메뉴 건너뛰기




Volumn 23, Issue 4, 2005, Pages 788-794

Increase of pullout strength of spinal pedicle screws with conical core: Biomechanical tests and finite element analyses

Author keywords

Finite element analysis; Pedicle screw; Pullout strength; Pullout test

Indexed keywords

POLYURETHAN FOAM;

EID: 21844480606     PISSN: 07360266     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.orthres.2004.11.002     Document Type: Article
Times cited : (162)

References (21)
  • 1
    • 0035851762 scopus 로고    scopus 로고
    • Characteristics of pullout failure in conical and cylindrical pedicle screws after full insertion and back-out
    • B.B. Abshire R.F. McLain A. Valdevit H.E. Kambic Characteristics of pullout failure in conical and cylindrical pedicle screws after full insertion and back-out Spine J 1 2001 408-414
    • (2001) Spine J. , vol.1 , pp. 408-414
    • Abshire, B.B.1    McLain, R.F.2    Valdevit, A.3    Kambic, H.E.4
  • 2
    • 68749104911 scopus 로고    scopus 로고
    • Standard specification for rigid polyurethane foam for use as a standard material for testing orthopedic devices and instruments (F1839-97)
    • Annual book of ASTM Standards, Medical Devices and Services West Conshohocken, The American Society for Testing and Materials
    • Allen RF, Baldini NC, Donofrio PE, Gutman EL, Keefe E, Kramer JG. Standard specification for rigid polyurethane foam for use as a standard material for testing orthopedic devices and instruments (F1839-97). Annual book of ASTM standards, medical devices and services. West Conshohocken, The American Society for Testing and Materials, 1998
    • (1998)
    • Allen, R.F.1    Baldini, N.C.2    Donofrio, P.E.3    Gutman, E.L.4    Keefe, E.5    Kramer, J.G.6
  • 3
    • 32644483612 scopus 로고    scopus 로고
    • Standard test method for determining axial pull-out strength of medical bone screws (F1691-96)
    • Annual book of ASTM Standards, Medical Devices and Services West Conshohocken, The American Society for Testing and Materials
    • Allen RF, Baldini NC, Donofrio PE, Gutman EL, Keefe E, Kramer JG. Standard test method for determining axial pull-out strength of medical bone screws (F1691-96). Annual book of ASTM standards, medical devices and services. West Conshohocken, The American Society for Testing and Materials, 1998
    • (1998)
    • Allen, R.F.1    Baldini, N.C.2    Donofrio, P.E.3    Gutman, E.L.4    Keefe, E.5    Kramer, J.G.6
  • 4
    • 0036708153 scopus 로고    scopus 로고
    • Mechanical properties of adult vertebral cancellous bone: Correlation with collagen intermolecular cross-links
    • X. Banse T.J. Sims A.J. Bailey Mechanical properties of adult vertebral cancellous bone: Correlation with collagen intermolecular cross-links J Bone Miner Res 17 2002 1621-1628
    • (2002) J. Bone Miner. Res. , vol.17 , pp. 1621-1628
    • Banse, X.1    Sims, T.J.2    Bailey, A.J.3
  • 5
    • 0031837773 scopus 로고    scopus 로고
    • Biomechanical study of lumbar pedicle screws: Does convergence affect axial pullout strength?
    • J.W. Barber S.D. Boden T. Ganey W.C. Hutton Biomechanical study of lumbar pedicle screws: Does convergence affect axial pullout strength? J Spinal Disord 11 1998 215-220
    • (1998) J. Spinal Disord. , vol.11 , pp. 215-220
    • Barber, J.W.1    Boden, S.D.2    Ganey, T.3    Hutton, W.C.4
  • 6
    • 0034025662 scopus 로고    scopus 로고
    • Mechanical performance of standard and cannulated 4.0-mm cancellous bone screws
    • G.A. Brown T. McCarthy C.A. Bourgeault D.J. Callahan Mechanical performance of standard and cannulated 4.0-mm cancellous bone screws J Orthop Res 18 2000 307-312
    • (2000) J. Orthop. Res. , vol.18 , pp. 307-312
    • Brown, G.A.1    McCarthy, T.2    Bourgeault, C.A.3    Callahan, D.J.4
  • 7
    • 0344431272 scopus 로고    scopus 로고
    • Moments and forces during pedicle screw insertion: In vitro and in vivo measurements
    • D.W. Buhler U. Berlemann T.R. Oxland L.P. Nolte Moments and forces during pedicle screw insertion: In vitro and in vivo measurements Spine 23 1998 1220-1228
    • (1998) Spine , vol.23 , pp. 1220-1228
    • Buhler, D.W.1    Berlemann, U.2    Oxland, T.R.3    Nolte, L.P.4
  • 8
    • 32644454301 scopus 로고    scopus 로고
    • Assessment of pullout strength of various pedicle screw designs in relation to the changes in bone mineral density
    • 48th Annual Meeting of the Orthopaedic Research Society
    • Choi W, Lee S, Kim JW, Kim JK, Goel V. Assessment of pullout strength of various pedicle screw designs in relation to the changes in bone mineral density. In: 48th Annual Meeting of the Orthopaedic Research Society, 2002
    • (2002)
    • Choi, W.1    Lee, S.2    Kim, J.W.3    Kim, J.K.4    Goel, V.5
  • 9
    • 0028258268 scopus 로고
    • Correlations between screw hole preparation, torque of insertion, and pullout strength for spinal screws
