-implant bone subjected to immediate loading: an experimental study with macaca fascicularis", Int. J. Oral Maxillofac. Implant., 17, pp. 44-51, 2002.
40. S. Sahin, M. C. Cehreli and E. Yalcin, "The influence of functional forces on the biomechanics of implant supported prostheses-a review", J. Dent., 30, pp. 271-282, 2002.
41. R. L. Sakaguchi and S. E. Borgersen, "Nonlineal finite element contact analysis of dental implant components", Int. J. Oral Maxillofac. Implant., 8(6), pp. 655-661, 1993.
42. R. L. Sakaguchi and S. E. Borgersen, "Nonlineal contact analysis of preload in dental implants screws", Int. J. Oral Maxillofac. Implant., 10(3), pp. 295-302, 1995, May-June.
43. M. Semlisch, "Titanium, Aluminium, Niobium alloy, development for Viocompatible high strength surgical implants", Sunderduck aus Biomedinizinische Technik, 30(12), pp. 334-339, 1985.
44. C.M. Stanford, "Biomechanical and functional behavior of implants", Adv. Dent. Res., 13, pp. 88-92, 1999.
45. K. G. Strid, "Radiographic results", in Tissue-integrated prostheses: Osseointegration in Clinical Dentistry. P. I. Brånemark, G. A. Zarb and T. Albrektsson, Eds., Chicago: Quintessence Publishing Co., Inc., 1985, pp. 187-198.
46. S. Szmukler-Moncler, H. Salama, Y. Reingewirtz and J. H. Dubruille, "Timing of loading and effect of micromotion on bone-dental implant interface: review of experimental literature", Biomed. Mater. Res., 43(2), pp. 192-203, 1998, Summer.
47. A. M. Weinstein, J. J. Klawitter, S. C. Anand and R. Schuessler, "Stress analysis of porous rooted dental implants", J. Dent. Res., 55, pp. 772-777, 1976.
48. K. R. Williams and W. M. Murphy, "A finite element stress analysis of the transmandibular implant system", Int. J. Prosthodont., 14, pp. 115-119, 2001.
49. K. R. Williams, C. J. Watson, W. M. Murphy, J. Scott, M. Gregory and D. Sinobad, "Finite element analysis of fixed prostheses attached to osseointegrated implants", Quintessence Int., 21, pp. 563-570, 1990.
50. J. Wolff, "Uber die innere architektur der knoche und ihre dedeutung für dir Frage vom knochewachstum", Virchows Arch. Path. Anat. Physiol., 50, pp. 389-453, 1870.
51. O. C. Zienkiewicz and R. L. Taylor, The Finite Element Method, 4th ed. New York: McGraw-Hill, 1989, Vol. 1 and 2.