Wear behavior of environmentally acceptable alternatives to chromium coatings: Cobalt-based and other coatings

Metal Finishing

Volumn 102, Issue 10, 2004, Pages 42-54

  Brooman, Eric W ^a  

^a M and P Professional Services   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

AMORPHOUS MATERIALS; COBALT; CORROSION RESISTANCE; ELECTRODEPOSITION; ELECTROPLATING; ENVIRONMENTAL PROTECTION; HEAT FLUX; HEAT TREATMENT; PHYSICAL VAPOR DEPOSITION; PLASMA SPRAYING; SURFACE TREATMENT; THERMAL DIFFUSION; WEAR RESISTANCE;

COATING PROPERTIES; ELECTROPLATED HARD CHROMIUM (EHC); HEAT-SENSITIVE SUBSTRATES; THERMAL SPRAYING;

CHROMATE COATINGS;

EID: 23844484326     PISSN: 00260576     EISSN: None     Source Type: Journal    
DOI: 10.1016/S0026-0576(04)84659-2     Document Type: Note

References (36)

1. Brooman, E.W., "Corrosion Behavior of Environmentally Acceptable Alternatives to Cadmium and Chromium Coatings: Cadmium, Part I," Metal Finishing, 98(4):42-50; 2000
2. Brooman, E.W., "Corrosion Behavior of Environmentally Acceptable Alternatives to Cadmium and Chromium Coatings: Cadmium, Part II," Metal Finishing, 98(6): 106-115; 2000
3. Brooman, E. W., "Corrosion Behavior of Environmentally Acceptable Alternatives to Cadmium and Chromium Coatings: Chromium, Part I," Metal Finishing, 98(7): 38-43; 2000
4. Brooman, E.W., "Corrosion Behavior of Environmentally Acceptable Alternatives to Cadmium and Chromium Coatings: Chromium, Part II," Metal Finishing, 98(8):39-45; 2000
5. Brooman, E.W., "Corrosion Behavior of Environmentally Acceptable Alternatives to Nickel Coatings," Metal Finishing, 99(8):100-107; 2001
6. Brooman, E.W., "Wear Behavior of Environmentally Acceptable Alternatives to Chromium Coatings: Part I - Nickel-based Coatings," Metal Finishing, 102(9): 75-82; 2004
7. Brooman, E.W., "Overview of Technologies to Eliminate Heavy Metals Used in Wear Resistant Coatings," presentation at the Partners in Environmental Technology Symposium, Session 1C, Washington, DC; (2003
8. Anon., "Tribomet T104C and T104CS Wear Control Coatings," product literature, Praxair Surface Technologies Inc., Indianapolis
9. Legg, K., "Adoption of Thermal Spray Coatings as Hard Chrome Alternatives by the North American Aerospace Industry and Other Industry Sectors," presentation at the 3rd Int. Conf. on Hard and Decorative Chromium for the 21st Century, Saint-Etienne, France; 2001
10. Brooman, E.W., et al., "Evaluation of Nano-composite Coatings as Environmentally Acceptable Alternatives to Hard Chromium Plating," presentation at AESF/EPA Conf. on Environmental & Process Excellence," Session 5, Orlando, FL; 2004
11. Brockman, D. and M. Wyrostek, "Chromium Alternative Solves Problem," Products Finishing, 66(3):52-55; 2001
12. Palumbo, G., et al., "Nanotechnology Opportunities for Electroplating Industries," Proc. SUR/FIN '03, Milwaukee, WI, Session N, 528-542; The AESF Society; 2003
13. Jeong, D.H., et al., "Wear Properties of Nanocrystalline Electrodeposits," Proc. SUR/FIN '03, Milwaukee, WI, Session Q, 697-700;AESF; 2003
14. McCrea, J., "Electroformed Nanocrystalline Coatings: An Advanced Alternative to Hard Chrome Electroplating," presentation at the Partners in Environmental Technology Symposium, Session 1C, Washington, DC; 2003
