Environmental fatigue of pultruded glass-fiber-reinforced composites

ASTM Special Technical Publication

Volumn , Issue 1330, 1999, Pages 217-234

  Liao, Kin ^a   Schultheisz, Carl R ^b   Hunston, Donald L ^b   Brinson, L Catherine ^c  

^a NANYANG TECHNOLOGICAL UNIVERSITY   (Singapore)

^b NATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY   (United States)

^c Northwestern University   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

BENDING STRENGTH; CYCLIC LOADS; DURABILITY; FATIGUE TESTING; INTERFACES (MATERIALS); LIFE CYCLE;

ENVIRONMENTAL FATIGUE;

GLASS FIBER REINFORCED PLASTICS;

EID: 0033363289     PISSN: 10403094     EISSN: None     Source Type: Conference Proceeding    
DOI: None     Document Type: Conference Paper

References (67)

1. Chambers, R. E., "Structural Fiber Glass-Reinforced Plastics for Building Applications," Plastics in Buildings, I. Skeist Ed., Reinhold Publishing Co., New York, 1965, pp. 72-118.
2. Hollaway, L., Glass Reinforced Plastics in Construction, John Wiley & Sons, New York, 1978.
3. Makowski, Z. S., "Symbiosis of Architecture and Engineering in the Development of Structure Uses of Plastics," in Plastics in Material and Structural Engineering, Elsevier Scientific Publishing Co., New York, 1982, pp. 59-72.
4. Starr, T. F., "Structural Applications for Pultruded Profiles," Composite Structures, Vol. 22, I. H. Marshall Ed., Applied Science Publishers, New York, 1983, pp. 192-211.
5. Green, A., "Glass-Fiber-Reinforced Composites in Building Construction," Transportation Research Record 1118, Transportation Research Board, Washington, DC, 1987, pp. 73-76.
6. Barbero, E. and GangaRao, H. V. S., "Structural Applications of Composites in Infrastructure, Part I," SAMPE Journal, Vol. 27, No. 6, November/December 1991, pp. 9-16.
7. Barbero, E. and GangaRao, H. V. S., "Structural Applications of Composites in Infrastructure, Part II," SAMPE Journal, Vol. 28, No. 1, January/February 1992, pp. 9-16.
8. GangaRao, H. V. S. and Barbero, E., "Construction, Structural Applications," in International Encyclopedia of Composites, Vol. 6, VCH, New York, 1991, pp. 173-176.
9. Advanced Composite Materials in Civil Engineering Structures, S. L. Iyer and R. Sen, Eds., American Society of Civil Engineers, New York, 1991.
10. Infrastructure: New Materials and Methods of Repair, Proceedings of the Third Materials Engineering Conference, K. D. Basham Ed., San Diego, California, 13-16 Nov. 1994.
11. Fiber Composites in Infrastructure, Proceedings of the First International Conference on Composites in Infrastructure (ICCI '96), H. Saadatmanesh and M. R. Ehsani, Eds., Tucson, Arizona, 5-7 Jan. 1996.
12. Sprecher, N., "Composites and Buildings: New Applications," Composites, Plastiques Reinforces, Fibres De Verre Textile, Vol. 32, No. 3, 1992, pp. 250-263.
13. Green, A., Bisarnsin, T., and Love, E. A., "Pultruded Reinforced Plastics for Civil Engineering Structural Applications," Proceedings, 47th Annual Conference, Composites Institute, The Society of the Plastics Industry, Inc., Cincinnati, OH: February 1992, Section 15-B.
14. Tsuji, Y., Kanda, M., and Tamura, T., "Applications of FRP Materials to Prestressed Concrete Bridges and Other Structures in Japan," PCI Journal, July-August 1993, pp. 50-58.
