Shotcrete elasticity revisited in the framework of continuum micromechanics: From submicron to meter level

Journal of Materials in Civil Engineering

Volumn 17, Issue 3, 2005, Pages 246-256

  Hellmich, Christian ^a   Mang, Herbert ^a  

^a VIENNA UNIVERSITY OF TECHNOLOGY   (Austria)

Author keywords

Composite materials; Elasticity; Micromechanics; Poisson ratio; Shotcrete; Tunneling

Indexed keywords

CEMENTS; CIVIL ENGINEERING; COMPOSITE MICROMECHANICS; CONCRETES; ELASTICITY; FAILURE ANALYSIS; HYDRATES; HYDRATION; POLYCRYSTALS; RISK ASSESSMENT; STIFFNESS; STRUCTURES (BUILT OBJECTS);

CHEMOMECHANICAL BEHAVIORS; CONTINUUM MICROMECHANICS; FAILURE RISK ASSESSMENT; QUANTITATIVE INFORMATION; SPRAYED CONCRETE;

CONTINUUM MECHANICS;

MECHANICAL PROPERTY; SHOTCRETE;

EID: 20444438721     PISSN: 08991561     EISSN: None     Source Type: Journal    
DOI: 10.1061/(ASCE)0899-1561(2005)17:3(246)     Document Type: Article

References (65)

