Advances in superconducting magnets for particle physics

IEEE Transactions on Applied Superconductivity

Volumn 14, Issue 2, 2004, Pages 477-484

  Yamamoto, Akira ^a  

^a HIGH ENERGY ACCELERATOR RESEARCH ORGANIZATION KEK   (Japan)

Author keywords

Particle accelerators; Particle detectors; Superconducting magnets; Superconductor

Indexed keywords

ASTROPHYSICS; CURRENT DENSITY; HIGH ENERGY PHYSICS; PARTICLE ACCELERATORS; PARTICLE BEAMS; PARTICLE DETECTORS; SYNCHROTRONS;

COLLISION POINTS; DETECTOR MAGNETS; QUENCH PROPAGATION;

SUPERCONDUCTING MAGNETS;

EID: 4344716252     PISSN: 10518223     EISSN: None     Source Type: Journal    
DOI: 10.1109/TASC.2004.829700     Document Type: Conference Paper

References (46)

1. M. N. Wilson, "Superconductivity and accelerators," IEEE Trans. Appl. Supercond., vol. 9, no. 2, pp. 111-121, June 1999.
2. LHC the Large Hadron Collider Conceptual Design, October 20, 1995.
3. L. Evans, Status of LHC.
4. L. Rossi, "State-of-the-art superconducting accelerator magnets," IEEE Trans. Appl. Supercond., vol. 12, no. 1, pp. 219-227, March 2002.
5. _, "Superconducting magnets for accelerators and detectors," in CERN AT 2003-2, Proc. of CHATS 2002, Karlsrluhe, 2002.
6. M. Anerella et al., "The RHIC magnet system," Nucl. Instr. Meth., vol. A499, pp. 280-315, 2003.
7. H. Brechna, Superconducting Magnet Systems. Berlin: Springer-Verlag, 1973, pp. 30-46.
8. S. Russenschuck, ROXIE: Routine for the Optimization of Magnet X-Sections, Inverse Field Calculation and Coil End Design, 1999.
9. R. Ostojic, Superconducting Magnets for LHC Insertions.
10. A. Yamamoto et al., "Design study of a superconducting insertion quadrupole magnet for the large hadron collider," IEEE Trans. Appl. Supercond., vol. 7, no. 2, pp. 747-750, June 1997.
11. F. Asner, High Field Superconducting Magnets: Oxford Univ., 1999.
12. S. Gourlay, "Post LHC accelerator magnets," IEEE Trans. Appl. Supercond., vol. 12, no. 1, pp. 67-74, March 2002.
13. 3Sn accelerator magnet R&D," IEEE Trans. Appl. Supercond., vol. 12, no. 1, pp. 67-74, March 2002.
14. 3Sn accelerator magnet development around the world," IEEE Trans Appl. Supercond., vol. 13, pp. 1278-1283, June 2003.
15. 3Sn high field dipole," IEEE Trans. Magnetics, vol. 27, pp. 1993-1995, 1991.
16. 3Sn, 1 m long superconducting dipole model magnets for LHC break the 10 tesla field threshold," in Proc. of MT-11 Conference: Elsevier Applied Science, 1990, pp. 36-41.
17. 3Sn superconductors in high-field accelerators magnets," IEEE Trans. Appl. Supercond., vol. 7, no. 2, pp. 733-738, June 1997.
18. 3Sn, NbTi-dipole magnet," IEEE Trans. Appl. Supercond., vol. 7, no. 2, pp. 347-350, June 1997.
19. 3Sn accelerator magnets," IEEE Trans. Appl. Supercond., vol. 12, no. 1, pp. 107-110, March 2003.
20. 3Sn low-beta quadrupoles for 2nd generation LHC IRs," IEEE Trans. Appl. Supercond., vol. 12, no. 1, pp. 1266-1269, March 2003.
21. 3Sn quadrupole magnets for the LHC IR," IEEE Trans. Appl. Supercond., vol. 12, no. 1, pp. 1262-1265, March 2003.
22. A. Devred, High Field Accelerator Magnet R&D.
23. T. Shintomi, M. Wake, K. Tsuchiya, and H. Hirabayashi et al., "The construction and test results of a 10 T dipole magnet," IEEE Trans. Nucl. Science, vol. NS-32, pp. 3719-3721, 1985.
24. A. Abreau et al., "Block-coil dipole for future hadron collider," IEEE Trans. Appl. Supercond., vol. 9, no. 2, pp. 705-708, June 1999.
25. S. Gourlay, High Field Magnet R&D in the USA.
26. R. Gupta et al., "A high field magnet design for a future hadron collider," IEEE Trans. Appl. Supercont., vol. 9, no. 2, pp. 701-704, June 1999.
27. 3Sn DT.
28. 3Al Superconducting Wire for Accelerator Magnets.
29. B. Parker et al., "Magnet for a muon storage ring," in Proc. Panicle Accelerator Conference (PAC), 2001, pp. 3395-3397.
30. T. Ogitsu et al., Superconducting Magnet System at the 50 GeV Proton Beam Line for J-PARC Neutrino Experiment.
31. T. Nakamoto et al., Design of Superconducting Combined Function Magnets at the 50 GeV Proton Beam Line for the J-PARC Neutrino Experiment.
32. T. Taylor, "The choice of spectrometer magnets for LEP," Physica Scripta, vol. 23, pp. 459-464, 1980.
33. A. Yamamoto, "Advances in superconducting magnets for particle physics," Nucl. Instr. Meth. Phys. Res, vol. A 494, pp. 255-265, 2003.
34. D. Swoboda, Toward Starting Up of the ALICE Dipole Magnet.
35. J. Andre, Status of the LHCb Dipole Magnet.
36. A. Herve et al., "Status of the CMS magnet," IEEE Trans. Appl. Supercond., vol. 12, no. 1, pp. 385-390, March 2002.
37. H. ten Kate, "The superconducting magnet system for the ATLAS detector at CERN," IEEE Trans. Appl. Supercond., vol. 11, no. 1, pp. 347-352, March 2001.
38. A. Yamamoto et al., "Design and development of the ATLAS central solenoid," IEEE Trans. Appl. Supercond., vol. 9, no. 2, pp. 852-855, June 1999.
39. P. Vedrin et al., Manufacturing and Integration Progressing the ATLAS Barrel Toroid Magnet at CERN.
40. E. Baynham et al., "ATLAS end-cap toroid magnet cold mass design and manufacturing status," IEEE Trans. Appl. Supercond., vol. 10, no. 1, pp. 357-360, March 2000.
41. B. Blau et al., "The superconducting magnet system of AMS-02," IEEE Trans. Appl. Supercond., vol. 12, no. 1, pp. 349-352, March 2002.
42. A. Yamamoto et al., "A thin superconducting solenoid magnet for particle astrophysics," IEEE Trans. Appl. Supercond., vol. 12, no. 1, pp. 438-441, March 2002.
43. _, "Development toward, ultra-thin superconducting solenoid magnets for high energy particle detectors," Nuclear Phys. B (Proc. Suppl.), vol. 78, pp. 565-571, 1999.
44. F. Fitch, "A review of resistive mechanisms in aluminum," Cryogenics, pp. 349-367, October 1971.
45. R. Reed, "A review of deformation properties, of high purity aluminum and dilute aluminum alloy," Cryogenics, pp. 259-291, August 1972.
46. B. Blau, D. Campi, and S. Horbath et al., "The CMS conductor," IEEE Trans. Appl. Supercond., vol. 12, no. 1, pp. 345-348, March 2002.