Review of thermal joint resistance models for non-conforming rough surfaces in a vacuum

Proceedings of the ASME Summer Heat Transfer Conference

Volumn 2003, Issue , 2003, Pages 411-431

  Bahrami, M ^a   Culham, J R ^a   Yovanovich, M M ^a   Schneider, G E ^a  

^a UNIVERSITY OF WATERLOO   (Canada)

Author keywords

[No Author keywords available]

Indexed keywords

ELASTIC MODULI; HEAT FLUX; HEAT RESISTANCE; HEAT TRANSFER; MICROHARDNESS; POISSON RATIO; PROBABILITY DISTRIBUTIONS; PROBLEM SOLVING; SURFACE ROUGHNESS; THERMAL CONDUCTIVITY; THERMOANALYSIS; VACUUM;

PLASTICITY INDEX; THERMAL CONTACT RESISTANCE (TCR);

JOINTS (STRUCTURAL COMPONENTS);

EID: 1842741096     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1115/ht2003-47051     Document Type: Conference Paper

References (63)

1. Greenwood, J. A. and Williamson, B. P., 1966, "Contact of Nominally Flat Surfaces," Proc., Roy. Soc., London A295, pp. 300-319.
2. Tabor, D., 1952, The Hardness of Metals, Oxford, London.
3. Clausing, A. M. and Chao, B.T., 1963, "Thermal Contact Resistance in a Vacuum Environment," University of Illinois, Urbana, Illinois, Report ME-TN-242-1, August.
4. Mikic, B. B., Rohsenow, W. M., 1966, "Thermal Contact Conductance," Technical Report No. 4542-41, Dept. of Mech. Eng. MIT, Cambridge, Massachusetts, NASA Contract No. NCR 22-009-065, September.
5. Yovanovich, M. M., 1969, "Overall Constriction Resistance Between Contacting Rough. Wavy Surfaces," Int. J. Heat Mass Transfer 12, pp. 1517-1520.
6. Madhusudana, C. V. and Fletcher, L. S., 1981, "Thermal Contact Conductance: A Review of Recent Literature," Mech. Eng. Dept. Texas A&M University, September.
7. Johnson, K. L., 1985, Contact Mechanics, Cambridge University Press, Cambridge.
8. Liu, G., Wang, Q. and Lin, C., 1999, "A Survey of Current Models for Simulating the Contact Between Rough Surfaces," Tribology Trans., Vol. 42, 3, pp. 581-591.
9. ANSI B46.1-1985, American National Standards Institute/American Society of Mechanical Engineers, 1985, Surface Texture: Surface Roughness, Waviness and Lay, March.
10. Ling, F. F., 1958, "On Asperity Distributions of Metallic Surfaces," Journal of Applied Physics, Vol. 29, No.8.
11. Tanner, L. H. and Fahoum, M., 1976, "A Study of The Surface Parameters of Ground and Lapped Metal Surfaces, Using Specular and Diffuse Reflection of Laser Light," Wear, 36, pp. 299-316.
12. Antonetti, V. W., Whittle, T. D. and Simons, R. E., 1991, "An Approximate Thermal Contact Conductance Correlation," ASME, The 28th National Heat Transfer Conference Minneapolis, Minnesota, HTD-Vol. 170, Experimental/ Numerical Heat Transfer in Combustion and Phase Change, pp. 35-42.
13. Lambert, M. A., 1995, "Thermal Contact Conductance of Spherical, Rough Metals," Ph.D. Thesis, Dept. of Mech. Eng., Texas A&M University, USA.
14. Francois, R. V., 2001, "Statistical Analysis of Asperities on a Rough Surface," Wear 249, pp. 401-408.
15. Williamson, J. B. P., Pulten, J. and Hunt, R. T., 1969, "The Shape of Solid Surfaces," Surface Mechanics, ASME, New York, pp. 24-35.
16. Greenwood, J. A., 1967, "The Area of Contact Between Rough Surfaces and Flats," Journal of Lubrication Tech., Jan. 1967, pp. 81-91
17. Bendat, J. S., 1958, Principal and Applications of Random Noise Theory, Wiley, New York.
18. Cooper, M. G., Mikic, B. B. and Yovanovich, M. M., 1969, "Thermal Contact Conductance," Int. J. Heat Mass Transfer, Vol.12, pp. 279-300.
19. Francis, H. A., 1977, "Application of Spherical Indentation Mechanics To Reversible and Irreversible Contact Between Rough Surfaces," Wear, 45, pp. 221-269.
20. Clausing, A. M. and Chao, B. T., 1965, "Thermal Contact Resistance in a Vacuum Environment," Paper No.64-HT-16, Transactions of ASME: Journal of Heat Transfer, Vol. 87, Nov. pp. 243-251.
