Deformation behavior of "Shirasu" and its prediction by the subloading surface model

Soils and Foundations

Volumn 42, Issue 5, 2002, Pages 37-46

  Hira, Mizuki ^a   Hashiguchi, Koichi ^b   Okayasu, Takashi ^b   Miwa, Koichi ^a  

^a KAGOSHIMA UNIVERSITY   (Japan)

^b KYUSHU UNIVERSITY   (Japan)

Author keywords

Constitutive equation; Elasto plasticity; Shirasu; Stress strain relation; Subloading surface model; Triaxial test (IGC: D6 E2)

Indexed keywords

COMPACTION; COMPRESSIBILITY OF SOLIDS; DYNAMIC LOADS; ELASTOPLASTICITY; HARDENING; ROTATION; SHEAR DEFORMATION; STRESSES; STRUCTURAL LOADS;

CONSTITUTIVE EQUATIONS; SHIRASU; STRESS-STRAIN RELATIONS; SUBLOADING SURFACE MODEL; TRIAXIAL TEST (IGC: D6/E2);

SOIL MECHANICS;

EID: 2142706130     PISSN: 00380806     EISSN: None     Source Type: Journal    
DOI: 10.3208/sandf.42.5_37     Document Type: Article

References (52)

1. Asaoka, A., Nakano, M. and Noda, T. (1997): Soil-water coupled behavior of heavily overconsolidated clay near/at critical state, Soils and Foundations, 37 (1), 13-28.
2. Dafalias, Y. F. and Popov, E. P. (1975): A model of nonlinearly hardening materials for complex loading, Acta Mech., 23, 173-192.
3. Dafalias, Y. F. (1985): The plastic spin, J. Appl. Mech. (ASME), 52, 865-871.
4. Drucker, D. C. and Prager, W. (1952): Soil mechanics and plastic analysis or limit design, Quart. Appl. Math., 10, 157-164.
5. Drucker, D. C. (1988): Conventional and unconventional plastic response and representation, Appl. Mech. Rev. (ASME), 41, 151-167.
6. Haruyama, M. (1966): Drained shear characteristics on the disturbed Shirasu, Tsuchi-to-Kiso, JSSMFE, 14 (8), 27-33 (in Japanese).
7. Haruyama, M. (1969): Effect of water content on the shear characteristics of granular soils such as Shirasu, Soils and Foundations, 9 (3), 35-57.
8. Haruyama, M. (1973): Geological, physical, and mechanical properties of Shirasu and its engineering classification, Soils and Foundations, 13 (3), 45-60.
9. Haruyama, M. (1977): Deformation characteristics of highly compressible sand "Shirasu," Soils and Foundations, 17 (1), 39-51.
10. Haruyama, M. (1979): A method of the identification and classification of pyroclastic flow deposits due to hardness, Soils and Foundations, 19 (1), 81-92.
11. Haruyama, M. (1979): Sample preparation and back pressure for undrained triaxial test on volcanic coarse-grained soil "Shirasu," Soils and Foundations, 19 (1), 109-115 (in Japanese).
12. Haruyama, M. (1981): Anisotropic deformation-strength characteristics of an assembly of spherical particles under three dimensional stresses, Soils and Foundations, 21 (4), 41-55.
13. Haruyama, M. and Kitamura, R. (1984): Anisotropic deformation-strength properties of soft sedimentary rock 'Shirasu' originated from pyroclastic flows, Soils and Foundations, 24 (4), 84-94.
14. Haruyama, M. (1985): Drained deformation-strength characteristics of loose Shirasu (volcanic sandy soil) under three dimensional stresses, Soils and Foundations, 25 (1), 65-76.
15. Haruyama, M. (1987): Effect of density on the drained deformation behavior of Shirasu (volcanic sandy soil) under three-dimensional stresses, Soils and Foundations, 27 (1), 1-13.
16. Hashiguchi, K. (1974): Isotropic hardening theory of granular media, Proc. JSCE, (227), 45-60.
17. Hashiguchi, K. and Ueno, M. (1977): Elastoplastic constitutive laws of granular materials, Constitutive Equations of Soils, Proc. 9th ICFSME, Spec. Sess. 9, Tokyo, JSSMFE, Tokyo, 73-82.
18. Hashiguchi, K. (1978): Plastic constitutive equations of granular materials, Proc. US-Japan Seminar Continuum Mech. Stast. Appr. Mech. Granular Materials, Sendai, 321-329.
19. Hashiguchi, K. (1980): Constitutive equations of elastoplastic materials with elastic-plastic transition, J. Appl. Mech. ASME, 47, 266-272.
20. Hashiguchi, K. (1981): Constitutive equations of elastoplastic materials with anisotropic hardening and elastic-plastic transition, J. Appl. Mech. ASME, 48, 297-301.
21. Hashiguchi, K. (1985): Macrometric approaches - static - intrinsically time-independent, Constitutive Laws of Soils, Proc. 11th ICFSME, Discuss. Sess. 1A, San Francisco, JSSMFE, 25-65.
22. Hashiguchi, K. (1988): A mathematical modification of two surface model formulation in plasticity, Int. J. Solids Struct., 24, 987-1001.
23. Hashiguchi, K. (1989): Subloading surface model in unconventional plasticity, Int. J. Solids Struct., 25, 917-945.
