The extended flow rule in plasticity

International Journal of Plasticity

Volumn 13, Issue 1-2, 1997, Pages 37-58

  Hashiguchi, K ^a  

^a KYUSHU UNIVERSITY   (Japan)

Author keywords

B. anisotropic material; Constitutive behaviour; Cyclic loading; Elastic plastic material

Indexed keywords

ANELASTIC RELAXATION; ANISOTROPY; KINEMATICS; MATHEMATICAL MODELS; STIFFNESS; STRESSES; TENSORS;

CYCLIC LOADING; FLOW RULES;

ELASTOPLASTICITY;

EID: 0030643530     PISSN: 07496419     EISSN: None     Source Type: Journal    
DOI: 10.1016/S0749-6419(96)00052-6     Document Type: Article

References (70)

1. 1924 Hencky, H., "Zur Theorie plastischer Deformation und der hierdurch im Material herforgerufenen Nachspannungen," Z.A.M.M., 4, 323.
2. 1947 Handelman, G.H., Lin, C.C. and Prager, W., "On the Mechanical Behavior of Metals in the Strainhardening Range," Quart. Appl. Mech., 4, 397.
3. 1949 Batdorf, S.B. and Budiansky, B., "A Mathematical Theory of Plasticity Based on the Concept of Slip," NACA, TC1871.
4. 1949 Prager, W., "Recent Development in the Mathematical Theory of Plasticity," J. Appl. Mech. (ASME), 20, 235.
5. 1951 Drucker, D.C., "A More Fundamental Approach to Plastic Stress-Strain Relations," Proc. 1st U.S. National Congr. Appl. Mech. (ASME), 1, 487.
6. 1953 Koiter, W.T., "Stress-strain Relations, Uniqueness and Variational Theories for Elastic-plastic Materials with Singular Yield Surfaces," Quart. Appl. Math., 11, 350.
7. 1955 Rivlin, R. and Ericksen, I.L., "Stress-deformation Relations for Isotropic Materials," J. Rat. Mech. Anal., 4, 323.
8. 1955 Truesdell, C., "Hypo-elasticity," J. Rat. Mech. Anal, 4, 83.
9. 1957 Bland, D.R., "The Associated Flow Rule of Plasticity," J. Mech. Phys. Solids, 6, 71.
10. 1958 Hill, R., "A General Theory of Uniqueness and Stability in Elastic-plastic Solids," J. Mech. Phys. Solids, 6, 236.
11. 1959 Budiansky, B., "A Reassessment of Deformation Theories of Plasticity," J. Appl. Mech. (ASME), 26, 259.
12. 1961 Ilyushin, A.A., "On the Postulate of Plasticity," Appl. Math. Mech., 25, 746. (Translation of O Postulate Plastichnosti, Prikladnaya Mathematika i Mekhanika, 25, 503.
13. 1961 Ilyushin, A.A., "On the Postulate of Plasticity," Appl. Math. Mech., 25, 746. (Translation of O Postulate Plastichnosti, Prikladnaya Mathematika i Mekhanika, 25, 503.
14. 1964 Drucker, D.C., "On the Postulate of Stability of Material in the Mechanics of Continua," J. de Mechanique, 3, 235.
15. 1964 Spencer, A.J.M., "A Theory of Kinematics of Ideal Soil under Plane Strain Conditions," J. Mech. Phys. Solids, 12, 337.
16. 1965 Mandel, J., "Generalisation de la Theorie de Plasticite de W.T. Koiter," Int. J. Solids Struct., 1, 273.
17. 1966 Hill, R., "Generalized Constitutive Relations for Incremental Deformation of Metal Crystals," J. Mech. Phys. Solids, 14, 95.
18. 1966 Mroz, Z., "On Forms of Constitutive Laws for Elastic-plastic Solids," Archiwum Mechaniki Stosowanej, 18, 3.
19. 1966 Mandel J., "Sur les Equations D'ecoulement des Sols Ideaux en Deformation Plane et le Concept du Double Glissement," J. Mech. Phys. Solids, 14, 303.
20. 1967a Hill, R., "On the Classical Constitutive Relations for Elastic/Plastic Solids," in Recent Progress in Appl. Mech. (The Folke Odqvist Volume). Wiley, Chichester, p. 241.
21. 1967b Hill, R., "The Essential Structures of Constitutive Laws for Metal Composites and Crystals," J. Mech. Phys. Solids, 15, 79.
22. 1968 Yamada, Y., Yoshimura, N. and Sakurai, T., "Plastic Stress-strain Matrix and its Application for the Solution of Elastic-plastic Problems by Finite Element Method," Int. J. Mech. Sci., 10, 343.
