-
1
-
-
0023438354
-
Multiaxial fatigue damage models
-
D. F. Soci (1987) Multiaxial fatigue damage models. ASME J. Engng Mater. Tech. 109, 293-298.
-
(1987)
ASME J. Engng Mater. Tech.
, vol.109
, pp. 293-298
-
-
Soci, D.F.1
-
4
-
-
0021505121
-
The hardening and rate-dependent behavior of fully annealed AISI type 304 stainless steel under in-phase and out-of-phase strain cycling at room temperature
-
E. Krempl and H. Lu (1984) The hardening and rate-dependent behavior of fully annealed AISI type 304 stainless steel under in-phase and out-of-phase strain cycling at room temperature. ASME J. Engng Mater. Tech. 106, 376-382.
-
(1984)
ASME J. Engng Mater. Tech.
, vol.106
, pp. 376-382
-
-
Krempl, E.1
Lu, H.2
-
5
-
-
0344923636
-
Damage analysis of low cycle fatigue under nonproportional loading
-
X. Chen, Q. Gao and X.-F. Sun (1994) Damage analysis of low cycle fatigue under nonproportional loading. Int. J. Fatigue 16, 211-215.
-
(1994)
Int. J. Fatigue
, vol.16
, pp. 211-215
-
-
Chen, X.1
Gao, Q.2
Sun, X.-F.3
-
6
-
-
0016556829
-
A practical two surface plasticity theory
-
R. D. Krieg (1975) A practical two surface plasticity theory. ASME J. Appl. Mech. 28, 641-646.
-
(1975)
ASME J. Appl. Mech.
, vol.28
, pp. 641-646
-
-
Krieg, R.D.1
-
7
-
-
0017269081
-
Plastic internal variables formalism in cyclic plasticity
-
Y. E. Dafalias and V. P. Popov (1976) Plastic internal variables formalism in cyclic plasticity. ASME J. Appl. Mech. 43, 645.
-
(1976)
ASME J. Appl. Mech.
, vol.43
, pp. 645
-
-
Dafalias, Y.E.1
Popov, V.P.2
-
8
-
-
0001219426
-
Fundamental consequences of a new intrinsic time measure: Plasticity as a limit of the endochronic theory
-
K. C. Valanis (1980) Fundamental consequences of a new intrinsic time measure: plasticity as a limit of the endochronic theory. Arch. Mech. 27, 171-191.
-
(1980)
Arch. Mech.
, vol.27
, pp. 171-191
-
-
Valanis, K.C.1
-
9
-
-
0026057296
-
On the properties of plastic flow of material under nonproportional cyclic loading
-
J. Ning and X. Chen (1991) On the properties of plastic flow of material under nonproportional cyclic loading. Int. J. Solids Struct. 28, 403-412.
-
(1991)
Int. J. Solids Struct.
, vol.28
, pp. 403-412
-
-
Ning, J.1
Chen, X.2
-
10
-
-
0023362687
-
An evaluation of recent developments in hardening and flow rules for rate-independent, nonproportional cyclic plasticity
-
D. L. McDowell (1987) An evaluation of recent developments in hardening and flow rules for rate-independent, nonproportional cyclic plasticity. ASME J. Appl. Mech. 54, 323-334.
-
(1987)
ASME J. Appl. Mech.
, vol.54
, pp. 323-334
-
-
McDowell, D.L.1
-
11
-
-
0024862796
-
A rate-independent constitutive model for transient nonproportional loading
-
F. Ellyin and Z. Xia (1989) A rate-independent constitutive model for transient nonproportional loading. J. Mech. Phys. Solids 37, 71-91.
-
(1989)
J. Mech. Phys. Solids
, vol.37
, pp. 71-91
-
-
Ellyin, F.1
Xia, Z.2
-
12
-
-
3743122628
-
An endochronic constitutive theory of material under nonproportional cyclic loading
-
J. Ning (1991) An endochronic constitutive theory of material under nonproportional cyclic loading. Mech. Res. Commun. 18, 187-198.
-
(1991)
Mech. Res. Commun.
, vol.18
, pp. 187-198
-
-
Ning, J.1
-
13
-
-
0023577946
-
Endochronic theory for structural steel under nonproportional loading
-
K. Sugiura, G. C. Lee and X. C. Chang (1987) Endochronic theory for structural steel under nonproportional loading. ASCE J. Engng Mech. 113, 1901-1917.
-
(1987)
ASCE J. Engng Mech.
, vol.113
, pp. 1901-1917
-
-
Sugiura, K.1
Lee, G.C.2
Chang, X.C.3
-
14
-
-
0004709128
-
Evaluation of low cycle fatigue under nonproportional loading
-
France
-
X. Chen, Q. Gao, A. Abel and S. Wu (1994) Evaluation of low cycle fatigue under nonproportional loading. Proceedings of Fourth Inter. Conference on Multiaxial/Biaxial Fatigue, France, Vol. I, pp. 283-292.
