Electric-field assisted processing of ceramics - Part II: Electrophoretic impregnation used for the manufacturing of glass and ceramic functionally graded materials

CFI Ceramic Forum International

Volumn 81, Issue 4, 2004, Pages

  Oetzel, Christian ^a   Clasen, Rolf ^b   Tabellion, Jan ^b  

^a SAARLAND UNIVERSITY   (Germany)

^b NONE

Author keywords

Electrophoretic deposition; Electrophoretic impregnation; Functionally graded materials

Indexed keywords

CHEMICAL VAPOR DEPOSITION; CRACK INITIATION; ELECTRIC FIELD EFFECTS; ELECTROPHORESIS; FIBER REINFORCED MATERIALS; FUNCTIONALLY GRADED MATERIALS; HEAT RESISTANCE; IMPREGNATION; PHYSICAL VAPOR DEPOSITION; POROUS MATERIALS; RAMAN SPECTROSCOPY; SCANNING ELECTRON MICROSCOPY; SHRINKAGE; SILICA; SINTERING; ZIRCONIA;

DRY-PRESSING PROCESS; ELECTROPHORETIC DEPOSITION; ELECTROPHORETIC IMPREGNATION; FIBER-REINFORCED CERAMICS;

CERAMIC MATERIALS;

EID: 2442717524     PISSN: 01739913     EISSN: None     Source Type: Trade Journal    
DOI: None     Document Type: Article

References (36)