1. Acker, P. (1988). "Comportement mécanique du béton: apports de l'approche physico-chimique [Mechanical behavior of concrete: a physico-chemical approach]." Technical Report Res. Rep. LCPC 152, Laboratoires des Ponts et Chaussées, Paris (in French).
2. Acker, P. (2001). "Micromechanical analysis of creep and shrinkage mechanisms." Creep, shrinkage, and durability mechanics of concrete and other quasi-brittle materials - Proc., 6th Int. Conf. CONCREEP6♂IT, F.-J. Ulm, Z. Bažant, and F. Wittmann, eds. Elsevier, Amsterdam, 15-26.
3. Acker, P., and Ulm, F.-J. (2001). "Creep and shrinkage of concrete: Physical origins and practical measurements." Nucl. Eng. Des., 203, 148-158.
4. Aitcin, P.-C., Neville, A., and Acker, P. (1997). "Integrated view of shrinkage deformation." Concr. Int., 19(9), 35-41.
5. Anson, M., and Newman, K. (1966). "The effect of mix proportions and method of testing on Poisson's ratio for mortars and concretes." Mag. Concr. Res. 18(56), 115-130.
6. Bažant, Z. (1977). "Viscoelasticity of solidifying porous material - concrete." J. Eng. Mech. Div., 103(6), 1049-1067.
7. Bažant, Z. (1979). "Thermodynamics of solidifying or melting viscoelastic material." J. Eng. Mech. Div., 105(6), 933-952.
8. Bažant, Z., and Baweja, S. (1996). "Short form of creep and shrinkage prediction model B3 for structures of medium sensitivity." Mater. Struct., 29, 587-593.
9. Bažant, Z., Hauggard, A., Baweja, S., and Ulm, F.-J. (1997). "Microprestress-solidification theory for concrete creep. I: Aging and drying effects." J. Eng. Mech. 123(11), 1188-1194.
10. Bažant, Z., and Prasannan, S. (1989). "Solidification theory for concrete creep. I: Formulation." J. Eng. Mech., 115(8), 1691-1703.
11. Bentz, D. (1997). "Three-dimensional computer simulation of portland cement hydration and microstructure development." J. Am. Ceram. Soc., 80(1), 3-21.
12. Bernard, O., Ulm, F.-J., and Lemarchand, E. (2003). "A multiscale micromechanics-hydration model for the early-age elastic properties of cement-based materials." Cem. Concr. Res. 33, 1293-1309.
13. Bongers, J., and Rutten, H. (1998). "Concrete in multiaxial compression - a multilevel analysis." Heron, 43(3) 159-180.
14. Boumiz, A., Vernet, C., and Cohen Tenoudij, F. (1996). "Mechanical properties of cement pastes and mortars at early age." Adv. Cem. Based Mater. 3, 94-106.
15. Bye, G. (1999). Portland cement, 2nd Ed., Thomas Telford Publishing, London.
16. Byfors, J. (1980). "Plain concrete at early ages." Technical report, Swedish Cement and Concrete Research Institute, Stockholm, Sweden.
17. Constantinides, G., and Ulm, F.-J. (2003). "The effect of two types of C-S-H on the elasticity of cement-based materials: Results from nanoindentation and micromechanical modeling." Cem. Concr. Res. 34(1), 67-80,
18. Eichler, K. (1999). "Bindemittel- und Verfahrenstechnologie von modernem Spritzbeton [Binding agents and process technology of modern shotcrete]." Spritzbeton-Technologie 99, W. Kusterle, ed., Institut für Baustofflehre und Materialprüfung, Univ. of Innsbruck, Innsbruck, Austria, 195-202 (in German).
19. Eshelby, J. (1957). "The determination of the elastic field of an ellipsoidal inclusion, and related problems." Proc. R. Soc. London, Ser. A, 241, 376-396.
20. Fedorov, F. (1968). Theory of elastic waves in crystals, Plenum Press, New York.
21. Hashin, Z., and Monteiro, R (2002). "An inverse method to determine the elastic properties of the interface between the aggregate and the cement paste." Cem. Concr. Res. 32, 1291-1300.
22. Hellmich, C. (1999). "Shotcrete as part of the new Austrian tunneling method: From thermochemomechanical material modeling to structural analysis and safety assessment of tunnels." PhD thesis, Vienna Univ. of Technology, Vienna, Austria.
23. Hellmich, C., Lackner, R., and Mang, H. (2003). "Thermochemomechanical material model for shotcrete." Numerical simulation in tunneling, G. Beer, ed., Springer, Berlin, p. 61-82.
24. Hellmich, C., Macht, J., Lackner, R., Mang, H., and Ulm, F.-J. (2001a). "Phase transitions in shotcrete: from material modelling to structural safety assessment." Int. Conf. on Engineering Developments in Shotcrete, S. Bernard, ed., Hobart, Tasmania, Balkema, Rotterdam, 173-184.
