Computational fluid dynamics modeling of impinging gas-jet systems: I. Assessment of eddy viscosity models

Journal of Fluids Engineering, Transactions of the ASME

Volumn 127, Issue 4, 2005, Pages 691-703

  Coussirat, M ^a   Van Beeck, J ^b   Mestres, M ^c   Egusguiza, E ^a   Buchlin, J M ^b   Escaler, X ^a  

^a UNIVERSITAT POLITÈCNICA DE CATALUNYA   (Spain)

^b VON KARMAN INSTITUTE FOR FLUID DYNAMICS   (Belgium)

^c UNIVERSITAT POLITÈCNICA DE VALÈNCIA   (Spain)

Author keywords

CFD; Eddy Viscosity; Heat Transfer; Impinging Jet; Numerical Modeling; RANS Turbulence Model; Velocity Field

Indexed keywords

HEAT TRANSFER; JETS; MATHEMATICAL MODELS; NUSSELT NUMBER; VELOCITY MEASUREMENT; VISCOELASTICITY;

EDDY VISCOSITY; IMPINGING JETS; NUMERICAL MODELING; RANS TURBULANCE MODEL; VELOCITY FIELD;

COMPUTATIONAL FLUID DYNAMICS;

EID: 24344448142     PISSN: 00982202     EISSN: None     Source Type: Journal    
DOI: 10.1115/1.1949634     Document Type: Conference Paper

References (43)

