Future accelerator magnet needs

IEEE Transactions on Applied Superconductivity

Volumn 15, Issue 2 PART II, 2005, Pages 1192-1199

  Devred, Arnaud ^a,b   Gourlay, Stephen A ^c   Yamamoto, Akira ^d  

^a CEA SACLAY   (France)

^b CERN   (Switzerland)

^c LAWRENCE BERKELEY NATIONAL LABORATORY   (United States)

^d HIGH ENERGY ACCELERATOR RESEARCH ORGANIZATION KEK   (Japan)

Author keywords

Accelerator; Superconducting magnets

Indexed keywords

COST EFFECTIVENESS; CURRENT DENSITY; MAGNETIC FIELD EFFECTS; MAGNETIC MOMENTS; RESEARCH AND DEVELOPMENT MANAGEMENT; SUPERCONDUCTING MAGNETS;

ACCELERATOR; COIL CONFIGURATION; CRITICAL CURRENT; CROSS SECTIONS;

ACCELERATOR MAGNETS;

EID: 22044448932     PISSN: 10518223     EISSN: None     Source Type: Journal    
DOI: 10.1109/TASC.2005.849530     Document Type: Conference Paper

References (77)

1. W. B. Sampson, "Superconducting magnets for beam handling and accelerators," in Proc. 2nd Int. Conf. Magn. Techn., H. Hadley, Ed., 1967, pp. 574-578.
2. "A report on the design of the Fermi National Accelerator Laboratory superconducting accelerator," May, 1979.
3. G. de Rijk, "Status report on the LHC main magnet production," to appear in these proceedings.
4. R. M. Scanlan et al., "Superconducting materials for large scale applications," Proc. IEEE, vol. 92, no. 10, pp. 1639-1654, Oct. 2004.
5. A. Devred, "Practical low temperature superconductors for electromagnets," CERN, Geneva, Switzerland, CERN Yellow Report 2004-006, July 12, 2004.
6. G. L. Dorofejev et al., "Artificial pinning centers," in Proc. 9th Int. Conf. Magn. Techn., C. Marinucci and P. Weymuth, Eds., ETH, Zurich, 1985, pp. 564-566.
7. L. D. Cooley and L. R. Motowidlo, "Advances in high field superconducting composites by addition of artificial pinning centers to niobium-titanium," Supercond. Sci. Technol., vol. 12, pp. R135-R151, 1999.
8. L. R. Motowidlo et al., "The pinning strength and upper critical fields of magnetic and nonmagnetic artificial pinning centers in Nb47wt%Ti wires," IEEE Trans. Appl. Supercond., vol. 13, pp. 3351-3354, 2003.
9. O. V. Chernyi et al., "The microstructure and critical current density of Nb-48 Wt.%Ti superconductor with very high alpha-Ti precipitate volume and very high critical current," Adv. Cryo. Eng., vol. 48(B), pp. 883-890, 2002.
10. V. V. Kashikhin and A. V. Zlobin, "Correction of the persistent current effect in Nb3Sn dipole magnets," IEEE Trans. Appl. Supercond., vol. 11, no. 1, pp. 2058-2061, 2001.
11. K. Okuno et al., "Test of the NbAl insert and ITER central solenoid model coil," IEEE Trans. Appl. Supercond., vol. 13, pp. 1437-1440, 2003.
12. T. Takeuchi, "Nb3Al conductors for high-field applications," Supercond. Sci. Technol., vol. 13, pp. R101-R119, 2000.
13. N. Banno et al., "Multifilamentary Nb/Al-Ge and Nb/Al-Si precursor fabrication using the intermediately rapid heating and quenching technique," Supercond. Sci. Technol., vol. 17, pp. 320-326, 2004.
14. 3 Al development in Japan," in Proc. Workshop on Accelerator Magnet Superconductor (WAMS), Archamps, France, Mar. 22-24, 2004.
15. 3Al superconducting wire for accelerator magnets," IEEE Trans. Appl. Supercond., vol. 14, no. 2, pp. 1016-1019, 2004.
16. A. Yamamoto, "Advances in superconducting magnets for particle physics," IEEE Trans. Appl. Supercond., vol. 14, no. 2, pp. 477-484, 2004.
17. T. Hasegawa et al., "HTS conductors for magnets," IEEE Trans. Appl. Supercond., vol. 12, no. 1, pp. 1136-1140, 2002.
18. J. Nagamatsu et al., "Superconductivity at 39 K in magnesium diboride," Nature, vol. 410, pp. 63-64, 2001.
19. 2 produced by selective tuning of impurity scattering," Supercond. Sci. Technol., vol. 17, no. 2, pp. 278-286, Suppl. S 2004.
