Automated manufacturabilty analysis for injection-molded and die-cast parts

Proceedings of the ASME Design Engineering Technical Conference

Volumn 3, Issue , 2003, Pages 205-226

  McAdams, Daniel A ^a   Bidkar, Rahul A ^a  

^a Architectural and Environmental Engineering   (United States)

Author keywords

Automated Manufacturability Analysis; Design for Manufacturing; Die Casting; Feature Recognition; Injection Molding

Indexed keywords

ALGORITHMS; AUTOMATION; COMPUTER AIDED DESIGN; COMPUTER SIMULATION; COMPUTER SOFTWARE; DIE CASTING; INJECTION MOLDING; OBJECT ORIENTED PROGRAMMING; PATTERN RECOGNITION; THREE DIMENSIONAL COMPUTER GRAPHICS; C++ (PROGRAMMING LANGUAGE); DIES;

AUTOMATED MANUFACTURABILITY ANALYSIS; DESIGN FOR MANUFACTURING (DFM); FEATURE RECOGNITION;

COMPUTER AIDED MANUFACTURING; INJECTION MOLDING;

AUTOMATED MANUFACTURABILITY ANALYSIS; CAST PART; DESIGN FOR MANUFACTURING; DIE-CAST; FEATURES RECOGNITION; INJECTION MOULDED; MANUFACTURABILITY; MATHEMATICAL ALGORITHMS; MATHEMATICAL FRAMEWORKS; NUMERICAL ALGORITHMS;

EID: 1842709295     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: None     Document Type: Conference Paper

References (35)

1. Dastidar, P. G., A knowledge-based manufacturing advisory system for the economical design of metal stampings, PhD dissertation, University of Massachusetts Amherst, 1991.
2. Dixon, J. R. and Poli, C., Engineering Design and Design for Manufacturing, Field Stone Publishers, 1995.
3. Gadh, R., Feature mapping and feature recognition in geometric design generation, In Jami Shah, Martti Mäntylä and Dana S. Nau, editors, Advances in Feature based Manufacturing, chapter 6, pp. 107-128, Elsevier publishers, 1994.
4. Gadh, R. and Prinz, F. B., Recognition of geometric forms using the differential depth filter, Computer Aided Design, Butterworth-Heinemann publishers, 24 (11), pp. 583-598, 1992.
5. Gupta, S. K., Regli, W. C., Nau, D. S., and Zhang, G., A methodology for systematic generation and evaluation of alternative operation plans, In Jami Shah, Martti Mäntylä and Dana S. Nau, editors, Advances in Feature based Manufacturing, chapter 8, pp. 161-184, Elsevier publishers, 1994.
6. Gupta, S. K. and Nau, D. S., A systematic approach for analyzing the manufacturability of machined parts, Computer Aided Design, 1995.
7. Gupta, S. K., Regli, W. C., Das, D., and Nau, D. S., Automated Manufacturability Analysis: A Survey, Research in Engineering Design, Vol. 9, No. 3, pp. 168-190, 1997.
8. Henderson, M. R., Extraction of feature information from three-dimensional CAD data, PhD dissertation, Purdue University, 1984.
9. Henderson, M. R., Srinath, G., Stage, R., Walker, K. and Regli, W., Boundary Representation-based Feature Identification, In Jami Shah, Martti Mäntylä and Dana S. Nau, editors, Advances in Feature based Manufacturing, chapter 2, pp. 15-38, Elsevier publishers, 1994.
10. Joshi, S. and Chang, T. C., Graph based heuristics for recognition of machined features from a 3D solid model, Computer Aided Design, 20 (2), pp. 58-66, 1988.
11. J. W. Van Vliet C. A. Van Luttervelt and H. J. J. Kals, State Of the Art report on Design for Manufacturing, Paper DETC99/DFM-8970. Proc. of Design Engineering Technical Conference, ASME, 1999.
12. Kramer, T. R., Nau, D. S., Gupta, S. K., Regli, W. and Zhang, G., Development of Machining Alternatives, Based on MRSEVs, Proc. of the ASME Computers in Engineering Conference, 1993.
13. Kyprianou, L., Shape classification in Computer Aided Design, PhD dissertation, Cambridge, UK, 1980.
14. Lei, S. and Qamhiyah, A., Wavelet-based surface analysis for form feature extraction, DETC2000/DFM-14023, Proc. of Design for Manufacturing Conf. ASME, 2000.
15. Mill, F.G., Naish, J.C. and Salmon, J.C., Design for machining with a simultaneous-engineering workstation, Computer Aided Design, pp. 521-527, 1994.
16. Mortenson, M., Geometric modeling, Wiley, 1985.
17. Poli, C., Escudero, J. and Fernandez, R., How Part Design Affects Injection Molding Tool Costs, Machine Design, 1988.
18. Poli, C., Fredette, L. and Sunderland, J. E., Trimming the cost of die-castings, Machine Design, 1990.
19. Poli, C., Design for Manufacturing: A Structured Approach, Butterworth Heinemann, Boston, 2001.
20. Prabhakar, S., An experiment on the use of neural nets in form feature recognition, Master's thesis, Arizona State University, 1990.
21. Priest, J. W. and Sanchez, J. M., An empirical methodology for measuring producibility early in product development., International Journal of Computer Integrated Manufacturing, 4(2),pp. 114-120, 1991.
22. Regli, W. and Nau, D. S., Building a general approach to feature recognition of material removal shape element volumes (MRSEVs), Second Symposium on Solid Modeling Foundations and CAD/CAM Applications, 1993.
23. Regli, W., Gupta, S. K. and Nau, D. S., Feature recognition for manufacturability analysis, ASME Computers in Engineering Conference, pp. 93-104, 1994.
24. Regli, W., Geometric Algorithms for the Recognition of Features from Solid Models, Ph.D. dissertation, University of Maryland, 1995.
25. Requicha, A. A. G. and Han, J., Feature recognition from CAD models, IEEE Computer Graphics, 1998.
26. Sakurai, H. and Gossard, D. C., Shape Feature Recognition from 3D solid models, ASME Computers in Engineering, 1988.
27. Shah, J., Mäntylä, M. and Nau, D. S., editors, Advances in Feature based Manufacturing, chapter 1, pp. 1-11, Elsevier publishers, 1994.
28. Shah, J. and Mäntylä, M., Parametric and Feature-Based CAD/CAM: Concepts, techniques and applications, Wiley-Interscience Publication, 1995.
29. Trucks, H. E., Designing for Economical Production, Society of Manufacturing Engineers, MI, 1987.
30. UniGraphics Solutions Inc., V18.0 UniGraphics Help, 2001.
31. Vandenbrande, J., Automatic recognition of machinable features in solid models, PhD dissertation, University of Southern California, 1990.
32. Vandenbrande, J. H. and Requicha, A. A. G., Spatial reasoning for the automatic recognition of machinable features in solid models, IEEE Pattern Analysis and Machine Intelligence, vol. 15, no. 12, pp. 1269-1285, 1993.
33. Woo, T., Feature recognition by volume decomposition, Proc. of Conference CAD/CAM technology in Mechanical Engineering, Cambridge, MA, 1982.
34. Yong Se Kim, Volumetric feature recognition using convex decomposition, In Jami Shah, Martti Mäntylä and Dana S. Nau, editors, Advances in Feature based Manufacturing, chapter 3, pp. 39-63, Elsevier publishers, 1994.
35. Zeid, I., CAD/CAM Theory and Practice, McGraw-Hill, 1991.