-
2
-
-
0027686549
-
The shear strength and the failure mode of plasma-sprayed hydroxyapatite coating to bone; the effect of coating thickness
-
B. C. Wang, T. M. Lee, E. Chang, and C. Y. Yang, "The shear strength and the failure mode of plasma-sprayed hydroxyapatite coating to bone; the effect of coating thickness," J Biomed Mater Res, vol. 27, pp. 1315-1327, 1993.
-
(1993)
J Biomed Mater Res
, vol.27
, pp. 1315-1327
-
-
Wang, B.C.1
Lee, T.M.2
Chang, E.3
Yang, C.Y.4
-
3
-
-
0025419977
-
The influence of physical properties and spraying parameters on the creation of residual thermal stresses during the spraying process
-
R. Elsing, O. Knotek, and U. Baiting, "The influence of physical properties and spraying parameters on the creation of residual thermal stresses during the spraying process," Surf Coat Technol, vol. 41, pp. 147-156, 1990.
-
(1990)
Surf Coat Technol
, vol.41
, pp. 147-156
-
-
Elsing, R.1
Knotek, O.2
Baiting, U.3
-
4
-
-
0028500109
-
Residual stress measurement in thermal sprayed hydroxyapatite coatings
-
S. R. Brown, I. G. Turner, and H. Reiter, "Residual stress measurement in thermal sprayed hydroxyapatite coatings," J. Mater. Sci., Materials in Medicine, vol. 5, pp. 756-759, 1994.
-
(1994)
J. Mater. Sci., Materials in Medicine
, vol.5
, pp. 756-759
-
-
Brown, S.R.1
Turner, I.G.2
Reiter, H.3
-
5
-
-
0034011307
-
Biaxial residual stress states of plasma-sprayed hydroxyapatite coatings on titanium alloy substrate
-
Y. C. Yang, E. Chang, B. H. Hwang, and S. Y. Lee, "Biaxial residual stress states of plasma-sprayed hydroxyapatite coatings on titanium alloy substrate," Biomaterials, vol. 21, pp. 1327-1337, 2000.
-
(2000)
Biomaterials
, vol.21
, pp. 1327-1337
-
-
Yang, Y.C.1
Chang, E.2
Hwang, B.H.3
Lee, S.Y.4
-
6
-
-
0035372007
-
Elastic and plastic behavior of plasma-sprayed hydroxyapatite coatings on a Ti-6Al-4V substrate
-
C. Zhang, Y. Leng, and J. Chen, "Elastic and plastic behavior of plasma-sprayed hydroxyapatite coatings on a Ti-6Al-4V substrate," Biomaterials, vol. 22, pp. 1357-1363, 2001.
-
(2001)
Biomaterials
, vol.22
, pp. 1357-1363
-
-
Zhang, C.1
Leng, Y.2
Chen, J.3
-
7
-
-
0033080911
-
Direct morphological comparison of vacuum plasma sprayed and detonation gun sprayed hydroxyapatite coatings for orthopaedic applications
-
H. C. Gledhill, I. G. Turner, and C. Doyle, "Direct morphological comparison of vacuum plasma sprayed and detonation gun sprayed hydroxyapatite coatings for orthopaedic applications," Biomaterials, vol. 20, pp. 315-322, 1999.
-
(1999)
Biomaterials
, vol.20
, pp. 315-322
-
-
Gledhill, H.C.1
Turner, I.G.2
Doyle, C.3
-
8
-
-
0028485234
-
Densification and strengthening of silver-reinforced hydroxyapatite- matrix composite prepared by sintering
-
T. K. Chaki and P. E. Wang, "Densification and strengthening of silver-reinforced hydroxyapatite-matrix composite prepared by sintering," J. Mater. Sci. Mater. Med., vol. 5, pp. 533-542, 1994.
