Fatigue crack growth model for constant amplitude loading

Fatigue and Fracture of Engineering Materials and Structures

Volumn 27, Issue 6, 2004, Pages 459-472

  Pandey, K N ^a   Chand, S ^b  

^a KN Institute of Technology   (India)

^b MOTILAL NEHRU NATIONAL INSTITUTE OF TECHNOLOGY   (India)

Author keywords

Cyclic plastic zone; Fatigue crack growth; Low cycle fatigue properties; Plastic energy dissipation; Specific energy

Indexed keywords

DUCTILITY; ELASTOPLASTICITY; FATIGUE OF MATERIALS; MATERIALS TESTING; MATHEMATICAL MODELS; STRAIN; STRENGTH OF MATERIALS; STRESSES;

CONSTANT AMPLITUDE LOADING; CYCLIC STRESS-STRAIN CURVE; FATIGUE CRACK GROWTH MODEL;

CRACK PROPAGATION;

EID: 2442650571     PISSN: 8756758X     EISSN: None     Source Type: Journal    
DOI: 10.1111/j.1460-2695.2004.00760.x     Document Type: Article

References (62)

1. Duggan, T. V. (1977) A theory of fatigue crack propagation. Engng Fract. Mech. 9, 735-747.
2. Glinka, G. (1985) A notch stress-strain analysis approach to fatigue crack growth. Engng Fract. Mech. 21, 245-261.
3. Glinka, G., Robin, C.; Pluvinage, G. and Chehimi, C. (1984) A cumulative model of fatigue crack growth and the crack closure effect. Int. J. Fatigue 6, 37-47.
4. Glinka, G. (1982) A cumulative model of fatigue crack growth. Int. J. Fatigue 4, 59-67.
5. Lehr, K. R. and Liu, H. W. (1969) Fatigue crack propagation and strain cycling properties. Int. J. Fract. 5, 45-55.
6. Schwalbe, K.-H. (1974) Comparison of several fatigue crack propagation laws with experimental results. Engng Fract. Mech. 6, 325-341.
7. Wu, S.-X., Mai, Y.-W. and Cotterell, B. (1992) A model of fatigue crack growth based on dugdale model and damage accumulation, Int. J. Fract. 57, 253-267.
8. Liu, H. W. (1963) Fatigue crack propagation and applied stress range- An energy approach. Trans. ASME, J. Basic Engng, March, 116-121.
9. Raju, K. N. (1972) An energy balance criterion for crack growth under fatigue loading from considerations of energy plastic deformation. Int. J. Fract. 8, 1-14.
10. Burck, L. H. and Weertman, J. (1976) Fatigue crack propagation in Iron and Mo solid alloys (77 to 296 K). Metall. Trans. A 7, 257-264.
11. Davidson, D. L. and Lankford, J., Jr. (1977) Determination of energy of fatigue crack propagation and its alteration by wet air. In: Environment-Sensitive Fracture of Engineering Materials (Edited by Z. A. Foroulis) Proceedings of a symposium held at the TMS-AIME (The Metallurgical Society of AIME) Fall Meeting in Chicago, Illinois, October 24-26, 581-594.
12. Ikeda, S., Izumi, Y. and Fine, M. E. (1977) Plastic work during fatigue crack propagation in a high strength low alloy steel and in 7050 Al-alloy. Engng Frac. Mech. 9, 123-135.
13. Chakrabarti, A. K. (1978). An energy balance approach to the problem of fatigue crack growth. Engng Frac. Mech. 10, 69-483.
14. Izumi, Y. and Fine, M. E. (1979) Role of plastic work in fatigue crack propagation in metals. Engng Frac. Mech. 11, 791-804.
15. Izumi, Y., Fine, M. E. and Mura, T. (1981) Energy consideration in fatigue crack propagation. Int. J. Fract. 17, 15-25.
16. Liaw, P. K., Fine, M. E. and Davidson, D. L. (1980) Comparison of plastic work of fatigue crack propagation in low carbon steel measured by strain-gages and electron channelling. Fatigue Fract. Engng Mater. Struct. 3, 59-74.
17. Bodner, S. R., Davidson, D. L. and Lankford, J. (1983) A description of fatigue crack growth in terms of plastic work. Engng Fract. Mech. 17, 89-191.