20. 2 thin films," Phys Rev. B, vol. 68, pp. 224501-224508, 2003.
21. 2 tapes and wires," Physica C, vol. 385, pp. 286-305, 2003.
22. 3Sn conductors for the next generation hadron colliders," Adv. Cryo. Eng., vol. 48B, pp. 933-940, 2002.
23. A. Devred et al., "High field accelerator magnet R&D in Europe," IEEE Trans. Appl. Supercond., vol. 14, no. 2, pp. 339-344, 2004.
24. _, "Status of the Next European Dipole (NED) activity of the Collaborated Accelerator Research in Europe (CARE) project," to appear in these proceedings.
25. 3Sn conductor with distributed tin configuration," Adv. Cryo. Eng., vol. 50B, pp. 410-416, 2004.
26. O. Burning et al., "LHC luminosity and energy upgrade: A feasibility study," CERN, Geneva, Switzerland, CERN LHC Project Report 626, Dec. 2002.
27. F. Ruggiero et al., "LHC accelerator R&D and upgrade scenarios," CERN, Geneva, Switzerland, LHC Project Report 666, 2003.
28. _, "Performance limits and IR design of a possible LHC luminosity upgrade based on NbTi SC magnet technology," in Proc. 2004 Eur. Part. Accel. Conf., 2004, pp. 608-610.
29. J. Strait et al., "Toward a new LHC interaction design for a luminosity upgrade," in Proc. 2003 Part. Accel. Conf., 2003, pp. 146-150.
30. R. Kephart et al., The U.S. LHC Accelerator Research Program: A Proposal. [Online] http://www-td.fnal.gov/LHC/USLARP.html
31. 3Sn quadrupole magnets for the LHC IR," IEEE Trans. Appl. Supercond., vol. 13, no. 2, pp. 1262-1265, 2003.
32. A. V. Zlobin et al., "Conceptual design study of Nb3Sn low-beta quadrupoles for 2nd generation LHC IRs," IEEE Trans. Appl. Supercond., vol. 13, no. 2, pp. 1266-1269, 2003.
33. R. Gupta et al., "Open mid-plane dipole design for LHC IR upgrade," IEEE Trans. Appl Supercond., vol. 14, no. 2, pp. 259-262, 2004.
34. M. Durante et al., "Development and manufacturing of a Nb3Sn quadrupole magnet model at CEA/Saclay for the Tesla interaction region," IEEE Trans. Appl. Supercond., vol. 14, no. 2, pp. 357-360, 2004.
35. B. Parker, private communication, 2002.
36. 3Sn technology for accelerator magnets," to appear in these proceedings.
37. A. D. Kovalenko, "Status of the nuclotron," in Proc. 1994 European Particle Accelerator Conf., 1994, pp. 161-164.
38. W. Henning, "FAIR-an international accelerator facility for research with ions and antiprotons," in Proc. 2004 European Particle Accelerator Conf., 2004, pp. 50-53.
39. E. Fischer et al., "Minimization of AC power losses in fast-cycling window frame 2 T superferric magnets with the yoke at 4.5 K," to appear in these proceedings.
40. A. Kovalenko et al., "Design and study of a superferric model dipole and quadrupole magnets for the GSI fast-pulsed synchrotron SIS 100," in Proc. 2004 Eur. Part. Accel. Conf., 2004, pp. 1735-1737.
41. L. Bottura et al., "A cable-in-conduit superconductor for pulsed accelerator magnets," to appear in these proceedings.
42. P. Wanderer et al., "Initial test of a fast-ramped superconducting model dipole for GSI's proposed SIS 200 accelerator," in Proc. 2003 Particle Accelerator Conf., 2003, pp. 2162-2164.
43. M. N. Wilson et al., "Measured and calculated losses in model dipole for GSI's heavy ion synchrotron," IEEE Trans. Appl. Supercond., vol. 14, no. 2, pp. 306-309, 2004.
44. A.I. Ageev et al., "The development and study of superconducting magnets for the UNK," IEEE Trans. Magn., vol. 28, no. 1, pp. 682-685, 1992.
45. J. Kaugerts et al., "Design of a 6 T, 1 T/s fast-ramping synchrotron magnet for GSI's planned SIS 300 accelerator," to appear in these proceedings.
46. A. Ageev et al., "Development of superconducting dipole design for creation of fast-cycling magnetic fields," IEEE Trans. Appl. Supercond., vol. 14, no. 2, pp. 295-299, 2004.