-
(1994)
Proceedings of Fourth Inter. Conference on Multiaxial/Biaxial Fatigue
, vol.1
, pp. 283-292
-
-
Chen, X.1
Gao, Q.2
Abel, A.3
Wu, S.4
-
15
-
-
0023440046
-
Constitutive equations for non-proportional cyclic elasto-viscoplasticity
-
A. Benallal and D. Marquis (1987) Constitutive equations for non-proportional cyclic elasto-viscoplasticity. ASME J. Engng Mater. Tech. 109, 326-336.
-
(1987)
ASME J. Engng Mater. Tech.
, vol.109
, pp. 326-336
-
-
Benallal, A.1
Marquis, D.2
-
16
-
-
3743095865
-
The rule of mean strain on the stress response in nonproportional cyclic plasticity
-
A. Benallal, P. Legallo and D. Marquis (1989) The rule of mean strain on the stress response in nonproportional cyclic plasticity. Plasticity, pp. 342-347.
-
(1989)
Plasticity
, pp. 342-347
-
-
Benallal, A.1
Legallo, P.2
Marquis, D.3
-
17
-
-
0001322863
-
Recent topics in constitutive modeling of cyclic plasticity and viscoplasticity
-
N. Ohno (1990) Recent topics in constitutive modeling of cyclic plasticity and viscoplasticity. Appl. Mech. Rev. 43, 283-295.
-
(1990)
Appl. Mech. Rev.
, vol.43
, pp. 283-295
-
-
Ohno, N.1
-
18
-
-
0022228810
-
Effects of strain path shapes on nonproportional cyclic plasticity
-
E. Tanaka, S. Murakami and M. Ooka (1985) Effects of strain path shapes on nonproportional cyclic plasticity. J. Mech. Phys. Solids 33, 559-575.
-
(1985)
J. Mech. Phys. Solids
, vol.33
, pp. 559-575
-
-
Tanaka, E.1
Murakami, S.2
Ooka, M.3
-
19
-
-
0013024463
-
Constitutive equations describing nonproportional effects in cyclic plasticity
-
Edited by C. S. Desai et al.
-
A. Benallal and D. Marquis (1987) Constitutive equations describing nonproportional effects in cyclic plasticity. In: Constitutive Laws for Engineering Materials: Theory and Applications (Edited by C. S. Desai et al.), pp. 505-512.
-
(1987)
Constitutive Laws for Engineering Materials: Theory and Applications
, pp. 505-512
-
-
Benallal, A.1
Marquis, D.2
-
21
-
-
0002699969
-
On the time of the rupture process under creep conditions
-
L. M. Kachanov (1958) On the time of the rupture process under creep conditions. Izv. Akad, Nauk. SSSR. Otd. Tekh. Nauk, 8, 26-31.
-
(1958)
Izv. Akad, Nauk. SSSR. Otd. Tekh. Nauk
, vol.8
, pp. 26-31
-
-
Kachanov, L.M.1
-
23
-
-
0018495638
-
Application of damage concepts to predict creep-fatigue failures
-
J. Lemaitre and A. Plumtree (1979) Application of damage concepts to predict creep-fatigue failures. ASME J. Engng Mater. Tech. 101, 284-292.
-
(1979)
ASME J. Engng Mater. Tech.
, vol.101
, pp. 284-292
-
-
Lemaitre, J.1
Plumtree, A.2
-
24
-
-
0021317202
-
Fatigue damage in 1045 steel under constant amplitude biaxial loading
-
C. T. Hua and D. F. Socie (1984) Fatigue damage in 1045 steel under constant amplitude biaxial loading. Fatigue Engng Mater. Struct. 7, 165-179.
-
(1984)
Fatigue Engng Mater. Struct.
, vol.7
, pp. 165-179
-
-
Hua, C.T.1
Socie, D.F.2
-
25
-
-
3743068047
-
Continuum damage mechanics applied to multi-axial cyclic material behaviour
-
(Edited by A. C. F. Cocks et al.), Elsevier Applied Science
-
D. A. Lavender and D. R. Hayhurst (1988) Continuum damage mechanics applied to multi-axial cyclic material behaviour. In: Mechanics of Creep Brittle Material-I (Edited by A. C. F. Cocks et al.), pp. 230-244. Elsevier Applied Science.
-
(1988)
Mechanics of Creep Brittle Material-I
, pp. 230-244
-
-
Lavender, D.A.1
Hayhurst, D.R.2
-
26
-
-
0016377719
-
Une loi differentielle d'endommagement de fatigue avec cumulation non lineaire
-
J. L. Chaboche (1974) Une loi differentielle d'endommagement de fatigue avec cumulation non lineaire. Rev. Francaise de Mecanique, pp. 50-51.