18. Sih, G. C. (1983) The state of affairs near the crack tip. In: Modelling problems in crack tip mechanics, CFC10, University of Waterloo, August 24-26, 65-89.
19. Fine, M. E., Morris, E. and Davidson, D. L. (1984) Quantitative measurement of energy associated with a moving fatigue crack. In: Fatigue Mechanisms, ASTM STP 811. American Society of Testing and Materials, Philadelphia, PA, USA, 350-369.
20. Chand, S. and Garg, S. B. L. (1985) Crack propagation under constant amplitude loading. Engng Fract. Mech. 21, 1-30.
21. Short, J. S. and Hoeppner, D. W. (1989) A global/local theory of fatigue crack propagation. Engng Fract. Mech. 33, 175-184.
22. Nicholls, D. J. (1994) Prediction of fatigue crack growth rates based on crack blunting. Engng Fract. Mech. 48, 9-15.
23. Sehitoglu, H., Gall, K. and Garcia, A. M. (1996) Recent advances in fatigue crack growth modelling. Int. J. Fract. 80, 165-192.
24. Ellyin, F. (1986) Crack growth rate under cyclic loading and effect of different singularity fields. Engng Fract. Mech. 25, 463-473.
25. Ellyin, F. (1997) Fatigue Damage, Crack Growth and Life Prediction, Chapman & Hall.
26. Weertman, J. (1973) Theory of fatigue crack growth based on a BCS theory with work hardening. Int. J. Fract. 9, 25-130.
27. Gillemot, L. F. (1976) Criterion of crack initiation and spreading. Engng Fract. Mech. 8, 239-253.
28. Gillemot, F. (1973) Effect of the material properties on fatigue crack growth at ambient and elevated temperature. In: Proceedings of the International Conference on Creep and Fatigue in Elevated Temperature Applications. Sheffield, Philadelphia, 236.1.
29. Rice, J. R. (1967) Mechanics of crack tip deformation and extension by fatigue. In: Fatigue Crack Propagation, ASTM STP 415. American Society for Testing and Materials, Philadelphia, PA, 247-311.
30. Antolovich, S. D., Saxena, A. and Chanani, G. R. (1975) A model for fatigue crack propagation. Engng Fract. Mech. 7, 649-652.
31. Li, D. M., Nam, W. J. and Lee, C. S. (1998) An improvement on prediction of fatigue crack growth from low cycle fatigue properties. Engng Fract. Mech. 60, 397-406.
32. Chakraborty, S. B. (1979) A model relating low cycle fatigue properties and microstructure to fatigue crack rates. Fatigue Fract. Engng Mater. Struct. 2, 331-344.
33. Heikkenen, H. C., Starke, E. A., Jr. and Chakraborty, S. B. (1982) Modification of the Chakraborty model for calculating fatigue crack growth rates (FCGR's). Scr. Metall. 16, 571-574.
34. Hutchinson, J. W. (1968) Singular behaviour at the end of a tensile crack in a hardening material. J. Mech. Phys. Solids 16, 13-31.
35. Nicoletto, G. (1989) Plastic zones about fatigue cracks in metals. Int. J. Fatigue, 3, 107-115
36. Engng Fract. Mech. 22, 351-357.
37. Mishra, S. C. and Parida, B. K. (1985) Determination of the size of crack tip plastic zone in a thin sheet under uniaxial loading. Engng Fract. Mech. 22, 351-357.
38. Banks, T. M. and Garlick, A. (1984) The form of crack tip plastic zone. Engng Fract. Mech. 19, 571-581.
39. Tekin, A. and Martin, J. W. (1989) High-resolution measurement of crack-tip plastic zone sizes by selected area-channelling patterns. Metallography 22, 1-14.
40. Bathias, C. (1996). Retrospective view on the role of the plastic zone at a fatigue crack tip. Fatigue Fract. Engng Mater. Struct. 19, 1301-1306.
