Microtomography assessment of failure in acrylic bone cement

Biomaterials

Volumn 26, Issue 33, 2005, Pages 6460-6466

  Sinnett Jones, P E ^a   Browne, M ^a   Ludwig, W ^b   Buffiere J Y ^c   Sinclair, I ^a  

^a UNIVERSITY OF SOUTHAMPTON   (United Kingdom)

^b CNRS   (France)

^c UNIVERSITÉ DE LYON   (France)

Author keywords

Bone cement; Micromechanical failure; PMMA; X Ray synchrotron tomography

Indexed keywords

ACRYLICS; CRACK INITIATION; EDGE DETECTION; FATIGUE OF MATERIALS; FRACTURE TOUGHNESS; IMAGING TECHNIQUES; MICROSTRUCTURE; STRESS ANALYSIS; TOMOGRAPHY; X RAYS;

CRACK TIP SHIELDING; FATIGUE DAMAGE PROCESSES; MICROTOMOGRAPHY ASSESSMENT; SURFACE EXAMINATION;

BONE CEMENT;

ACRYLIC CEMENT;

ARTICLE; CONCENTRATION (PARAMETERS); FATIGUE; IN VITRO STUDY; INCIDENCE; PRIORITY JOURNAL; STRESS;

BIOCOMPATIBLE MATERIALS; BIOMECHANICS; BONE CEMENTS; MATERIALS TESTING; METHYLMETHACRYLATES; MICROSCOPY, ELECTRON, SCANNING; MICROSCOPY, PHASE-CONTRAST; POLYMETHYL METHACRYLATE; PROSTHESIS FAILURE; SIGNAL TRANSDUCTION; STRESS, MECHANICAL; SURFACE PROPERTIES; SYNCHROTRONS; TENSILE STRENGTH; TOMOGRAPHY, X-RAY COMPUTED; X-RAYS;

EID: 22544441340     PISSN: 01429612     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.biomaterials.2005.04.064     Document Type: Article

References (36)