25. Hellmich, C., Mang, H., and Ulm, F.-J. (1999a). "Hybrid method for quantification of stress states in shotcrete tunnel shells: Combination of 3D in-situ displacement measurements and thermochemoplastic material law." Proc., 1st European Conf. of Computational Mechanics, W. W Wunderlich, ed. (CD-ROM), Munich, Germany.
26. Hellmich, C., Mang, H., and Ulm, F.-J. (2001b). "Hybrid method for quantification of stress states in shotcrete tunnel shells: Combination of 3D in situ displacement measurements and thermochemoplastic material law." Comput. Struct. 79, 2103-2115.
27. Hellmich, C., and Ulm, F.-J. (2002). "Micromechanical model for ultra-structural stiffness of mineralized tissues." J. Eng. Mech. 128(8), 898-908.
28. Hellmich, C., Ulm, F.-J., and Mang, H. A. (1999b). "Consistent linearization in finite element analysis of coupled chemo-thermal problems with exo- or endothermal reactions." Comput. Mech. 24(4), 238-244.
29. Hellmich, C., Ulm, F.-J., and Mang, H. A. (1999c). "Multisurface chemoplasticity. I: Material model for shotcrete." J. Eng. Mech. 125(6), 692-701.
30. Huber, H. (1991). "Untersuchungen zum Verformungsverhalten von jungem Spritzbeton im Tunnelbau [Investigation of the deformation behavior of young shotcrete in tunneling]." Master's thesis, Univ. of Innsbruck, Innsbruck, Austria (in German).
31. Jennings, H., and Johnson, S. (1986). "Simulation of microstructure development during the hydration of a cement compound." J. Am. Ceram. Soc. 69(11), 790-795.
32. Lackner, R., Macht, J., Hellmich, C., and Mang, H. (2002). "Hybrid method for analysis of segmented shotcrete tunnel linings." J. Geotech. Geoenviron. Eng. 128(4), 298-308.
33. Lafarge CTEC. (2002). Lafarge Centre Technique Europe Central, internal report, commissioned by Institute for Strength of Materials, Vienna University of Technology.
34. Laplante, P. (1993). "Propriétés mécaniques des bétons durcissants: Analyse comparée des bétons classiques et à très hautes performances [Mechanical properties of hardening concrete: a comparative analysis of ordinary and high performance concretes]." PhD thesis, L'École Nationale des Ponts et Chaussées, Paris (in French).
35. Lechner, M., Hellmich, C., and Mang, H. (2001). "Short-term creep of shotcrete - thermochemoplastic material modelling and nonlinear analysis of a laboratory test and of a NATM excavation by the finite element method." Continuous and discontinuous modelling of cohesive-frictional materials, Lecture Notes in Physics, P. Vermeer, S. Diebels, W. Ehlers, H. Herrmann, S. Luding, and E. Ramm, eds., Vol. 568, Springer, Berlin, 47-62.
36. Lemarchand, E. (2001). "Contribution de la micromécanique à l'étude des phénomènes de transport et de couplage poromécanique dans les milieux poreux: Application aux phénomènes de gonflement des géomateriaux [Contribution of micromechanics to the study of transport and poromechanical coupling phenomena: Application to swelling phenomena in geomaterials]." PhD thesis, L'École Nationale des Ponts et Chaussées, Marne-la-Vallée, France (in French).
37. Lemarchand, E., and Dormieux, L. (2001). "A micromechanical approach to the modeling of swelling due to alkali-silica reaction." Proc., 14th Engineering Mechanics Conf., May 2000, CD-ROM, J. Tassoulas, ed., Austin, Tex.
38. Lemarchand, E., Ulm, F.-J., and Dormieux, L. (2002). "Effect of inclusions on friction coefficient of highly filled composite materials." J. Eng. Mech. 128(8), 876-884.
39. Li, G., Zhao, Y., and Pang, S.-S. (1999a). "Four-phase sphere modeling of effective bulk modulus of concrete." Cem. Concr. Res. 29, 839-845.
40. Li, G., Zhao, Y., Pang, S.-S., and Li, Y. (1999b). "Effective Young's modulus estimation of concrete." Cem. Concr. Res. 29, 1455-1462.
41. Macht, J., Lackner, R., Hellmich, C., and Mang, H. (2001). "Shotcrete creep properties - review of material tests and structural analyses of tunnels." Proc., 6th Int. Conf. on Creep, Shrinkage and Durability Mechanics of Concrete and Other Quasi-Brittle Materials, F.-J. Ulm, Z. Bažant, and F. Wittmann, eds., Cambridge, Mass., Elsevier Science Ltd., Amsterdam, 285-300.
42. Macht, J., Lackner, R., Hellmich, C., and Mang, H. (2003). "Quantification of stress states in shotcrete shells." Numerical simulation in tunneling, G. Beer, ed., Springer, Berlin, 225-248.