15. Salama, M. M., "Advanced Composites for the Offshore Industry: Applications and Challenges," Revue De L'Institut Francais Du Petrole, Vol. 50, No. 1, January-February 1995, pp. 19-26.
16. Tarricone, P. "Composite Sketch," Civil Engineering, May 1995, pp. 52-55.
17. "High-Performance Construction Materials and Systems: An Essential Program for America and Its Infrastructure," Executive Report 93-5011.E, The Civil Engineering Research Foundations, April 1993.
18. Loud, S., "Three Steps Toward a Composites Revolution in Construction," SAMPE Journal, Vol. 32, No. 1, January/February, 1996, pp. 30-35.
19. Harris, B., "Fatigue and Accumulation of Damage in Reinforced Plastics," Composites, October 1977, pp. 214-220.
20. Stinchcomb, W. W. and Reifsnider, K. L., "Fatigue Damage Mechanisms in Composite Materials: A Review," Fatigue Mechanisms, ASTM STP 675, American Society for Testing and Materials, West Conshohocken, PA, 1979, pp. 762-787.
21. Agarwal, B. D. and I. J. Broutman, in Analysis and Performance of Fiber Composites, John Wiley & Sons, New York, 1980.
22. Konur, O. and Matthews, F. L., "Effect of the Properties of the Constituents on the Fatigue Performance of Composites: a Review," Composites, Vol. 20, No. 4, July 1989, pp. 317-328.
23. Romanenkov, I. G., "Dependence of the Mechanical Properties of GRPs on their Water Absorption," Soviet Plastics, Vol. 2, 1967, pp. 74-75.
24. Pritchard, G. and Taneja, N., "Water Damage in Polyester/Glass Laminates, Part II: Microscopic Evidence," Composites, Vol. 4, No. 4, 1973.
25. Bonniau, P. and Bunsell, A. R., "Water Absorption by Glass Fibre Reinforced Epoxy Resin," Composite Structures, I. H. Marshall, Ed., 1981, pp. 92-105.
26. Martin, J. R. and Gardneer, R. J., "Effect of Long Term Humid Aging on Plastics," Polymer Engineering and Science, Vol. 21, No. 9, June 1981, pp. 557-565.
27. Apicella, A., Migliaresi, C., Nicodemo, L., Nicolais, L., Iaccarino, L., and Roccotelli, S., "Water Sorption and Mechanical Properties of a Glass-Reinforced Polyester Resin," Composites, October 1982, pp. 406-410.
28. Garg, A. C. and Pawar, S. K., "Environmental Effect on Fracture of Glass Fibre Reinforced Polyester," Fibre Science and Technology, Vol. 17, 1982, pp. 133-139.
29. Garg, A. C. and Paliwal, V., "Effect of Water on the Fracture Behavior of Glass Fibre Reinforced Polyester," Fibre Science and Technology, Vol. 17, 1982, pp. 63-69.
30. Rege, S. K. and Lakkad, S. C., "Effect of Salt Water on Mechanical Properties of Fibre Reinforced Plastics," Fibre Science and Technology, Vol. 19, 1983, pp. 31-324.
31. Komai, K., Minoshima, K., and Shiroshita, S., "Hygrothermal Degradation and Fracture Process of Advanced Fibre-Reinforced Plastics," Materials Science and Engineering, A143, 1991, pp. 155-166.
32. Sekine, H., Shimomura, K., and Hamana, N., "Strength Deterioration and Degradation Mechanism of Glass Chopped Reinforced Plastics in Water Environment," ISME International Journal, Series I, Vol. 31, No. 3, 1988, pp. 619-626.
33. Bradley, W., Chiou, P. B., and Grant, T., "The Effect of Seawater on Polymeric Composite Materials," Composite Materials for Offshore Operations: Proceedings of the First International Workshop, NIST Special Publication 887, S. S. Wang and D. W. Fitting, Eds., National Institute of Standards and Technology, August 1995, pp. 193-202.