23. 1970 Mandl, G. and Luque, R.F., "Fully Developed Plastic Shear Flow of Granular Materials," Geotechnique, 20, 277.
24. 1971 Hashiguchi, K., "Theories on a Velocity Field for General Dilatable Plastic Soils - Concept of Double Slippage-," Trans. JSCE, 3 (Part 1), 72.
25. 1971 Valanis, K.C., "Theory of Visco-Plasticity without a Yield Surface," Arch. Mech., 23, 517.
26. 1973 Sewell M.J., "A Yield-surface Corner Lowers the Buckling Stress of an Elastic-plastic Plate under Compression," J. Mech. Phys. Solids, 21, 19.
27. 1973 Stutz, P., "Comportement Elastoplastique des Milieux Pulverulents," Sci. et Tech. de l'Armement, 47, 475.
28. 1974 Romano, M., "A Continuum Theory for Granular Media with a Critical State," Arch. Mech., 26, 1011.
29. 1974 Sewell, M.J., "A Plastic Flow at a Yield Vertex," J. Mech. Phys. Solids, 22, 469.
30. 1975 Rudnicki, J.W. and Rice, J.R., "Conditions for Localization of Deformation in Pressure-sensitive Dilatant Materials," J. Mech. Phys. Solids, 23, 371.
31. 1975 Storen, S. and Rice, J.R., "Localized Necking in Thin Sheet," J. Mech. Phys. Solids, 23 421.
32. 1976 Hecker, S.S., "Experimental Studies of Yield Phenomena in Biaxially Loaded Metals," ASME. AMD-20, 1
33. 1977 Krieg, R.D. and Krieg, D.B., "Accuracies of Numerical Solution Methods for the Elastic-perfectly Plastic Models," J. Pressure Vessel Tech. (ASME), 99, 510.
34. 1978 Davis, R.O. and Mullenger, G., "A Rate-type Constitutive Model for Soil with a Critical State," Int. J. Numer. Anal. Meth. Geomech.," 2, 255.
35. 1978 Mehrabadi, M.M. and Cowin, S.C., "Initial Planar Deformation of Dilatant Granular Materials," J. Mech. Phys. Solids, 26, 269.
36. 1979 Christoffersen, J. and Hutchinson, J.W., "A Class of Phenomenological Corner Theories of Plasticity," J. Mech. Phys. Solids, 27, 465.
37. 1979 Ikegami, K. "Experimental Plasticity on the anisotropy of Metals," Proc. Euromech. Colloquium, 115, 201.
38. 1979 Ito, K., "New Flow Rule for Elastic-plastic Solids Based on KBW Model with a View to Lowering the Buckling Stress of Plates and Shells," Tech. Report Tohoku Univ., 44, 199.
39. 1980 Hashiguchi, K., "Constitutive Equations of Elastoplastic Materials with Elastic-plastic Transition," J. Appl. Mech. (ASME), 47, 266.
40. 1980 Mroz, Z., "On Hypoelasticity and Plasticity of Approaches to Constitutive Model of Inelastic Behavior of Soils," Int. J. Numer. Anal. Meth. Geomech., 4, 45.
41. 1981 Dragusin, L., "Hypo-elastic Model for Soils," Int. J. Eng. Sci., 19, 511.
42. 1981 Mehrabadi, M.M. and Cowin, S.C., "On the Double-sliding Free Rotating Model for the Deformation of Granular Materials," J. Mech. Phys. Solids, 29, 282.
43. 1982 Darve, F. and Lavanieh, S., "Incremental Constitutive Law for Sands and Clays: Simulations of Monotonic and Cyclic Tests," Int. J. Numer. Meth. Geomech., 6, 243.
44. 1982 Dorris, J.F. and Nemat-Nasser, S., "A Plasticity Model for Flow of Granular Materials under Triaxial Stress States," Int. J. Solids Struct., 18, 497.
45. 1982 Lehmann, TH, "Some Considerations and Experimental Results Concerning Elastic-plastic Stress-strain Relations," Ing.-Arch., 52, 391.
46. 1982 Spencer, A.J.M., "Deformation of Ideal Granular Materials," in Hopkins, H.G. and Sewell, M.J. (eds.), Mechanics of Solids. Oxford Univ. Press, Oxford, p. 607.
47. 1983 Anand, L., 'Plane Deformation of Ideal Granular Materials," J. Mech. Phys. Solids, 31, 105.
48. 1983 Nemat-Nasser, S., "On Finite Plastic Flow of Crystalline Solids and Geomaterials," J. Appl. Mech. (ASME), 50, 1114.