43. Mang, H., and Hofstetter, G. (2000). Festigkeitslehre [Strength of materials], Springer, Vienna (in German).
44. Mehlhorn, G., ed. (1996). Der Ingenieurbau: Grundwissen - Werkstoffe, Elastizitätstheorie [Basic knowledge in civil engineering: Materials and elasticity theory], Vol. 4, Ernst & Sohn, Berlin (in German).
45. Meschke, G. (1996). "Consideration of aging of shotcrete in the context of a 3D viscoplastic material model." Int. J. Numer. Methods Eng. 39, 3123-3143.
46. Nadeau, J. (2003). "A multiscale model for effective moduli of concrete incorporating ITZ water-cement ratio gradients, aggregate size distributions, and entrapped voids." Cem. Concr. Res. 33, 103-113.
47. Neubauer, C., Jennings, H., and Garboczi, E. (1996). "A three-phase model of the elastic and shrinkage properties of mortar." Adv. Cem. Based Mater., 4 6-20.
48. Nilsen, A., and Monteiro, P. (1993). "Concrete: A three-phase material." Cem. Concr. Res. 23(1), 147-151.
49. Pillar, N. (2002). "Determination of early age properties of fibre reinforced shotcrete to predict the cracking behavior." PhD thesis, submitted at Univ. of New South Wales, Sydney, Australia.
50. Rokahr, R., and Lux, K. (1987). "Einfluß des rheologischen Verhaltens des Spritzbetons auf den Ausbauwiderstand [Influence of the rheological behavior of shotcrete on the lining resistance]." Felsbau, 5, 11-18 (in German).
51. Rokahr, R., and Zachow, R. (1997). "Ein neues Verfahren zur täglichen Kontrolle der Auslastung einer Spritzbetonschale [A new method for the daily monitoring of the stress intensity of a sprayed concrete lining]." Felsbau—Rock and Soil Engineering, 15(6), 430-434 (in German).
52. Schubert, P. (1988). "Beitrag zum rheologischen Verhalten von Spritzbeton [Contribution to the rheological behavior of shotcrete]." Felsbau, 6, 150-153 (in German).
53. Schwefel, H. (1977). Numerische Optimierung von Computer-Modellen mittels der Evolutionsstrategie, [Numerical optimization of computer models by means of the evolution strategy] 1st Ed., Birkhäuser, Basel, Switzerland (in German).
54. Sercombe, J., Hellmich, C., Ulm, F.-J., and Mang, H. A. (2000). "Modeling of early-age creep of shotcrete. I: Model and model parameters." J. Eng. Mech. 126(3), 284-291.
55. Steindorfer, A., and Schubert, W. (1997). "Application of new methods of monitoring data analysis for short term prediction in tunnelling." Tunnels for people, Proc., World Tunnel Congress 1997, J. Golser, W. Hinkel, and W. Schubert, eds., Vol. 1, Vienna, Austria, Balkema, Rotterdam, 65-69.
56. Suquet, P., ed. (1997). Continuum micromechanics, Springer, Wien - New York.
57. Swoboda, G., Moussa, A., and Hafez, N. (1994). "Two and three dimensional modelling of layered shotcrete lining." Proc., Int. Conf. on Computational Methods in Structural and Geotechnical Engineering, P. Lee, L. Tham, and Y. Cheung, eds., Hong Kong, China Translation & Printing Services, 1077-1084.
58. Taylor, H. (1997). Cement chemistry, 2nd Ed., Thomas Telford Publishing, London.
59. Testor, M. (1995). "Trockenspritzbeton mit neuen Bindemitteln - Temperatureinfluss, Staubeinfluss und Rückprallreduktion [Dry-mix shotcrete with new cements - influence of temperature and of dust, reduction of rebound]." Master's thesis, University of Innsbruck, Innsbruck, Austria (in German).
60. Tijssens, M., Sluys, L., and van der Giessen, E. (2001). "Simulation of fracture of cementitious composites with explicit modeling of microstructural features." Eng. Fract. Mech., 68, 1245-1263.
61. Ulm, F.-J., and Coussy, O. (1995). "Modeling of thermochemomechanical couplings of concrete at early ages." J. Eng. Mech. 121(7), 785-794.
62. Ulm, F.-J., and Coussy, O. (1996). "Strength growth as chemo-plastic hardening in early age concrete." J. Eng. Mech. 122(12), 1123-1132.
63. Wesche, K. (1974). Baustoffe für tragende Bauteile [Building materials for structural components], 3rd Ed., Bauverlag, Wisbaden, Germany (in German).
64. Zaoui, A. (1997). "Structural morphology and constitutive behavior of microheterogeneous materials." Continuum micromechanics, P. Suquet, ed., Springer, Wien - New York, 291-347.
65. Zaoui, A. (2002). "Continuum micromechanics: Survey." J. Eng. Mech. 128(8), 808-816.