34. Grami, M., Moilanen, M. J., and Rosenow, M. W. K., "Environmental Degradation of Glass Fibers in Polyurethane Matrix Composites," Proceedings of ICCM-10, Vol. VI, Whistler, B.C., Canada, August 1995.
35. Charles, R. J., "Static Fatigue of Glass. I," Journal of Applied Physics, Vol. 29, No. 11, November 1958, pp. 1549-1553.
36. Charles, R. J., "Static Fatigue of Glass. II," Journal of Applied Physics, Vol. 29, No. 11, November 1958, pp. 1554-1560.
37. Schmitz, G. K. and Metcalfe, A. G., "Stress Corrosion of E-Glass Fibers," I&EC Product Research and Development, Vol. 5, No. 1, March 1966, pp. 1-8.
38. Metcalfe, A. G. and Schmitz, G. K., "Mechanism of Stress Corrosion in E-Glass Filaments," Glass Technology, Vol. 13, No. 1, February 1972, pp. 5-16.
39. Vauthier, E., Chateauminois, A., and Bailliez, T., "Hygrothermal Aging and Durability of Unidirectional Glass-Epoxy Composites," Proceedings, 10th International Conference of Composite Materials, Vol. VI, August 1995, pp. 185-192.
40. Carswell, W. S. and Roberts, R. C., "Environmental Fatigue Stress Failure Mechanism for Glass Fibre Mat Reinforced Polyester," Composites, April 1980, pp. 95-99.
41. Hofer, K. E., Skaper, G. N., and Bennett, L. C., "Effect of Moisture on Fatigue and Residual Strength Losses for Various Composites," Journal of Reinforced Plastics and Composites, Vol. 6, January 1987, pp. 53-65.
42. Watanabe, M., "Effect of Water Environment on Fatigue Behavior of Fiberglass Reinforced Plastics," Composite Materials: Testing and Design (Fifth Conference), ASTM STP 674, S. W. Tsai, Ed., American Society for Testing and Materials, West Conshohocken, PA, 1979, pp. 345-367.
43. Fried, N., "Degradation of Composite Materials: The Effect of Water on Glass-Reinforced Plastics," Mechanics of Composite Materials, Proceedings of the Fifth Symposium on Naval Structural Mechanics, F. W. Wendt, H. Liebowitz, and N. Perrone, Eds., Pergamon Press, New York, 1967, pp. 813-837.
44. Hofer, K. E., Jr., Benett, L. C., and Stander, M., "Effect of Various Fiber Surface Treatments on the Fatigue Behavior of Glass Fabric Composites in High Humidity Environment," Proceedings, 31st Annual Technical Conference of SPI, Washington, DC, February 1976, Section 6-A.
45. Shih, G. C. and Ebert, L. J., "The Effect of the Fiber/Matrix Interface on the Flexural Fatigue Performance of Unidirectional Fiberglass Composites," Composites Science and Technology, Vol. 28, 1987, pp. 147-161.
46. Boller, K. H., "Fatigue Characteristics of RP Laminates Subjected to Axial Loading," Modern Plastics, June 1964, pp. 145-188.
47. Dally, J. W. and Carrillo, D. H., "Fatigue Behavior of Glass-Fiber Fortified Thermoplastics," Polymer Engineering and Science, November 1969, Vol. 9, No. 6, pp. 434-444.
48. Hashin, Z. and Rotem, A., "A Fatigue Failure Criterion for Fiber Reinforced Materials," Journal of Composite Materials, Vol. 7, 1973, pp. 448-464.
49. Amijima, S. and Tanimoto, T., "The Effect of Glass Content and Environment Temperature on the Fatigue Properties of Laminated Glass Fiber Composite Materials," Mechanical Behavior of Materials, Proceedings of the 1971 International Conference on Mechanical Behavior of Materials, Vol. V, The Society of Materials Science, Kyoto, Japan, 1972, pp. 269-278.
50. Owens, M. J., "Fatigue Damage in Glass-Fiber-Reinforced Plastics," in Composite Materials: Fracture and Fatigue, Vol. 5, L. Broutman, Ed., Academic Press, New York, 1974, pp. 313-341.