24. Hashiguchi, K. (1993a): Mechanical requirements and structures of cyclic plasticity models, Int. J. Plasticity, 9, 721-748.
25. Hashiguchi, K. (1993b): Mechanical requirements and structures of cyclic plasticity models, Int. J. Plasticity, 9, 721-748.
26. Hashiguchi, K. (1994): Subloading surface model with rotational hardening, Proc. Int. Conf. Compt. Meth. Struct. Geotech. Eng., Hong Kong, 807-812.
27. Hashiguchi, K. (1995): On the linear relation of V-In p and In v-In p for isotropic consolidation of soils, Int. J. Numer. Anal. Meth. Geomech., 19, 367-376.
28. Hashiguchi, K. (1997): The extended flow rule in plasticity, Int. J. Plasticity, 13, 37-58.
29. Hashiguchi, K. and Chen, Z.-P. (1998): Elastoplastic constitutive equation of soils with the subloading surface and the rotational hardening, Int. J. Numer. Anal. Mech. Geomech., 22, 197-227.
30. Hashiguchi, K. (2000): Fundamentals in constitutive equation: continuity and smoothness conditions and loading criterion, Soils and Foundations, 40 (3), 155-161.
31. Hashiguchi, K. and Collins, I. F. (2001): Stress rate-elastic stretching relations in elastoplastic constitutive equations, Soils and Foundations, 41 (2), 77-87.
32. Hashiguchi, K., Saitoh, K., Okayasu, T. and Tsutsumi, S. (2001): Evaluation of conventional and unconventional plasticity for prediction of softening behavior, J. App. Mech. (JSCE), 4, 375-382 (in Japanese).
33. Hashiguchi, K. (2001): Description of inherent/induced anisotropy of soils: Rotational hardening rule with objectivity, Soils and Foundations, 41 (6), 139-145.
34. Hill, R. (1958): A general theory of uniqueness and stability in elastic-plastic solids, J. Mech. Phys. Solids, 6, 236-249.
35. Hill, R. (1967): On the classical constitutive relations for elastic/plastic solids, Recent Progress Appl. Mech. (The Folke Odqvist Volume), John Wiley and Sons, 241-249.
36. Iwan, W. D. (1967): On a class of models for the yielding behavior of continuous and composite systems, J. Appl. Mech. (ASME), 34, 612-617.
37. Krieg, R. D. (1975): A practical two surface plasticity theory, J. Appl. Mech. (ASME), 42, 641-646.
38. Krieg, R. D. and Krieg, D. B. (1977): Accuracies of numerical solution methods for the elastic-perfectly plastic models, J. Pressure Vessel Tech. (ASME), 99, 510-515.
39. Mroz, Z. (1966): On forms of constitutive laws for elastic-plastic solids, Archiwum Mechaniki Stosowanej, 18, 1-34.
40. Mroz, Z. (1967): On the description of anisotropic hardening, J. Mech. Phys. Solids, 15, 163-175.
41. Mroz, Z., Norris, V. A. and Zienkiewicz, O. C. (1981): An anisotropic, critical state model for soils subjected to cyclic loading, Géotechnique, 31, 451-469.
42. Newland, P. L. and Alley, B. H. (1957): Volume changes in drained triaxial tests on granular materials, Géotechnique, 7, 17-32.
43. Noda, T., Nakano, M., Mizuno, K. and Takeuchi, H. (2001): A soil-water coupled analysis on the effect of improvement of a loose sandy ground by cylindrical cavity expansion, Soils and Foundations, 41 (4), 113-123 (in Japanese).
44. Pillinger, I., Hartley, P., Sturgess, C. E. N. and Rowe, G. W. (1986): Use of a mean-normal large-strain elastic-plastic finite-element solutions, Int. J. Mech. Sci., 22, 23-29.
45. Rad, N. S. and Clough, G. W. (1984): New procedure for saturating sand specimens, J. Geo. Eng. Div. (ASCE), 110, 1205-1218.
46. Roscoe, K. H. and Burland, J. B. (1968): On the generalized stress-strain behavior of 'wet' clay, Engineering Plasticity (eds. by Heyman, J. and Leckie, F. A.), Cambridge Univ. Press, 535-608.
47. Schofield, A. N. and Wroth, C. P. (1968): Critical State Soil Mechanics, McGraw-Hill, London.
48. Sekiguchi, H. and Ohta, H. (1977): Induced anisotropy and time dependency in clays, Constitutive Equations of Soils, Proc. 9th ICFSME, Spec. Session 9, Tokyo, JSSMFE, Tokyo, 229-238.
49. Taylor, D. W. (1948): Fundamentals of soil mechanics, John Wiley, New York, 329-359.
50. Topolnicki, M. (1990): An elasto-plastic subloading surface model for clay with isotropic and kinematic mixed hardening parameters, Soils and Foundations, 30 (2), 103-113.
51. Yamada, Y., Yoshimura, N. and Sakurai, T. (1968): Plastic stress-strain matrix and its application for the solution of elastic-plastic problems by finite element method, Int. J. Mech. Sci., 10, 343-354.
52. Zbib, H. M. and Aifantis, E. C. (1988): On the concept of relative and plastic and its implications to large deformation theories. Part I: Hypoelasticity and vertex-type plasticity, Acta. Mech., 75, 15-33.