1. Jambunathan K., Lai E., Moss M., and Button B., 1992, "A Review of Heat Transfer Data for Single Circular Jet Impingement," Int. J. Heat Fluid Flow 13, pp. 106-115.
2. Núñez, M., Coussirat, 2003, "Theoretical/Numerical Study of Flows With Strong Streamline Curvature," Ph.D. Thesis, CDIF-Dpto. Mecánica Fluidos-ETSEIB Universidad Politécnica de Cataluña.
3. Baughn, J., and Shimizu, S., 1989, "Heat Transfer Measurements From a Surface With Uniform Heat Flux and an Impinging Jet," ASME J. Heat Transfer 82, pp. 1096-1098.
4. Baughn, J., Hechanova, A., and Yan, X., 1991 "An Experimental Study of Entrainment Effects on the Heat Transfer From a Flat Surface to Heated Circular Impinging Jet," ASME J. Heat Transfer 113, pp. 1023-1025.
5. Gardon, R., and Afkirat, C., 1965, "The Role of Turbulence in Determining the Heat-Transfer Characteristics of Impinging Jets," Int. J. Heat Mass Transfer 8(9), pp. 1261-1272.
6. Polat, S., Huang, B., Mujumdar, A., and Douglas, J., 1989, "Numerical Flow and Heat Transfer Under Impinging Jets: A Review," Annu. Rev. Numer. Fluid Mech. Heat Transfer 2, pp. 157-197.
7. Craft, T., Graham, L., and Launder, B., 1993, "Impinging Jet Studies for Turbulence Model Assessment: II. An Examination of the Performance of Four Turbulence Models," Int. J. Heat Mass Transfer 36(10), pp. 2685-2697.
8. Morris, G., Garimella, S., and Amano, R., 1996, "Prediction of jet impingement heat transfer using a hybrid wall treatment with different turbulent Prandtl number functions," J. Heat Transfer 118, pp. 562-569.
9. Roy, S., 2000, "Numerical Investigation of the Blade Cooling Effect Generated by Multiple Jets Issuing at an Angle Into a Incompressible Horizontal Crossflow," Numer. Heat Transfer, Part A 38, pp. 701-718.
10. Patel, P., and Roy, S., 2001 "Study of Jet impingement Heat Transfer for Varying Flow Characteristics," ASME Fluid Engineering Division Summer Meeting, pp. 1-7.
11. Behnia, P., Parneix, S., and Durbin, P., 1998, "Prediction of Heat Transfer in an Axisymmetric Turbulent Jet Impinging on the Flat Plate," Int. J. Heat Mass Transfer 41(12), pp. 1845-1855.
12. Behnia, P., Parneix, S., Shabany, Y., and Durbin, P., 1999, "Numerical Study of Turbulent Heat Transfer in Confined and Unconfined Impinging Jets," Int. J. Heat Fluid Flow 20, pp. 1-9.
13. Durbin, P., 1991, "Near-Wall Turbulence Closure Without Damping Functions," Theor. Comput. Fluid Dyn. 3, pp. 1-13.
14. Spalart, P., and Allmaras, S., 1992, "A One-Equation Turbulence Model for Aerodynamics Flow," AIAA Paper No. 92-0439, pp. 1-22.
15. Shin, Y., Ray, M., and Mujemdar, S., 2002, "Computational Study of Impingement Heat Transfer Under a Turbulent Slot Jet," Ind. Eng. Chem. Res. 41, pp. 4643-4651.
16. Spalart, P., 2000, "Strategies for Turbulence Modelling and Simulations," Int. J. Heat Fluid Flow 21, pp. 252-263.
17. Popiel, C., and Trass, O., 1991, "Visualization of a Free and Impinging Round Jet," Exp. Therm. Fluid Sci. 4, pp. 253-264.
18. Gauntner, J., Livingood, J., and Hrycak, P., 1970, "Survey of Literature on Flow Characteristic of a Single Turbulent Jet Impinging on a Flat Plate," N.A.S.A. Technical Note TN D-5652, pp. 1-41.
19. Hoffmann, G., 1996, "Engineering Applications of Large Eddy Simulation to Turbulent Free and Wall-Bounded Shear Layers," Ph.d. Thesis, Lehrstuhl für Fluidmechanik Technische Universität München.
20. Voke, P., and Gao, S., 1998, "Numerical Study of Heat Transfer From a Impinging Jet," Int. J. Heat Mass Transfer 141, pp. 671-680.
21. Cziesla, T., Biswas, G., Chattopadhyay, H., and Mitra, N., 2001, "Large-Eddy Simulation of Flow and Heat Transfer in an Impinging Slot Jet," Int. J. Heat Fluid Flow, 22, pp. 500-508.
22. Launder, B., and Spalding, D., 1974, "The Numerical Computation of Turbulent Flows," Comput. Methods Appl. Mech. Eng. 3, pp. 269-289
23. Choudhury, D., Kim, S., and Flannery, W., 1993, "Calculation of Turbulent Separated Flows Using a Renormalization Group Based k-ε Turbulence Model," ASME Fluids Engineering Conf., ASME Paper No. TN-044
24. Shin, T., Liu, W., Shabir, A., Yang, Z., and Zhu, J., 1995, "A New k-ε Eddy Viscosity Model for High Reynolds Number Turbulence Flows," Comput. Fluids 24(3), pp. 227-238.
25. Wilcox, C., 1988, "Reassessment of the Scale Determining Equation for Advanced Turbulence Models," AIAA J. 26(11), pp. 1299-1310.
26. Wilcox, C., 1988, "Multiscale Model for Turbulent Flows," AIAA J. 26(11), pp. 1311-1320.
27. Durbin, P., and Petterson, R., 2001, Statistical Theory and Modeling for Turbulent Flows, 1st Edition, Wiley, New York.
28. Tennekes, H., and Lumley, J., 1983, A First Course in Turbulence, 9th Edition, Massachusetts Institute of Technology, Cambridge, MA.
29. Durbin, P., 1993 "A Reynolds-Stress Model for Near Wall Turbulence," J. Fluid Mech. 249, pp. 465-498.
30. Durbin, P., 1993, "Application of a Near-Wall Turbulence Model to Boundary Layers and Heat Transfer," Int. J. Heat Fluid Flow 14(4), pp. 316-323.
31. 2 Model," AIAA J. 13, pp. 659-664.
32. Wolfshtein, M., 1969, "The Velocity and Temperature Distribution in One-Dimensional Flow With Turbulence Augmentation and Pressure Gradient," Int. J. Heat Mass Transfer, 12, pp. 301-308.
33. Gardon, R., and Afkirat, C., 1966, "Heat Transfer Characteristic of Impinging Two-Dimensional Air Jets," ASME J. Heat Transfer 88, pp. 101-108.
34. Martin, H., 1977, "Heat and Mass Transfer Between Impinging Gas Jets and Solid Surfaces," Adv. Heat Transfer 13, pp. 1-60.
35. Cooper, D., Jackson, B., and Liao, G., 1993, "Impinging Jet Studies for Turbulence Model Assessment: I. Flow-Field Experiments," Int. J. Heat Mass Transfer 36(10), pp. 2675-2684.
36. Hirsch, Ch., 1988, Numerical Computation of Internal and External Flows, Vol. 1 and 2, 1st Edition, Wiley, New York.
37. Ferziger, J., and Perić, M., 1997, Computational Methods for Fluid Dynamics, 2nd Edition, Springer, New York.
38. Turbulence European Research Community on Flow and ERCOFTAC Combustion, 1998. ERCOFTAC, on-line web database edition.
39. Coussirat, M. G., 2001, "Numerical Study of Turbulence Models for Impinging Gas-Jet Systems," von Kármán Institute for Fluid Dynamics, EA Report No. VKI-PR 2001-05.
40. Kays, W., 1994 "Turbulent Prandtl Number - Where Are We?" J. Heat Transfer 116, pp. 284-295.
41. Daly, B., and Harlow, F., 1970, "Transport Equations in Turbulence," Phys. Fluids 13, pp. 2634-2649.
42. Jaw, S., and Chen, J., 1998, "Present Status of Second Order Closure Turbulence Models: I. Overview," J. Eng. Mech., pp. 484-501.
43. Coussirat M., van Beeck J., Mestres M., Equsguiza E., Buchlin J.-M., and Valeroe, C., 2005, J. Fluids Eng. (to be published).