51. Dharan, C. K. H., "Fatigue Failure Mechanisms in a Unidirectionally Reinforced Composite Material," Fatigue of Composite Materials, ASTM STP 569, American Society for Testing and Materials, West Conshohocken, PA, 1975, pp. 171-188.
52. Davis, J. W. and Sundsrud, G. J., "Fatigue Data on a Variety of Nonwoven Glass Composites for Helicopter Rotor Blades," Composite Materials: Testing and Design (Fifth Conference), ASTM STP 674, S. W. Tsai, Ed., American Society for Testing and Materials, West Conshohocken, PA, 1979, pp. 137-148.
53. Mandell, J. F., Huang, D. D., and McGarry, F. J., "Tensile Fatigue Performance of Glass Fiber Dominated Composites," Composites Technology Review, Vol. 3, No. 3, Fall 1981, pp. 96-102.
54. Reifsnider, K. L., Schulte, K., and Duke, J. C., Jr., "Long-Term Fatigue Behavior of Composite Materials," Long-Term Behavior of Composites, ASTM STP 813, T. K. O'Brien, Ed., American Society for Testing and Materials, West Conshohocken, PA, 1983, pp. 136-159.
55. Jessen, S. M. and Plumtree, A., "Fatigue Damage Accumulation in Pultruded Glass/Polyester Rod," Composites, Vol. 20, No. 6, November 1989, pp. 559-567.
56. Xiao, J. and Bathias, C., "Fatigue Behavior of Unnotched and Notched Woven Glass/Epoxy Laminates," Composites Science and Technology, Vol. 50, 1994, pp. 141-148.
57. Echtermeyer, A. T., Engh, B., and Buene, L., "Lifetime and Young's Modulus Changes of Glass/ Phenolic and Glass/Polyester Composites Under Fatigue," Composites, Vol. 26, No. 1, 1995.
58. Donaldson, S. L. and Kim, R. Y., "Life Prediction of Glass/Vinylester and Glass/Polyester Composites Under Fatigue Loading," Proceedings of ICCM-10, Vol. I, Whistler, B. C., Canada, August 1995, pp. 577-584.
59. Jones, C. J. Dickson, R. F., Adam, T., Reiter, H., and Harris, B., "Environmental Fatigue of Reinforced Plastics," Composites, Vol. 14, No. 3, July 1983, pp. 288-293.
60. Fesko, D. G., "Flexural Fatigue of Unidirectional Fiberglass-Reinforced Polyester," Polymer Engineering and Science, Vol. 17, No. 4, April 1977, pp. 242-245.
61. Romans, J. B., Sands, A. G., and Cowling, J. E., "Fatigue Behavior of Glass-Filament-Wound Epoxy Composites in Water," Naval Research Laboratory Report 7246, April 1971.
62. Smith, E. W. and Pascoe, K. J., "The Role of Shear Deformation in the Fatigue Failure of Glass Fibre-Reinforced Composites," Composites, October 1977, pp. 237-243.
63. Bevan, L. G., "Axial and Short Beam Shear Fatigue Properties of CFRP Laminates," Composites, October 1977, pp. 227-232.
64. Sims, D. F. and Brogdon, V. H., "Fatigue Behavior of Composites Under Different Loading Modes," Fatigue of Filamentary Composite Materials, ASTM STP 636, K. L. Reifsnider and K. N. Lauraitis, Eds., American Society for Testing and Materials, West Conshohocken, PA, 1977, pp. 185-205.
65. Agarwal, B. D. and Joneja, S. K., "Strain-Controlled Flexural Fatigue of Unidirectional Composites," Composites Technology Review, Vol. 4, No. 1, Spring 1982, pp. 6-13.
66. Newaz, G. M., "Fatigue Damage Growth Rate in Unidirectional Composites in Flexural Loading," Journal of Materials Science Letters, Vol. 4, 1985, pp. 197-199.
67. Phillips, D. C. and Scott, J. M., "The Shear Fatigue of Unidirectional Fibre Composites," Composites, October 1977, pp. 233-236.