1. H. Malchau, P. Herberts, T. Eisler, G. Garellick, and P. Soderman The Swedish total hip replacement register J Bone Jt Surg 84A 2002 2 20
2. B.D. Shannon, J.F. Klassen, J.A. Rand, D.J. Berry, and R.T. Trousdale Revision total knee arthroplasty with cemented components and uncemented intramedullary stems J Arthroplasty 18 7 2003 27 32
3. J.D. Keener, J.J. Callaghan, D.D. Goetz, D.R. Pederson, P.M. Sullivan, and R.C. Johnston Twenty-five-year results after Charnley total hip arthroplasty in patients less than fifty years old - a concise follow-up of a previous report J Bone Jt Surg 85A 6 2003 1066 1072
4. Havelin LI, Furnes O, Espehaug B. The Norwegian Arthroplasty Register, The Annual Report, 2003. Department of Orthopaedic Surgery, Haukeland University Hospital http://www.haukeland.no/nrl/.
5. M. Jasty, W.J. Maloney, C.R. Bragdon, D.O. O'Connor, T. Haire, and W.H. Harris The initiation of failure in cemented femoral components of hip arthroplasties J Bone Jt Surg 73B 4 1991 551 558
6. McCormack BAO, Prendergast PJ. Interface failure in implants cemented with different bone-cements - a fracture mechanics approach. In: Transactions of the second international symposium on computer methods in biomechanics and biomedical engineering, 1996, p. 35-45.
7. A. Race, M.A. Miller, D.C. Ayers, and K.A. Mann Early cement damage around a femoral stem is concentrated at the cement/bone interface J Biomech 36 4 2003 489 496
8. P.J. Prendergast The functional performance of orthopaedic bone cement Key Eng Mater 198-199 2001 291 300
9. B.P. Murphy, and P.J. Prendergast The relationship between stress, porosity, and nonlinear damage accumulation in acrylic bone cement J Biomed Mater Res 59 4 2002 646 654
10. N.E. Bishop, S. Ferguson, and S. Tepic Porosity reduction in bone cement at the cement-stem interface J Bone Jt Surg 78B 3 1996 349 356
11. J.F. Orr, N.J. Dunne, and J.C. Quinn Shrinkage stresses in bone cement Biomaterials 24 17 2003 2933 2940
12. G. Lewis Fatigue testing and performance of acrylic bone-cement materials: state-of-the-art review J Biomed Mater Res (Appl Biomat) 66B 1 2003 457 486
13. L.D.T. Topoleski, P. Ducheyne, and J.M. Cuckler A fractographic analysis of in vivo poly(methyl methacrylate) bone-cement failure mechanisms J Biomed Mater Res 24 2 1990 135 154
14. L.D.T. Topoleski, P. Ducheyne, and J.M. Cuckler Microstructural pathway of fracture in poly(methyl methacrylate) bone-cement Biomaterials 14 15 1993 1165 1172
15. G. Lewis Properties of acrylic bone cement: state of the art review J Biomed Mater Res 38 2 1997 155 182
16. N.J. Dunne, and J.F. Orr Influence of mixing techniques on the physical properties of acrylic bone cement Biomaterials 22 13 2001 1819 1826
17. R.W. Klein, C.P. Scott, and P.A. Higham The strength of acrylic bone cement cured under thumb pressure Biomaterials 25 5 2004 943 947
18. B.P. Murphy, and P.J. Prendergast On the magnitude and variability of the fatigue strength of acrylic bone cement Int J Fatigue 22 10 2000 855 864
19. A. Roques, M. Browne, J. Thompson, C. Rowland, and A. Taylor Investigation of fatigue crack growth in acrylic bone cement using the acoustic emission technique Biomaterials 25 5 2004 769 778
20. A. Roques, M. Browne, A. Taylor, A. New, and D. Baker Quantitative measurement of the stresses induced during polymerisation of bone cement Biomaterials 25 18 2004 4415 4424
21. E. Maire, J.-Y. Buffière, L. Salvo, J.J. Blandin, W. Ludwig, and J.M. Létang On the application of X-ray microtomography in the field of materials science Adv Eng Mater 3 8 2001 539 546
22. W. Ludwig, J.-Y. Buffière, S. Savelli, and P. Cloetens Study of the interaction of a short fatigue crack with grain boundaries in a cast Al alloy using X-ray microtomography Acta Mater 51 3 2003 585 598
23. P. Cloetens, M. Pateyron-Salomé, Y. Buffière J-, G. Peix, J. Baruchel, F. Peyrin, and M. Schlenker Observation of microstructure and damage in materials by phase sensitive radiography and tomography J Appl Phys 81 9 1997 5878 5886
24. A. Guvenilir, T.M. Breunig, J.H. Kinney, and S.R. Stock Direct observation of crack opening as a function of applied load in the interior of a notched tensile sample of Al - Li 2090 Acta Mater 45 5 1997 1977 1987
25. T.J. Marrow, J.-Y. Buffière, P.J. Withers, G. Johnson, and D. Engelberg High resolution X-ray tomography of short fatigue crack nucleation in austempered ductile cast iron Int J Fatigue 26 7 2004 717 725
26. M. Kocsis, and A. Snigirev Imaging using synchrotron radiation Nucl Instrum Meth 525A 1-2 2004 79 84
27. P. Cloetens, E. Boller, W. Ludwig, J. Baruchel, and M. Schlenker Absorption and phase imaging with synchrotron radiation Europhys News 32 2 2001
28. Ludwig W. Development and Applications of Synchrotron Radiation Microtomography. Dissertation der Fakultät für Physik der Ludwigs-Maximilians-Universität München, January 2001.
29. A.C. Henry, R.L. McCarley, S. Das, C.K. Malek, and D.S. Poche Structural changes in PMMA under hard X-ray irradiation Microsyst Technol 4 3 1998 104 109
30. O. Wollersheim, H. Zumaqué, J. Hormes, D. Kadereit, J. Langen, L. Häußling, P. Hoessel, and G. Hoffmann Quantitative studies of the radiation chemical behaviour of PMMA and poly(lactides) Nucl Instrum Meth 97B 1-4 1995 273 278
31. O. Wollersheim, and J. Hormes Quantitative in situ FTIR studies of polymers irradiated with synchrotron radiation Chem Phys 204 1 1996 129 134
32. O. Wollersheim, J. Hormes, F.-J. Hünerbein, G. Fußhöller, and J. Bargon In situ ESR investigations of synchrotron radiation-induced degradations of polymers Radiat Phys Chem 55 1 1999 103 106
33. H. Toda, I. Sinclair, Y. Buffière J-, E. Maire, K.H. Khor, and T. Gregson P Kobayashi A 3D measurement procedure for internal local crack driving forces via synchrotron X-ray microtomography Acta Mater 52 2004 1305 1317
34. M. Browne, A. Roques, and A. Taylor The acoustic emission technique in orthopaedics - a review J Strain AnalEng Des 40 1 2005 59 79
35. J. Kruzic, R.K. Nalla, J.H. Kinney, and R.O. Ritchie Crack blunting, crack bridging and resistance-curve fracture mechanics in dentin: effect of hydration Biomater 24 28 2003 5209 5221
36. J.K. Shang, and R.O. Ritchie Crack bridging by uncracked ligaments during fatigue-crack growth in sic-reinforced aluminum-alloy composites Metall Trans 20A 1989 897 908