    • T.K. Daftari W.C. Horton W.C. Hutton Correlations between screw hole preparation, torque of insertion, and pullout strength for spinal screws J Spinal Disord 7 1994 139-145
    • (1994) J. Spinal Disord. , vol.7 , pp. 139-145
    • Daftari, T.K.1    Horton, W.C.2    Hutton, W.C.3
  • 11
    • 0035689180 scopus 로고    scopus 로고
    • Fine thread versus coarse thread: A comparison of the maximum holding power
    • T. Gausepohl R. Mohring D. Penning J. Koebke Fine thread versus coarse thread: A comparison of the maximum holding power Injury 32 2001 SD1-SD7
    • (2001) Injury , vol.32
    • Gausepohl, T.1    Mohring, R.2    Penning, D.3    Koebke, J.4
  • 12
    • 0026089378 scopus 로고
    • Hole preparation techniques for transpedicle screws: Effect on pull-out strength from human cadaveric vertebrae
    • D.C. George M.H. Krag C.C. Johnson M.E. Vanhal L.D. Haugh L.J. Grobler Hole preparation techniques for transpedicle screws: Effect on pull-out strength from human cadaveric vertebrae Spine 16 1991 181-184
    • (1991) Spine , vol.16 , pp. 181-184
    • George, D.C.1    Krag, M.H.2    Johnson, C.C.3    Vanhal, M.E.4    Haugh, L.D.5    Grobler, L.J.6
  • 13
    • 0022634973 scopus 로고
    • An internal fixation for posterior application to short segments of the thoracic, lumbar, or lumbosacral spine: Design and testing
    • M.H. Krag B.D. Beynnon M.H. Pope J.W. Frymoyer L.D. Haugh D.L. Weaver An internal fixation for posterior application to short segments of the thoracic, lumbar, or lumbosacral spine: Design and testing Clin Orthop 203 1986 75-98
    • (1986) Clin. Orthop. , vol.203 , pp. 75-98
    • Krag, M.H.1    Beynnon, B.D.2    Pope, M.H.3    Frymoyer, J.W.4    Haugh, L.D.5    Weaver, D.L.6
  • 14
    • 0029825385 scopus 로고    scopus 로고
    • Insertional torque and pull-out strengths of conical and cylindrical pedicle screws in cadaveric bone
    • A.W.L. Kwok J.A. Finkelstein T. Woodside T.C. Hearn R.W. Hu Insertional torque and pull-out strengths of conical and cylindrical pedicle screws in cadaveric bone Spine 21 1996 2429-2434
    • (1996) Spine , vol.21 , pp. 2429-2434
    • Kwok, A.W.L.1    Finkelstein, J.A.2    Woodside, T.3    Hearn, T.C.4    Hu, R.W.5
  • 15
    • 0034464574 scopus 로고    scopus 로고
    • Comparison of the in vitro holding strengths of conical and cylindrical pedicle screws in a fully inserted setting and backed out 180 degrees
    • C.A. Lill U. Schlegel D. Wahl E. Schneider Comparison of the in vitro holding strengths of conical and cylindrical pedicle screws in a fully inserted setting and backed out 180 degrees J Spinal Disord 13 2000 259-266
    • (2000) J. Spinal Disord. , vol.13 , pp. 259-266
    • Lill, C.A.1    Schlegel, U.2    Wahl, D.3    Schneider, E.4
  • 16
    • 0035087801 scopus 로고    scopus 로고
    • Bending strength and holding power of tibial locking screws
    • J. Lin S.J. Lin H. Chiang S.M. Hou Bending strength and holding power of tibial locking screws Clin Orthop 385 2001 199-206
    • (2001) Clin. Orthop. , vol.385 , pp. 199-206
    • Lin, J.1    Lin, S.J.2    Chiang, H.3    Hou, S.M.4
  • 17
    • 0033998139 scopus 로고    scopus 로고
    • Can insertion torque predict screw loosening and related failures? An in vivo study of pedicle screw fixation augmenting posterior lumbar interbody fusion
    • K. Okuyama E. Abe T. Suzuki Y. Tamura M. Chiba K. Sato Can insertion torque predict screw loosening and related failures? An in vivo study of pedicle screw fixation augmenting posterior lumbar interbody fusion Spine 25 2000 858-864
    • (2000) Spine , vol.25 , pp. 858-864
    • Okuyama, K.1    Abe, E.2    Suzuki, T.3    Tamura, Y.4    Chiba, M.5    Sato, K.6
  • 18
    • 0034888612 scopus 로고    scopus 로고
    • Triangulated pedicle screw construct technique and pull-out strength of conical and cylindrical screws
    • A. Ono M.D. Brown L.L. Latta E.L. Milne D.C. Holmes Triangulated pedicle screw construct technique and pull-out strength of conical and cylindrical screws J Spinal Disord 14 2001 323-329
    • (2001) J. Spinal Disord. , vol.14 , pp. 323-329
    • Ono, A.1    Brown, M.D.2    Latta, L.L.3    Milne, E.L.4    Holmes, D.C.5
  • 20
    • 0027300763 scopus 로고
    • A prospective, randomized study of lumbar fusion: Preliminary results
    • T.A. Zdeblick A prospective, randomized study of lumbar fusion: preliminary results Spine 18 1993 983-991
    • (1993) Spine , vol.18 , pp. 983-991
    • Zdeblick, T.A.1
  • 21
    • 0027203876 scopus 로고
    • Pedicle screw pullout strength: Correlation with insertional torque
    • T.A. Zdeblick D.N. Kunz M.E. Cooke R. McCabe Pedicle screw pullout strength: Correlation with insertional torque Spine 18 1993 1673-1676
    • (1993) Spine , vol.18 , pp. 1673-1676
    • Zdeblick, T.A.1    Kunz, D.N.2    Cooke, M.E.3    McCabe, R.4


* 이 정보는 Elsevier사의 SCOPUS DB에서 KISTI가 분석하여 추출한 것입니다.