1. Gao, J. W. and Wang, C. Y.: Modeling the solidification of functionally graded materials by centrifugal casting, Mater. Sci. Eng. A292 (2000) 207-215
2. Noda, N.: Thermal stresses in functionally graded materials., J. Thermal Stresses 22 (1999) 477-512
3. Ruys, A. J., Kerdic, J. A. and Sorrell, C. C.: Thixotropic casting of ceramic-metal functionally gradient materials, J. Mater. Sci. 31 (1996) 4347-4355
4. Put, S., Vleugels, J. and Biest, O. V. d.: Functionally graded WC-Co materials produced by electrophoretic deposition, Scripta Materialla 45 (2001) 1139-1145
5. Neubrand, A.: Gradientenwerkstoffe - ein Zwischenresümee nach 10 Jahren internationaler Forschung, Verbundswerk-stoffe und Werkstoffverbunde, K. Schulte (ed.). (1999), Hamburg, p. 291-300
6. th Annual Conference on Composites, Advanced Ceramics, Materials and Structures, H.-T. Lin and M. Singh (ed.). Vol. 23. (2002), Cocoa Beach, Florida, USA: The American Ceramic Society, p. 617-627
7. Rogier, R. and Pernot, F.: Glass-ceramic-metal composites for making graded seals In prosthetic devices, J. Mater. Sci.: Mater. Med. 2 (1991) 153-161
8. MacChesney, J. B. and DiGiovanni, D.: Materials Development of Optical Fiber, J. Am. Ceram, Soc. 73 (1990) 3537-3555
9. Tang, E. Z., Etsell, T. H. and Ivey, D. G.: A New Vapor Deposition Method to Form Composite Anodes for Solid Oxide Fuel Cells, J. Am. Ceram. Soc. 83 (2000) 1626-1632
10. Steele, B. C. H.: Materials for IT-SOFC stacks 35 years R&D: the inevitability of gradualness?, Solid State Ionics 134 (2000) 3-20
11. Koizumi, M. and Niino, M.: Overview of FGM research in Japan, MRS Bulletin (1995) 19-46
12. Kesler, O., Matejicek, J., Sampath, S., Suresh, S., Gnaeupel-Herold, T., Brand, P. C. and Prask, H. J.: Measurement of residual stress in plasma-sprayed metallic, ceramic and composite coatings, Mater. Sci. Eng. A 257 (1998) 215-224
13. Hirai, T. and Chen, L.: Recent and prospective development of functionally graded materials in Japan, Mater. Sci. Forum 308-311 (1999) 509-514
14. Ravichandran, K. S.: Thermal residual stresses in a functionally graded material system, Mater. Sci. Eng. A 201 (1995) 269-276
15. Sarkar, P., Huang, X. and Nicholson, P. S.: Zirconia/Alumina Functionally Cradiented Composites by Electrophoretic Deposition Techniques, J. Am. Ceram. Soc. 76 (1993) 1055-1056
16. Torrecillas, R., Espino, A. M., Bartolome, J. F. and Moya, J. S.: Functionally graded zircon-molybdenum materials without residual stresses, J. Am. Ceram. Soc. 83 (2000) 454-456
17. Chu, J., Ishibashi, H., Hayashi, K., Takebe, H. and Morinaga, K.: Slip casting of continuous functionally gradient material, J. Ceram. Soc. Jpn. 101 (1993) 818-820
18. Marple, B. R. and Boulanger, J.: Graded casting of materials with continuous gradients, J. Am. Ceram. Soc. 77 (1994) 2747-2750
19. 3 composites, J. Mater. Res. 8 (1993) 2004-2013
20. Moritz, T., Werner, G., Tomandl, G., Mangler, M., Eichler, H., Lembke, U. and Hauffe, W.: Characterization of thin ceramic layers with a graded pore structure., Mater. Sci. Forum 308-311 (1999) 884-889
21. Mortensen, A. and Suresh, S.: Functionally graded metals and metal-ceramic composites: Part 1. Processing, Int. Mater. Rev. 40 (1995) 239-265
22. Neubrand, A. and Rödel, J.: Gradient material: An overview of a novel concept, Z. Metallkd. 88 (1997) 358-371
23. nd Int. Conf. on Powder Processing Science, H. Hausner, G. L. Messing and S. Hirano (ed.). (1988), Berchtesgaden, 12.-14. 10. 1988: Deutsche Keramische Gesellschaft, Köln. p. 633-640
24. Haber, S.: Deep Electrophoretic Penetration and Deposition of Ceramic Particles Inside Impermeable Porous Substrates, J. Colloid Interface Sci. 179 (1996) 380-390
25. Moritz, K. and Müller, E.: Electrophoretic infiltration of woven carbon fibre mats with SiC powder suspensions, Key Engineering Materials 206-213 (2002) 193-196
26. Smeets, K., Tabellion, J. and Clasen, R.: Modification of green bodies by incorporating nanosized particles via electrophoretic deposition (EPD), Key Engineering Materials 206-213 (2002) 2069-2072
27. th Annual Conference on Composites, Advanced Ceramics, Materials and Structures, H.-T. Lin and M. Singh (ed.). Vol. 23. (2002), Cocoa Beach, Florida, USA: The American Ceramic Society, p. 577-584
28. Tabellion, J., Oetzel, C. and Clasen, R.: Densification of porous ceramics and glasses by electrophoretic impregnation, Electrochem. Soc. Proc. 21 (2002) 31-38
29. Boccaccini, A. R., Kaya, C. and Krüger, H.-C.: Elektrophoretische Abscheidung zur Herstellung von faserver-stärkten Keramik- und Ciasmatrix-Verbundwerkstoffen - Eine Übersicht, Chem.-Ing. Tech. 73 (2001) 443-452
30. Moritz, K., Tabellion, J. and Clasen, R.: Elektrophoretische Abscheidung keramischer Feinst- und Nanopulver - Anwen-dungen als Formgebungsverfahren und Infiltrationsmethode, Fortschrittsber. Dtsch. Keram. Ges. 17 (2002) 48-55
31. Kreibig, U. and Vollmer, M.: Optical Properties of Metal Clusters. Springer Series in Material Science, ed. U. Gonser, R. M. Osgold, M. B. Panish and H. Sakaki. Vol. 25. Springer Verlag, Berlin-Heidelberg, 1995, p. 532
32. Adair, J. H., Li, T., Kido, T., Havey, K., Moon, J., Mecholsky, J., Morrone, A., Talham, D. R., Ludwig, M. H. and Wang, L.: Recent developments in the preparation and properties of nanometer-size spherical and platelet-shaped particles and composite particles, Mat. Sci. Eng. R 23 (1998) 139-242
33. to be published: "Tabellion, J. and Clasen, R.: Electrophoretic deposition from aqueous suspensions for near-shape manufacturing of advanced ceramics and glasses - applications, J. Mater. Sci. 39 (2004)"
34. Rabinovich, E. M.: Review: Preparation of glass by sintering, J. Mater. Sci. 20 (1985) 4259-4297
35. Tabellion, J., Clasen, R., Reinshagen, J., Oberacker, R. and Hoffmann, M. J.: Correlation between suspension structure and rheological properties of suspensions of nanosized fumed silica powders, International Conference on Advanced Ceramics and Classes, (ed.). (2001).
36. Batteas, J. T., Quan, X. and Weldon, M. K.: Adhesion and wear of colloidal silica probed by force microscopy, Tribol. Lett. 7 (1999) 121-128