15. Legg, K., "Replacing Chrome on Internal Diameters," presentation at the Gorham Conf. on Advanced Coating Systems for Gas Turbine Engines and Aircraft, New Orleans, LA; 1999
16. Audino, M., "Eliminating Chromium from Large Caliber Gun Barrels," presentation at the Partners in Environmental Technology Symposium, Washington, DC; 2003
17. Anon., "Laser Induced Surface Improvement," University of Texas Space Institute Website http://www.utsi.edu/research/LISI
18. Anon., "Laser Cladding," Praxair Surface Technologies Website at http://www.praxairsur-facetechnologies.com/PST_Laser_Processing/laser-cladding. html
19. Zaki, N., "Tin-cobalt as a Substitute for Hexavalent Chrome Plating for Decorative Purposes," presentation at the 3rd Int. Conf. on Hard and Decorative Chromium for the 21st Century, Saint-Etienne, France; 2001
20. Hovestad, A.J., et al., "Electroplating of Amorphous Iron-group Metal-tungsten Alloys as Alternative to Chromium Plating," presentation at the 3rd Int. Conf. on Hard and Decorative Chromium for the 21st Century, Saint-Etienne, France; 2001
21. Rosenthal, S., et al., "Evaluation of Brush Plating Alternatives to Hard Chrome Tank Plating Test Results," Proc. 5th Annual Air Force Worldwide Pollution Prevention Conf.; 1996
22. Siegmann, St., et al., "Tribological Requirements of Thermally Sprayed Coatings for Wear Resistant Applications" presentation at the 1st Int. Thermal Spray Conf., Montreal, Canada; 2000
23. Klingenberg, M.L., et al., "Nano-particle Composite Plating as an Alternative to Hard Chromium and Nickel Coatings," presentation at SUR/FIN '03, Session N, Milwaukee, WI; 2003
24. Moos, R., et al., "The ALTIM TD Process Enables New Applications for Aluminum," Surface Finishing News Website, www.surfacefinishing.com; May 30, 2001
25. Plumb, S.A., et al., "Nitrotec S, an Environmentally Friendly Alternative to Hard Chromium Plating," Trans. Inst. Metal Finishing; January 1999; reported at http://ttigroup.co.uk/tec_nitrotecs.htm.
26. Kulu, P. and T. Pihl, "Selection Criteria for Wear Resistant Powder Coatings Under Extreme Erosive Wear Conditions," J. Thermal Spray Tech., 11(4): 517-522; 2002
27. Legg, K., "Thermal Spray Coatings for Internal Diameters," presentation at AeroMat 2002 Conf.; 2002
28. McDonough, R.W., Volckening Inc., Brooklyn, NY, personal communication (2003); product literature, Ionic Fusion Corp., Longmont, CO
29. Anon., Magnagold™ product literature, General Magnaplate Corp., Linden, NJ, USA; 2001
30. Braza, J.F., "Sliding Wear Evaluation of Various Coating Processes on AISI 52100 and M50 Steels," Technical Report No. AD-D148283; January 1, 1992
31. Noll, K.E., "Effects of Ion Implantation on Electroplated Chromium," Technical Report No. AD-D451305; April, 1995
32. Sarkisyan, F., "Wear Resistance of Vapor-deposited Coatings," Technical Report No. AD-695890; January 1, 1969).
33. Bolduc, M., et al., "Selective Modification of the Tribological Properties of Aluminum Through Temperature and Dose Control in Oxygen Plasma Source Ion Implantation," J. Mater. Res., 18 (12):2779-2792; 2003
34. Mischler, S., "Recent Advances in Tribology: the Point of View of a Materials Engineer," Swiss Tribology Online, Event 9; 1996
35. Gutkin, M. et al., "Theoretical Models of Plastic Deformation Processes in Nanocrystalline Materials," Rev. Adv. Mater. Sci., 2:80-102; 2001
36. Anon., TriCom product literature, U.S. Chrome Corp., Stratford, CT; 2004