Seismic design of friction-damped braced frames based on historical records

Earthquake Spectra

Volumn 21, Issue 3, 2005, Pages 761-778

  Levy, Robert ^a   Lavan, Oren ^a   Rutenberg, Avigdor ^a  

^a TECHNION ISRAEL INSTITUTE OF TECHNOLOGY   (Israel)

Author keywords

[No Author keywords available]

Indexed keywords

BUILDINGS; DAMPING; DEGREES OF FREEDOM (MECHANICS); EARTHQUAKE RESISTANCE; EARTHQUAKES; FRICTION; STIFFNESS; STRUCTURAL DESIGN; STRUCTURAL FRAMES;

FRICTION DAMPED BRACED FRAMES; SEISMIC DESIGN;

SEISMOLOGY;

DAMPING; DYNAMIC ANALYSIS; FRICTION; HISTORICAL RECORD; SEISMIC DESIGN; SEISMIC RETROFIT; STEEL STRUCTURE; STRUCTURAL ANALYSIS; STRUCTURAL COMPONENT;

EID: 24144463993     PISSN: 87552930     EISSN: None     Source Type: Journal    
DOI: 10.1193/1.1950674     Document Type: Article

References (29)

1. Aiken, I. D., and Kelly, J. M., 1990. Earthquake Simulator Testing and Analytical Studies of Two Energy - Absorbing Systems for Multistory Structures, Report No. UCB/EERC-90/03, University of California, Berkeley, CA.
2. American Society of Civil Engineers (ASCE), 2000. Prestandard and Commentary for the Seismic Rehabilitation of Buildings, prepared for the SAC Joint Venture, published by the Federal Emergency Management Agency, FEMA-356, Washington D. C.
3. Associate Committee on National Building Code, 1995. National Building Code of Canada 1995, National Research Council, Ottawa.
4. Carr, A. J., 2000. RUAUMOKO - Inelastic Dynamic Analysis (Users Manual), Department of Civil Engineering, University of Canterbury.
5. Chopra, A. K., Goel, R. K., and Chintanapakdee, C., 2001. Statistics of SDF-System Estimate of Roof Displacement for Pushover Analysis of Buildings, PEER Report 2001/16, Pacific Earthquake Engineering Research Center, University of California, Berkeley.
6. Constantinou, M. C., Reinhorn, A. M., Mokha, A., and Watson, R., 1991. Displacement control device for base-isolated bridges, Earthquake Spectra 7 (2), 179-200.
7. Constantinou, M. C., Soong, T. T., and Dargush, G. F., 1998, Passive Energy Dissipating Systems for Structural Design and Retrofit, MCEER, University of New York at Buffalo, Buffalo, NY.
8. Filiatrault, A., and Cherry, S., 1987. Comparative performance of friction damped systems and base isolation systems for earthquake retrofit and seismic design, Earthquake Eng. Struct. Dyn. 16, 389-416.
9. Filiatrault, A., and Cherry, S., 1989. Efficient numerical modelling for the design of friction damped braced steel plane frames, Can. J. Civ. Eng. 16, 211-218.
10. Filiatrault, A., and Cherry, S., 1990. Seismic design for friction-damped structures, J. Struct. Eng. 116 (5), 1334-1355.
11. FitzGerald, T. F., Anagnos, T., Goodson, M., and Zsutty, T., 1989. Slotted bolted connections in aseismic design for concentrically braced connections, Earthquake Spectra 5 (2), 383-391.
12. Fu, Y., and Cherry, S., 2000. Design of friction damped structures using lateral force procedure, Earthquake Eng. Struct. Dyn. 29 (7), 989-1010.
13. Gluck, N., Reinhorn, A. M., Gluck, J., and Levy, R., 1996. Design of supplemental dampers for control of structures, J. Struct. Eng. 122 (12), 1394-1399.
14. Hanson, R. D., and Soong, T. T., 2001. Seismic Design with Supplemental Energy Dissipation Devices, monograph, Earthquake Engineering Research Institute, Oakland, CA.
15. Heidebrecht, A. C., and Lu, C. Y., 1988. Evaluation of the seismic response factor introduced in the 1985 edition of the National Building Code of Canada, Can. J. Civ. Eng. 15, 382-388.
16. Kitajima, K., Ageta, N., Nakanishi, M., and Adachi, N., 1997. Pseudo-dynamic test on reinforced concrete frame retrofitted with damper, Trans. Jpn. Concr. Inst. 19, 203-210.
17. Krawinkler, H., and Seneviratna, G. D. P. K., 1998. Pros and cons of a pushover analysis of seismic performance evaluation, Eng. Struct. 20 (4-6), 452-464.
18. Levy, R., Marianchik, E., Rutenberg, A., and Segal, F., 2001. A simple approach to the seismic design of friction damped medium-rise frames, Eng. Struct. 23 (3), 250-259.
19. Naumoski, N., Heidebrecht, A. C., and Rutenberg, A., 1993. Representative Ensembles of Strong Motion Earthquake Records, EERG Report 93-1, Earthquake Engineering Research Group, McMaster University, Hamilton, Ontario.
20. Nims, D. K., Richter, P. J., and Bachman, R. E., 1993. The use of the energy dissipating restraint for seismic hazard mitigation, Earthquake Spectra 3 (9), 467-489.
21. Ohnishi, H., Kitajima, K., Nakanishi, M., and Adachi, N., 1999. A study on friction dampers for response-control retrofit of existing R/C buildings, Trans. Jpn. Concr. Inst. 21, 439-446.
22. Pall, A. S., and Marsh, C., 1982. Response of friction damped braced frames, J. Struct. Div. ASCE 108, 1313-1323.
23. Pall, A. S., and Pall, R., 1996. Friction dampers for seismic control of buildings - A Canadian experience, Proceedings of 11th World Conference on Earthquake Engineering, Acapulco, Mexico, June 23-28, Elsevier Science Ltd., Paper No. 497.
24. Popov, E. P., Yang, T. S., and Grigorian, C. E., 1993. New directions in structural seismic designs, Earthquake Spectra 9 (4), 845-875.
25. Rao, R. S., Gergely, P., and White, R. N., 1996. A simplified design method for retrofit of gravity load design RC frames with friction dampers, Proceedings of 11th World Conference on Earthquake Engineering, Acapulco, Mexico, June 23-28, Elsevier Science Ltd., Paper No. 1691.
26. Singh, M. P., and Moreschi, L. M., 2001. Optimal seismic design of building structures with friction dampers, Proceedings of Earthquake Engineering Frontiers in the New Millennium: Proceedings of the China-U. S. Millennium Symposium on Earthquake Engineering, Beijing, 8-11 November 2000, A. A. Balkema, Lisse, The Netherlands, pp. 345-350.
27. Tremblay, R., and Stiemer, S. F., 1993. Proceedings of Seminar on Seismic Isolation, Passive Energy Dissipation and Active Control, Applied Technology Council, ATC 17-1, Vol. 2, San Francisco, CA.
28. Vulcano, A., 1995. Design of damped steel bracing systems for seismic control of framed structures, Proceedings of 10th European Conference on Earthquake Engineering, Vienna, Vol. 3, pp. 1567-1572.
29. Way, D., and Taylor, B., 1996. Seismic retrofit of the TransWorld Bank building using friction dampers for energy dissipation, Proceedings of Passive Energy Dissipation Systems for New and Existing Buildings Symp., Alhambra, Calif.