21. Nishino, K., Yamashita, S. and Torii, K., 1995, "Thermal Contact Conductance Under Low Applied Load in a Vacuum Environment," Experimental Thermal and Fluid Science, Elsevier, New York, 10, pp. 258-271.
22. Lambert, M. A. and Fletcher, L. S., (1997), "Thermal Contact Conductance of Spherical Rough Metals," Transactions of ASME, Vol.119, Nov., pp. 684-690.
23. Mott, M. A., 1956, Micro-Indentation Hardness Testing, Butterworths Scientific Publications, London.
24. Hegazy, A. A., 1985, "Thermal Joint Conductance of Conforming Rough Surfaces: Effect of Surface Micro-Hardness Variation," Ph.D. Thesis, Dept. of Mech. Eng., University of Waterloo, Waterloo, Canada.
25. Song, S. and Yovanovich, M. M., 1988, "Relative Contact Pressure: Dependence on Surface Roughness and Vickers Microhardness," AIAA Journal of Thermophysics and Heat Transfer, Vol. 2, No. 1, pp. 43-47.
26. Sridhar, M. R., 1994, "Elastoplastic Contact Models For Sphere-Flat and Conforming Rough Surface Applications," Ph.D. Thesis, Dept. of Mech. Eng., University of Waterloo, Waterloo, Canada.
27. Hertz H., 1881, "On the Contact of Elastic Bodies," Journal fur die reine und angewandie Mathematic, Vol. 92,p. 156-171 (In German).
28. Hardy, C., Baronet, C. N. and Tordion, G. V., 1971, "Elastoplastic Indentation of a Half-space by a Rigid Sphere," Journal of Numerical Methods in Engineering, 3, 451.
29. Abott, E. J. and Firestone, F. A., 1933, "Specifying Surface Quality," Mechanical Engineering (ASME), 55, 569.
30. Bowden, F. P. and Tabor, D., 1951, Friction and Lubrication of Solids, Oxford University Press, UK.
31. Holm, R., 1958, Electrical Contacts 3rd Ed, Springer Verlag, Berlin.
32. Pullen, J. and Williamson, J. B. P., 1972, "On the Plastic Contact of Rough Surfaces," Roy. Soc. London A.327, 159-173.
33. Tsukizoe, T. and Hisakado, T., 1965, "On the Mechanism of Contact Between Metal Surfaces- The Penetrating Depth and the Average Clearance," Journal of Basic Eng., Vol. 87, No. 3, pp. 666-674.
34. Tsukizoe, T. and Hisakado, T., 1968, "On the Mechanism of Contact Between Metal Surfaces: Part 2- The Real Area and the Number of the Contact Points," Journal of Lubrication Tech., Vol. 40, No.1, pp. 81-88.
35. Archard, J. F., 1953, "Contact and Rubbing of Flat Surfaces," Journal of Applied Physics, Vol. 24, pp. 981.
36. Greenwood, J. A. and Tripp, J. H., 1967, "The Elastic Contact of Rough Spheres," Transactions of the ASME: Journal of Applied Mechanics, Vol. 89, No.1, pp. 153-159.
37. Whitehouse, D. J. and Archard, J. F., 1970, "The Properties of Random Surfaces of Significance in Their Contact," Proc. Roy. Soc. London, A316, 97-121.
38. Bush, A. W., Gibson, R. D. and Keogh, G. P., 1979, "Strongly Anistropic Rough Surfaces," ASME Journal of Lubrication Tech., Vol. 101, pp. 15-20.
39. Onions, R. A. and Archard, J. F., 1973, "The Contact of Surfaces Having a Random Structure," Journal of Physics D., 6, pp. 289-304.
40. Bush, A.W., Gibson, R. D. and Thomas, T. R., 1975, "The Elastic Contact of a Rough Surface," Wear, 35, pp. 87-111.
41. O'Callaghan, M. and Cameron, M. A., 1976, "Static Contact Under Load Between Nominal Flat Surfaces in Which Deformation Is Purely Elastic," Wear, Vol. 36, pp.79-97.
42. McCool, J. I., 1986, "Comparison of Models for the Contact of Rough Surfaces," Wear, Vol. 107, pp. 37-60.
43. Chang, W. R., Etsion, I. and Bogy, D. B., 1987, "An Elastic-Plastic Model for the Contact of Rough Surfaces," J. Tribology, Vol. 109, pp. 257-253.
44. Zhao, Y., Maietta, D.M. and Chang, L., 2000, "An Asperity Microcontact Model Incorporating the Transition From Elastic Deformation to Fully Plastic Flow" Trans. of ASME, Vol.122, Jan. 2000, pp. 86-93.