-
(1994)
J. Mater. Sci. Mater. Med.
, vol.5
, pp. 533-542
-
-
Chaki, T.K.1
Wang, P.E.2
-
9
-
-
0344558762
-
Plasma sprayed hydroxyapatite coatings on titanium substrates. Part I: Mechanical properties and residual stress levels
-
Y. C. Tsui, C. Doyle, and T. W. Clyne, "Plasma sprayed hydroxyapatite coatings on titanium substrates. Part I: mechanical properties and residual stress levels," Biomaterials, vol. 19, pp. 2015-2029, 1998.
-
(1998)
Biomaterials
, vol.19
, pp. 2015-2029
-
-
Tsui, Y.C.1
Doyle, C.2
Clyne, T.W.3
-
10
-
-
0001657576
-
Bioactive surface coatings for hard tissue biomaterials
-
T. Yakamuro, L. L. Hench, and J. Wilson, Eds. Boston, MA: CRC
-
J. F. Kay, "Bioactive surface coatings for hard tissue biomaterials," in CRC Handbook of Bioactive Ceramics, T. Yakamuro, L. L. Hench, and J. Wilson, Eds. Boston, MA: CRC, 1990, vol. II, pp. 111-122.
-
(1990)
CRC Handbook of Bioactive Ceramics
, vol.2
, pp. 111-122
-
-
Kay, J.F.1
-
11
-
-
0025519697
-
Tensile deformation of 2618 and Al-Fe-Si-V aluminum alloys at elevated temperatures
-
Y. Leng, W. C. Porr Jr, and R. P. Ganglo, "Tensile deformation of 2618 and Al-Fe-Si-V aluminum alloys at elevated temperatures," Scripta Metall, vol. 24, p. 2163, 1990.
-
(1990)
Scripta Metall
, vol.24
, pp. 2163
-
-
Leng, Y.1
Porr Jr., W.C.2
Ganglo, R.P.3
-
12
-
-
0342298561
-
Simulation of the thermo-mechanical behavior and residual stresses in the spray coating process
-
D. Y. Ju, M. Nishida, and T. Hanabusa, "Simulation of the thermo-mechanical behavior and residual stresses in the spray coating process," J. Mater. Process. Technol., vol. 92/93, pp. 243-250, 1999.
-
(1999)
J. Mater. Process. Technol.
, vol.92-93
, pp. 243-250
-
-
Ju, D.Y.1
Nishida, M.2
Hanabusa, T.3
-
13
-
-
0036196192
-
Hydroxyapatite-coated Ti-6Al-4V, Part I: The effect of coating thickness on mechanical fatigue behavior
-
A. K. Lynn and D. L. DuQuesnay, "Hydroxyapatite-coated Ti-6Al-4V, Part I: the effect of coating thickness on mechanical fatigue behavior," Biomaterials, vol. 23, pp. 1937-1946, 2002.
-
(2002)
Biomaterials
, vol.23
, pp. 1937-1946
-
-
Lynn, A.K.1
Duquesnay, D.L.2
-
14
-
-
0037090973
-
Computational analysis of the influence of a substrate, solid shield and gas shroud on the flow 316 field of a plasma jet
-
D. T. Gawne, T. Zhang, and B. Liu, "Computational analysis of the influence of a substrate, solid shield and gas shroud on the flow 316 field of a plasma jet," Surface Coatings Technol., vol. 153, pp. 138-147, 2002.
-
(2002)
Surface Coatings Technol.
, vol.153
, pp. 138-147
-
-
Gawne, D.T.1
Zhang, T.2
Liu, B.3
-
15
-
-
10444240446
-
Agglomerated nanostructured particles disintegration during the plasma thermal spraying process
-
P. Fogarassy, D. Gerday, and A. Lodini. (2005) Agglomerated nanostructured particles disintegration during the plasma thermal spraying process. Mechanics Res. Commun. [Online]. Available: http://www.sciencedirect. com
-
(2005)
Mechanics Res. Commun. [Online]
-
-
Fogarassy, P.1
Gerday, D.2
Lodini, A.3
|