47. G. Moritz, "Fast-pulsed SC magnets," in Proc. 2004 European Particle Accelerator Conf., 2004, pp. 132-136.
48. W. Scandale, private communication, 2004.
49. http://neutrino.kek.jp/jhfnu/ [Online]
50. M. Furusaka et al., "The joint project for high-intensity proton accelerators," KEK Report 99-1; JAERI-Tech 99-056; JHF-99-3, 1999.
51. T. Ogitsu et al., "Superconducting magnet system at the 50 GeV proton beam line for the J-PARC neutrino experiment," IEEE Trans. Appl. Supercond., vol. 14, no. 2, pp. 604-607, 2004.
52. T. Nakamoto et al., "Design of superconducting combined function magnets at the 50 GeV proton beam line for the J-PARC neutrino experiment," IEEE Trans. Appl. Supercond., vol. 14, no. 2, pp. 616-619, 2004.
53. _, "Development of a prototype of superconducting combined function magnet for the 50 GeV proton beam line for the J-PARC neutrino experiment," to appear in these proceedings.
54. A. Goto et al., "Sector magnets for the RIKEN superconducting ring cyclotron," IEEE Trans. Appl. Supercond., vol. 14, no. 2, pp. 300-303, 2004.
55. http://www.esrf.fr/Accelerators/Conferences/ID_Workshop [Online]
56. S. H. Kim et al., "Design and development of a short-period superconducting undulator at the APS," to appear in these proceedings.
57. 3Sn cable," to appear in these proceedings.
58. S. Kubsky et al., "New cryogen free design for superconductive mini-gap undulators," to appear in these proceedings.
59. B. Kostka et al., "Superconductive undulators with variable polarization direction," to appear in these proceedings.
60. E. Willen et al., "Performance summary of the helical magnets for RHIC," in Proc. 2003 Particle Accelerator Conf., 2003, pp. 164-166.
61. T. Roser et al., "Acceleration of polarized beams using multiple strong partial Siberian snakes," in Proc. 2004 European Particle Accelerator Conf., 2004, pp. 1577-1579.
62. T. Obana et al., "Magnetic field design of a superconducting magnet for the FFAG accelerator," to appear in these proceedings.
63. R. Gupta et al., "Radiation resistant HTS quadrupoles for RIA," to appear in these proceedings.
64. 3Sn multifilamentary wire for accelerator magnet applications," Physica C, vol. 354, pp. 449-453, 2001.
65. 3Sn accelerator magnet coils manufactured by the wind & react technique," IEEE Trans. Appl. Supercond., vol. 12, no. 1, pp. 1232-1237, 2002.
66. 3Sn wind & react coils," Adv. Cryo. Eng. (Materials), vol. 50, pp. 266-272, 2003.
67. 3Sn model separator dipole magnet for the CERN LHC," in Proc. 15th Int. Conf. Mag. Technol. Beijing, China: Science Press, 1998, pp. 137-140.
68. 3Sn dipole magnet," IEEE Trans. Appl. Supercond., vol. 11, no. 1, pp. 2268-2271, 2001.
69. S. A. Gourlay, "High field magnet R&D in the USA," IEEE Trans. Appl. Supercond., vol. 14, no. 2, pp. 333-338, 2004.
70. R. Gupta et al., "Status of high temperature superconducting magnet R&D at BNL," IEEE Trans. Appl. Supercond., vol. 14, no. 2, pp. 1198-1201, 2004.
71. J. Cozzolino et al., "Magnet engineering and test results of the high field magnet R&D program at BNL," IEEE Trans. Appl. Supercond., vol. 13, no. 2, pp. 1347-1350, 2003.
72. 3Sn accelerator magnets at Fermilab," to appear in these proceedings.
73. 3Sn cos-theta dipoles based on PIT strands," to appear in these proceedings.
74. 3Sn dipole," in Proc. 1997 Part. Accel. Conf., 1998, pp. 3212-3214.
75. 3Sn superconducting racetrack dipole magnet," in Proc. 2001 Part. Accel. Conf., 2001, pp. 208-210.
76. 3Sn dipole magnet," to appear in these proceedings.
77. P. McIntyre, " 12 T hybrid block-coil dipole for future hadron colliders," IEEE Trans. Appl. Supercond., vol. 11, no. 1, pp. 2264-2267, 2001.