Dissimilar material joints with and without free-edge stress singularities: Part I. A biologically inspired design

Experimental Mechanics

Volumn 44, Issue 6, 2004, Pages 608-615

  Xu, L Roy ^a   Kuai, H ^a   Sengupta, S ^a  

^a VANDERBILT UNIVERSITY   (United States)

Author keywords

Bonding; Dissimilar materials; Interface; Photoelasticity; Stress singularities

Indexed keywords

ALUMINUM; BONDING; DISSIMILAR MATERIALS; INTERFACES (MATERIALS); PHOTOELASTICITY; POLYCARBONATES; POLYMETHYL METHACRYLATES; STRESSES; STRUCTURAL DESIGN; TENSILE STRENGTH;

BIOLOGICALLY INSPIRED DESIGN; DISSIMILAR MATERIAL JOINTS; FREE-EDGE STRESS SINGULARITIES;

JOINTS (STRUCTURAL COMPONENTS);

PHOTOELASTICITY;

EID: 20344368488     PISSN: 00144851     EISSN: None     Source Type: Journal    
DOI: 10.1177/0014485104049399     Document Type: Article

References (38)

1. Drzal, L.T., "Fiber Matrix Interphase Structure and Its Effect on Adhesion and Composite Mechanical Properties," Controlling Interphases in Composite Materials, H. Ishida, editor, Elsevier, Amsterdam, 309-319 (1990).
2. Gupta, V., Yuan, J., and Pronin, A., "Recent Developments in the Laser Spallation Technique to Measure the Interface Strength and Its Relationship to Interface Toughness with Applications to Metal/Ceramic, Ceramic/Ceramic and Ceramic/Polymer Interfaces," Journal of Adhesion Science and Technology, 8, 713-747 (1994).
3. Lara-Curzio, E., Ferber M.K., Besmann, T.M., Rebillat, F., and Lamon, J., "Fiber-matrix Bond Strength, Fiber Frictional Sliding and the Macroscopic Tensile Behavior of a 2D SiC/SiC Composite with Tailored Interfaces," Ceramics Engineering and Science, 15, 597-612 (1995).
4. Rabin, B.H., Williamson, R.L., Bruck, H.A., Wang, X-L., Watkins, T.R., Feng, Y-Z., and Clarke, D.R., "Residual Strains in an A1203-Ni Joint Bonded With a Composite Interlayer: Experimental Measurements and FEM Analyses," Journal of American Ceramics Society, 81, 1541-1549 (1998).
5. Lin, G., Geubelle, P.H., and Sottos, N.R., "Simulation of Fiber Debonding With Friction in a Model Composite Push-out Test," International Journal of Solids and Structures, 38, 8547-8562 (2001).
6. Zhou, X-F., Wagner, H.D., and Nutt, S.R., "Interfacial Properties of Polymer Composites Measured by Push-out and Fragmentation Tests," Composites Part A, 32, 1543-1551 (2001).
7. Xu, L.R. and Rosakis, A.J., "Impact Failure Characteristics in Sandwich Structures: Part II. Effects of Impact Speed and Interfacial Strength," International Journal of Solids and Structures, 39, 4237-4248 (2002).
8. Hutchinson, J.W. and Suo, Z., "Mixed-mode Cracking in Layered Materials," Advances in Applied Mechanics, 29, 63-191 (1992).
9. Needleman, A. and Rosakis, A.J., "The Effect of Bond Strength and Loading Rate on the Conditions Governing the Attainment of Intersonic Crack Growth Along Interfaces," Journal of Mechanics and Physics of Solids, 47, 2411-2449 (1999).
10. Xu, L.R., Huang, Y.Y., and Rosakis, A.J., "Dynamic Crack Deflection and Penetration at Interfaces in Homogeneous Materials: Experimental Studies and Model Predictions," Journal of Mechanics and Physics of Solids, 51, 461-486 (2003).
11. Thostenson, E.T, Li, W., Wang, D., Ren, Z., and Chou, T., "Interfacial Characterization of Carbon Nanotube-modified Graphite Fiber Composites," Proceedings of the 16th American Society of Composites Technical Conference, Blacksburg, VA, CRC Press, Boca Raton (2001).
12. Xu, L.R., Bhamidipati, V., Zhong, W-H., Li, J., Lukehart, C.M., Lara-Curzio, E., Liu, K.C., and Lance, M.J., "Mechanical Property Characterization of a Polymeric Nanocomposite Reinforced by Graphitic Nanofibers With Reactive Linkers," Journal of Composite Materials, 38, 1563-1582 (2004).
13. Reedy, E.D. Jr and Guess, T.R., "Comparison of Butt Tensile Strength Data with Interface Corner Stress Intensity Factor Prediction," International Journal of Solids and Structures, 30, 2929-2936 (1993).
14. Tandon, G.P., Kim, R.Y., Warrier, S.G., and Majumdar, B.S., "Influence of Free Edge and Corner Singularities on Interfacial Normal Strength: Application in Model Unidirectional Composites," Composites, Part B: Engineering, 30, 115-134 (1999).
15. Akisanya, A.R. and Fleck, N.A., "Interfacial Cracking from the Free Edge of a Long Bi-material Strip," International Journal of Solids and Structures, 34, 1645-1665 (1997).