41. Kujawaski, D. and Ellyin, F. (1986) On the size of plastic zone ahead of crack tip. Engng Fract. Mech. 5, 229-236.
42. th. Fatigue Fract. Engng Mater. Struct. 23, 805-812.
43. Liaw, P. K. (1988) Overview of crack closure at near-threshold fatigue crack growth levels. In: Mechanics of Fatigue Crack Closure, ASTM STP 982 (Edited by J. C. Newman Jr. & W. Elber), American Society for testing and Materials, Philadelphia, PA, 62-92.
44. Klesnil, M. and Lukáš, P. (1972) Effect of stress cycle asymmetry on fatigue crack growth. Mater. Sci. Engng 9, 231-240.
45. Ritchie, R. O. (1977) Near threshold fatigue in ultra-high strength steel. Trans. ASME, J. Engng Mater. Technol. 99, 195-204.
46. Borrego, L. P., Ferreira, J. M. and Costa, J. M. (2001) Fatigue crack growth and crack closure in an AlMgSi alloy. Fatigue Fract. Engng Mater. Struct. 24, 255-265.
47. Kardomateas, G. A. and Carlson, R. L. (1998) Predicting the effects of load ratio on the fatigue crack growth rate and fatigue threshold. Fatigue Fract. Engng Mater. Struct. 21, 411-423.
48. Kurihara, M., Katoh, A. and Kawahara, M. (1986) Analysis on fatigue crack growth rates under a wide range of stress ratios. Trans. ASME, J. Pressure Vessel Technol. 108, 209-213.
49. Kanazawa, T., Machida, S. and Itoga, K. (1975) On the effect of cyclic stress ratio on the fatigue crack propagation. Engng Fract. Mech. 7, 445-455.
50. Tsukuda, H., Ogiyama, H. and Shiraishi, T. (1995) Fatigue crack growth and closure at high stress ratios. Fatigue Fract. Engng Mater. Struct. 18, 503-514.
51. Smith, I. F. C. and Smith, R. A. (1983) Fatigue crack growth in a fillet joint, Engng Fract. Mech. 18, 861-869.
52. Hudak, S. J. and Davidson, D. L. (1988) The dependence of crack closure on fatigue loading variables. In: Mechanics of Fatigue Crack Closure, ASTM STP 982 (Edited by J. C. Newman Jr. & W. Elber), American Society for Testing and Materials, Philadelphia, PA, 121-138.
53. Zheng, X.-L. (1994) Mechanical model for fatigue crack propagation in metals. In: Handbook of Fatigue Crack Propagation in Metallic Structures (Edited by A. Carpinteri). Elsevier Science B.V., 363-395.
54. Bolotin, V. V. (1999) Analytical modelling of fatigue crack propagation. Fatigue Fract. Engng Mater. Struct. 22, 939-947.
55. ASM Handbook (1996) Fatigue and Fracture, Vol. 19. ASM International.
56. Borsom, J. M. (1971) Fatigue-crack propagation in steels of various yield strengths. Trans. ASME, J. Engng Indust. Nov., 1190-1196.
57. Stephens, R. I., Chung, J. H., Fatemi, A., Lee, H. W., Lee, S. G., Vaca-Oleas, C. and Wang, C. M. (1984) Constant and variable amplitude fatigue behaviour of five cast steel at room temperature and -45°C. Trans. ASME J. Engng Mater. Technol. 106, 25-37.
58. Nikishkov, G. P. (1995) An algorithm and a computer program for the three-term asymptotic expansion of elastic-plastic crack tip stress and displacement fields. Engng Fract. Mech. 50, 65-83.
59. Hutchinson, J. W. (1968) Singular behaviour at the end of a tensile crack in a hardening & material. J. Mech. Phys. Solids 16, 13-31.
60. Saxena, A. (1998) Nonlinear Fracture Mechanics for Engineers. CRC Press, Boca Raton, FL.
61. Wu, S.-X., Mai, Y.-W. and Cotterell, F. (1992) A model of fatigue crack growth based in dugdale model and damage accumulation. Int. J. Fract. 57, 253-267.
62. Paris, P. and Erdogan, F. (1963) A critical analysis of crack propagation laws. Trans. ASME, J. Basic Engng, Dec, 528-534.