-
(1974)
Rev. Francaise de Mecanique
, pp. 50-51
-
-
Chaboche, J.L.1
-
27
-
-
0023979659
-
Continuum damage mechanics: Part II-Damage growth, crack initiation, and crack growth
-
J. L. Chaboche (1988) Continuum damage mechanics: Part II-Damage growth, crack initiation, and crack growth. J. Appl. Mech. 55, 65-72.
-
(1988)
J. Appl. Mech.
, vol.55
, pp. 65-72
-
-
Chaboche, J.L.1
-
28
-
-
0019342758
-
Designing against low-cycle fatigue at elevated temperature
-
S. Majumdar (1981) Designing against low-cycle fatigue at elevated temperature. Nucl. Engng Design 63, 121-135.
-
(1981)
Nucl. Engng Design
, vol.63
, pp. 121-135
-
-
Majumdar, S.1
-
29
-
-
0024016437
-
Biaxial path dependence of deformation substructure of type 304 stainless steel
-
D. L. McDowell, D. R. Stahl, S. R. Stock and S. D. Antolovich (1988) Biaxial path dependence of deformation substructure of type 304 stainless steel. Metall. Trans. 19A, 1277-1293.
-
(1988)
Metall. Trans.
, vol.19 A
, pp. 1277-1293
-
-
McDowell, D.L.1
Stahl, D.R.2
Stock, S.R.3
Antolovich, S.D.4
-
30
-
-
0004705855
-
Fracture mechanisms and life assessment under high-strain biaxial cyclic loading of type 304 stainless steel
-
K. Nitta, T. Ogata and K. Kuwabara (1989) Fracture mechanisms and life assessment under high-strain biaxial cyclic loading of type 304 stainless steel. Fatigue Fract. Engng Mater. Struct. 12, 77-92.
-
(1989)
Fatigue Fract. Engng Mater. Struct.
, vol.12
, pp. 77-92
-
-
Nitta, K.1
Ogata, T.2
Kuwabara, K.3
-
31
-
-
0023854625
-
A critical plane approach to multi-axial fatigue damage including out-of-phase loading
-
A. Fatemi and D. F. Socie (1988) A critical plane approach to multi-axial fatigue damage including out-of-phase loading. Fatigue Engng Mater. Struct. 14, 149-165.
-
(1988)
Fatigue Engng Mater. Struct.
, vol.14
, pp. 149-165
-
-
Fatemi, A.1
Socie, D.F.2
-
32
-
-
0020949273
-
Physical and mechanical measurements of damage in low cycle fatigue application for two level test
-
ASTM STP 811, Eds. K. J. Miller and M. W. Brown
-
G. C. Pluvinage and M. N. Raguet (1983) Physical and mechanical measurements of damage in low cycle fatigue application for two level test. In: Fatigue Mechanisms: Advances in Quantitative Measurement of Physical Damage, ASTM STP 811, Eds. K. J. Miller and M. W. Brown, pp. 139-150.
-
(1983)
Fatigue Mechanisms: Advances in Quantitative Measurement of Physical Damage
, pp. 139-150
-
-
Pluvinage, G.C.1
Raguet, M.N.2
-
34
-
-
84980314050
-
High temperature fatigue damage in three austenitic alloys
-
A. Plumtree and J. O. Nilsson (1988) High temperature fatigue damage in three austenitic alloys. Fatigue Fract. Engng Mater. Struct. 11, 397-407.
-
(1988)
Fatigue Fract. Engng Mater. Struct.
, vol.11
, pp. 397-407
-
-
Plumtree, A.1
Nilsson, J.O.2
-
35
-
-
0021898819
-
Low cycle fatigue properties of a 1045 steel in torsion
-
ASTM STP 853, Eds. K. T. Miller and M. W. Brown
-
G. Leese and J. Morrow (1985) Low cycle fatigue properties of a 1045 steel In torsion. Multiaxial Fatigue, ASTM STP 853, Eds. K. T. Miller and M. W. Brown, pp. 482-496.
-
(1985)
Multiaxial Fatigue
, pp. 482-496
-
-
Leese, G.1
Morrow, J.2
-
36
-
-
0026221783
-
Fatigue predictions for components under biaxial reversed loading
-
Y. L. Lee and Y. J. Chiang (1991) Fatigue predictions for components under biaxial reversed loading. J. Test. Eval. 19, 359-367.
-
(1991)
J. Test. Eval.
, vol.19
, pp. 359-367
-
-
Lee, Y.L.1
Chiang, Y.J.2
-
38
-
-
0023327464
-
On the influence of strain-path in multiaxial fatigue failure
-
H. C. Wu and C. C. Yang (1987) On the influence of strain-path in multiaxial fatigue failure. ASME J. Engng Mater. Tech. 109, 107-113.
-
(1987)
ASME J. Engng Mater. Tech.
, vol.109
, pp. 107-113
-
-
Wu, H.C.1
Yang, C.C.2
|