16. Swadener, J.G., Liechti, K.M., and de Lozanne, A.L., "The Intrinsic Toughness and Adhesion of a Glass Epoxy Interface," Journal of the Mechanics and Physics of Solids, 47, 223-258 (1999).
17. Pelegri, A.A., Kardomateas, G.A., and Malik, B.U., "The Fatigue Growth of Internal Delaminations Under Compressive Loading in Cross Ply Composite Plates," Composite Materials: Fatigue and Fracture, ASTM STP 1285, E.A. Armanios, editor, 146 163 (1997).
18. Bruck, H.A., Evans, J.J., and Peterson, M.L., "The Role of Mechanics in Biological and Biologically Inspired Materials," EXPERIMENTAL MECHANICS, 42, 361-371 (2002).
19. Xu, L.R., Rosakis, A.J., and Samudrala, O., "Measurements of Adhesive Tensile and Shear Strengths With the Aid of Two Optical Techniques," Proceedings of the Society of Experimental Mechanics Annual Conference, San Diego, CA (2002).
20. Tippur, H.V., Krishnaswamy, S., and Rosakis, A.J., "A Coherent Gradient Sensor for Crack Tip Deformation Measurements: Analysis and Experimental Results," International Journal of Fracture, 48, 193-204 (1991).
21. Williams, M.L., "Stress Singularities Resulting From Various Boundary Conditions in Angular Corners of Plates in Extension," Journal of Applied Mechanics, 19, 526-528 (1952).
22. Bogy, D.B., "Two Edge-bonded Elastic Wedges of Different Materials and Wedge Angles Under Surface Tractions," Journal of Applied Mechanics, 38, 377-386 (1971).
23. Hein, V.L. and Erdogan, F., "Stress Singularities in a Two-material Wedge," International Journal of Fracture Mechanics, 7, 317-330 (1971).
24. Munz, D. and Yang, Y.Y., "Stresses Near the Edge of Bonded Dissimilar Materials Described by Two Stress Intensity Factors," International Journal of Fracture, 60, 169-177 (1993).
25. Pageau, S.S., Gadi, K.S., Biggers, S.B., and Joseph, P.F., "Standardized Complex and Logarithmic Eigensolutions for n-material Wedges and Junctions," International Journal of Fracture, 77, 51-76 (1996).
26. Akisanya, A.R. and Meng, C.S., "Initiation of Fracture at the Interface Corner of Bi-material Joints," Journal of the Mechanics and Physics of Solids, 51, 27-46 (2003).
27. Klingbeil, N.W and Beuth, J.L., "On the Design of Debond-resistant Bi-materials, Part I. Free-edge Singularity Approach," Engineering Fracture Mechanics, 66, 93-110 (2000).
28. Labossiere, P.E.W., Dunn, M.L., and Cunningham, S.J., "Application of Bi-material Interface Corner Failure Mechanics to Silicon/Glass Anodic Bonds," Journal of the Mechanics and Physics of Solids, 50, 405-433 (2002).
29. Dundurs, J., "Discussion of Edge-bonded Dissimilar Orthogonal Elastic Wedges Under Normal and Shear Loading by Bogy D.B.," ASME Journal of Applied Mechanics, 36, 650-652 (1969).
30. Mattheck, C., Design in Nature: Learning from Trees, Springer-Verlag, New York (1998).
31. Mohammed, I. and Liechti, K.M., "The Effect of Corner Angles in Bi-material Structures," International Journal of Solids and Structures, 38, 4375-4394 (2001).
32. Xu, L.R. and Sengupta, S. "Dissimilar Material Joints With and Without Free-edge Stress Singularities: Part II. An Integrated Numerical Analysis," EXPERIMENTAL MECHANICS, 44 (6), 616-621 (2004).
33. Kobayashi, A.S., editor, Handbook on Experimental Mechanics, Society for Experimental Mechanics, Prentice-Hall, Englewood Cliffs, NJ (1987).
34. Rice, J.R., "Elastic Fracture Mechanics Concepts for Interfacial Cracks," Journal of Applied Mechanics, 55, 98-103 (1988).
35. Xu, L.R., Sengupta, S., and Kuai, H., "An Experimental and Numerical Investigation on Adhesive Bonding Strengths of Polymer Materials," International Journal of Adhesion and Adhesives, 24, 455-460 (2004).
36. Bruck, H.A., Fowler, G., Gupta, S.K., and Valentine, T.M., "Using Geometric Complexity to Enhance the Interfacial Strength of Heterogeneous Structures Fabricated in a Multi-stage, Muli-piece Molding Process," EXPERIMENTAL MECHANICS, 44, 261-271 (2004).
37. Roychowdhury, S., Roy, Y., and Dodds, R.H. Jr, "Ductile Tearing in Thin Aluminum Panels: Experiments and Analyses Using Large-displacement, 3-D Surface Cohesive Elements," Engineering Fracture Mechanics, 69, 983-1002 (2002).
38. Li, Z., Bi, X., Lambros, J., and Geubelle, P.H., "Dynamic Fiber Debonding and Frictional Push-out in Model Composite Systems: Experimental Observations," EXPERIMENTAL MECHANICS, 42, 417-425 (2002).