45. Mikic, B. B., 1974, "Thermal Contact Conductance: Theoretical Considerations," Int. J. of Heat and Mass Transfer, Vol. 17, 205.
46. Tsukada, T. and Anno, Y., 1979, "On the Approach Between a Sphere and a Rough Surface (1st. Report-Analysis of Contact Radius and Interface Pressure," (in Japanese), Journal of the Japanese Society of Precision Engineering, Vol. 45, No. 4, pp. 473-479.
47. Sasajima, K. and Tsukada, T., 1981, "On the Approach Between a Sphere and a Rough Surface (2nd. Report- Critical Condition to Yield Plastic Deformation in Contacting Bodies," (in Japanese), Journal of the Japanese Society of Precision Engineering, Vol. 47, No. 6, pp. 694-699.
48. Burde, S. S., 1977, "Thermal Contact Resistance Between Smooth Spheres and Rough Flats," Ph.D. Thesis, Dept. of Mech. Eng., University of Waterloo, Waterloo, Canada.
49. Yovanovich M. M., Burde, S. S. and Thompson, C. C., 1976, "Thermal Constriction Resistance of Arbitrary Planar Contacts With Constant Flux," presented at AIAA 11th Thermophysics Conference, San Diego, California, July 14-16, Paper No. 76-440, pp. 127-139.
50. Carslaw, H. S. and Jaeger, J. C., 1959, Conduction of Heat in Solids, 2nd Edition. Oxford Press., London.
51. Yovanovich, M. M., 1976, "Thermal Constriction Resistance of Contacts on a Half-Space: Integral Formulation," AIAA Progress in Astronautics and Aeronautics. Radiative Transfer and Thermal Control, Vol. 49, AIAA NY, pp. 397-418.
52. Roess, L. C., 1950, "Theory of Spreading Conductance," Beacon Laboratories of Texas, Beacon, NY, Appendix A (Unpublished paper).
53. Sridhar, M. and Yovanovich, M. M., 1993, "Critical Review of Elastic and Plastic Thermal Conductance Models and Comparison With Experiment," Paper No. AIAA 93-2776, presented at the AIAA 28th Thermophysics Conference, Orlando, Florida, July6-9.
54. Yovanovich, M. M., 1982, "Thermal Contact Correlations," in Horton, T.E. (editor), Progress in Aeronautics and Aerodynamics: Spacecraft Radiative Transfer and Temperature Control, Vol. 83, pp. 83-95.
55. Kitscha, W., 1982, "Thermal Resistance of the SphereFlat Contact," M-A.Sc. Thesis, Dept. of Mech. Eng., University of Waterloo, Waterloo, Canada.
56. Fisher, N. J., 1985, "Analytical and Experimental Studies of the Thermal Contact Resistance of Sphere/Layered Flat Contacts," MA.Sc. Thesis, Dept. of Mech. Eng., University of Waterloo, Waterloo, Canada.
57. Mikic, B. B., 1970, "Thermal Constriction Resistance Due to Non-Uniform Surface Conditions; Contact Resistance at Non-Uniform Interface Pressure," Int. J. of Heat and Mass Transfer, Vol.13, pp. 1497-1500.
58. Yovanovich, M. M., 1986, "Recent Developments In Thermal Contact, Gap and Joint Conductance Theories and Experiment," Delivered at the Eight International Heat Transfer Conference, San Francisco, CA, August 17-22, pp. 35-45.
59. Antonetti, V. W., 1983, "On the Use of Metallic Coating to Enhance Thermal Contact Conductance," Ph.D. Thesis, Dept. of Mech. Eng., University of Waterloo, Waterloo, Canada.
60. Milanez, F. H., Yovanovich, M. M., and Mantelli, M. B. H., 2003, "Thermal Contact Conductance at Low Contact Pressures," to be presented at the 36th AIAA Thermophysics Conference, June 23-26, Orlando, FL.
61. Gibson, R. D., 1976, "The Contact Resistance of a Semi-Infinite Cylinder in a Vacuum," Applied Energy, Vol.2, pp. 57-65.
62. Negus, K. J. and Yovanovich, M. M., 1984, "Application of the Method of Optimized Images to the Steady Three Dimensional Conduction Problems," ASME 84-WA/HT-110.
63. McMillan, R. Jr. and Mikic, B. B., 1970, "Thermal Contact Resistance With Non-Uniform Interface Pressures," Technical Report No. DSR 72105-70, Dept. Of Mech. Eng. MIT, Cambridge, Massachusetts, NASA Contract No. NCR 22-009-(477), November.