49. 1983 Pande, G.N. and Sharma, K.G., "Multilaminate Model of Clay - A Numerical Evaluation of the Influence of Rotation of the Principal Stress Axes," Int. J. Numer. Anal. Meth. Geomech., 7, 397.
50. 1985 Dafalias, Y.F., "The Plastic Spin," J. Appl. Mech. (ASME), 52, 865.
51. 1985 Gotoh, M., "A Class of Plastic Constitutive Relations with Vertex Effect," Int. J. Solids Struct., 21, 1101.
52. 1986 Pillinger, I., Hartley, P., Sturgess, C.E.N. and Rowe, G.W., "Use of a Mean-normal Large-strain Elastic-plastic Finite-element Solutions," Int. J. Mech. Sci., 28, 23.
53. 1986 Tomita, Y., Shindoh, A., Kim, Y.S. and Michiura, K., "Deformation Behavior of Elastic-plastic Tubes under Extended Pressure and Axial Load," Int. J. Mech. Sci., 20, 263.
54. 1988 Bazant, Z.P. and Prat, P.C., "Microplane Model for Brittle-Plastic Material: I. Theory," J. Eng. Mech. (ASCE), 114, 1673.
55. 1989a Hashiguchi, K., "Subloading Surface Model in Unconventional Plasticity," Int. J. Solids Structures, 25, 917.
56. 1989b Hashiguchi, K., "Subloading Surface Model with Tangential Plasticity," in Khan, A.S. and Tokuda, M. (eds.), Proc. 2nd Int. Symp. Plasticity. Pergamon Press, Oxford, p. 451.
57. 1989 Runesson, K. and Mroz, Z., "A Note on Nonassociated Plastic Flow Rules," Int. J. Plasticity, 5, 639.
58. 1990 Wang, Z.-L., Dafalias, Y.F. and Shen, C.-K., "Bounding Surface Hypoplasticity Model for Sand," J. Eng. Mech. (ASCE), 116, 983.
59. 1991 Goya, M. and Ito, K., "An Expression of Elastic-plastic Constitutive Laws Incorporating Vertex Formulation and Kinematic Hardening," J. Appl. Mech. (ASME), 58, 617.
60. 1991 Hashiguchi, K., "Inexpedience of the Non-associated Flow Rule," Int. J. Numer. Anal. Meth. Geomech., 15, 752.
61. 1991 Ito, K., Goya, M., Takahashi, H. and Takatsu, N., "An Expression of Elastic-plastic Constitutive Law Incorporating a Stress Increment Dependence (4th Report; Determination of Stress Increment Dependency Parameters at the Proportionally Prestressed State), Trans. Japan Soci. Mech. Engrs., 57, 141.
62. 1991 Kolymbas, D., "The Outline of Hypoplasticity," Ing.-Arch., 61, 143.
63. 1991 Zbib, H.M., "On the Mechanics of Large Inelastic Deformations: Non-coaxiality, Axial Effects in Torsion and Localization," Acta Mech., 87, 179.
64. 1992 Ito, K., Goya, M. and Takahashi, H., "An Expression of Elastic-plastic Constitutive Law Incorporating a Stress Increment Dependence (Evolutional Equation of Stress Increment Dependency Parameters on Stress Path), in Benallal, A., Billardon, R. and Marquis, D. (eds.), Proc. Int. Seminar on Mechanics of Materials: Multiaxial Plasticity, Cachan, p. 689.
65. 1993 Papamichos, E., Vardoulakis, S, I. and Han, C., "Noncoaxial Flow Theory of Plasticity: Shear Failure Prediction in Sand," in Kolymbas, D. (ed.), Modern Approaches to Plasticity, Elsevier, Amsterdam, p. 585.
66. 1993 Vermeer, P., "Upgrading of Soil Models by Hencky's Theory of Plasticity," idem, p. 71.
67. 1993a Hashiguchi, K., "Fundamental Requirements and Formulation of Elastoplastic Constitutive Equations with Tangential Plasticity," Int. J. Plasticity, 9, 525.
68. 1993b Hashiguchi, K., "Mechanical Requirements and Structures of Cyclic Plasticity Models," Int. J. Plasticity, 9, 721.
69. 1994 Hashiguchi, K., "On the Loading Criterion," Int. J. Plasticity, 10, 871.
70. 1995 Goya, M., Miyagi, K., Ito, K., Sueyoshi, T and Itomura, S., "Comparison between Numerical and Analytical Prediction of Shear Localization of Sheets Subjected to Biaxial Tension," in Atluri, S.N., Yagawa, G. and Cruse, T.A. (eds.), Proc, Int. Conf. Comput. Mech., Springer, Berlin, p. 1396.