State-of-the-art report on design for manufacturing

Proceedings of the ASME Design Engineering Technical Conference

Volumn 4, Issue , 1999, Pages 243-254

  Van Vliet, J W ^a   Van Luttervelt, C A ^b   Kais, H J J ^b  

^a Delft University of Technology ^*  (Netherlands)

^b DELFT UNIVERSITY OF TECHNOLOGY   (Netherlands)

Author keywords

[No Author keywords available]

Indexed keywords

MANUFACTURE; PRODUCT DESIGN;

DESIGN FOR MANUFACTURING; LITERATURE STUDIES; MANUFACTURABILITY; PRODUCT REALISATION; STATE OF THE ART;

DESIGN FOR MANUFACTURABILITY;

EID: 85076277538     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1115/DETC99/DFM-8970     Document Type: Conference Paper

References (77)

1. Andersson, K. Makkonen. P. Persson, J.G. 1995. .4 proposal to a product modelling language to support conceptual design, Annals of the CIRP Vol. 44/1/1995, p.p. 129-132.
2. Andreasen, M.M. 1992, Design in a 'Designer's workbench' (DIVB), Proceedings of the 9" WDK Workshop, Rigi.
3. Arimoto. S. Ohashi. T. Ikeda. M. Miyakawa, S. 1993, Jan. 15, Development of .Machining-producibility' Evaluation Method (MEM), Annals of the CIRP Vol. 42/1/1993, p.p. 119-122, Prod. Eng. Research Laboratory Hitachi, Japan.
4. Ashby, M.F. 1992, Material selection in mechanical design, Pergamon. Oxford 1992.
5. ASM 1990, Alat .D B User's Manual, American Society of Metals International, Cleveland, Ohio.
6. Bakerjian, R. 1992. Tool and Manuf. Engineers handbook, vol. 6: Design for Manufaclurabilit\\ ISBN 0-87263-402-7 Dearborn; Society of Manufacturing Engineers, 1992.
7. Barton, R. R. Joo, Y. Ham, 1. 1996, Feedback of Manufacturing Experience for DFM Rules, Annals of the CIRP Vol. 45/1/1996, pp. 115-119, The Pennsylvania State University, USA.
8. Begelinger, R. 1998, Computer support in the Design of Product families. ISBN 90 365 11 976, Ph.D. thesis. University of fwente.
9. Boothroyd, G. Dewhurst, P. Knight. W. 1994, Product design for Manufacture and Assembly, ISBN 0-8247-9176-2, Dekker. New-York 1994.
10. Borg. J. MacCallum, K.J. 1995, A HyperCAD Expert System for Plastic Product design, Proceedings of the 3rd International Conference in Computer Integrated Manufacturing, vol.l ISBN 981-02-2973-9, p.p. 295-302.
11. Burnell, L. J. Priest. J. W. Briggs, K. 1991. An intelligent decision theoretic approach to producibility optimisation in conceptual design. Journal of Intelligent Manufacturing (1991) 2 pp. 189-196, University of Texas at Arlington.
12. Colton, J.S. Ouellette, M.P. 1994, A form verification system for the conceptual design of complex mechanical systems. Engineering with Computers (1994)10, p.p. 33-44. Georgia Institute of Technology. Atlanta, USA.
13. Colton, J.S. Pun. R. C. 1994. Information frameworks for conceptual engineering design.
14. Computers (1994) 10, p.p. 22-32, Georgia Institute of Technology, Atlanta. Georgia, USA.
15. Corbett. J. Dooner, M. et al. 1991, Design for Manufacture, strategies, principles and technicpies, ISBN 0-201-41694-8, Wokingham : Addison-Wesley, 1991.
16. Edwards, K. Murdoch, T. 1993, Modelling engineering design principles. Proc. International conference on engineering design ICED 1993 'fhe Flague. p.p. 1676-1683.
17. El-Mehalawi, M. Miller, R.A. 1998, A case-based approach for cost estimating in net-shape manufacturing. Transactions of the North American manufacturing research institution of SME (Society of Manufacturing Engineers). vol.XXVI 1998. p.p. 37-42, Ohio.
18. Esawi, A. M. K. Ashby, M. F. 1997, Computer-based selection of Manufacturing Processes, Cambridge University-Eng. department. Report No. TR50, May 1997.
19. Fan-is, J. Knight, W.A. 1992, Jan. 15, Design for Manufacture: Expert Processing Sequence Selection for early Product Design, Annals of the CIRP Vol 41/1/1992, p.p. 481-484.
20. Gao, J.X. Huang, X.X. 1996, Product and manufacturing capability modelling in an Integrated CAD/Process planning environment, Int. Journal of advanced manufacturing technology 1996; 11, p.p. 43-51.
21. Gopalakrishnan, B. Pandiarajan, V. 1991, Materials and Manufacturing Processes Selection Systems for Product Designs in Concurrent Engineering, Journal of Materials Processing Technology, 28 (1991), p.p. 93-103.
22. Grace, D.R.; Billatos, S.B. 1992, Application of concurrent engineering in the redesign process. Proc, of ASME 1992 Design for Manufacture DE Vol 51, p.p. 23-28.
23. Giinasekera, J.S.; Fischer, C.E.; Maias, W.M et al. 1996, The development of process models for use within global optimisation of a manufacturing system. Proc, of ASME international Engineering Congress, Atlanta GA Nov. 17th.
24. Gupta, S.K. Regli, W.C. Nau, D.S. 1994, Integrating DFM with CAD through Design Critiquing, ConcuiTent engineering: Research and applications 1994, 2, p.p. 85-95, University of Maryland, USA.
25. Gupta, S. K. Regli, W. C. Das, D. Automated manufacturability analysis: A survey, ISR-TR-95-14, Pittsburgh.
26. Hamer, P. van den, Lepoeter, K. 1996, Managing design data: The five dimensions of CAD frameworks, configuration management, and product data management. Proceedings of the IEEE, vol. 84 no. 1 jan.96, p.p. 42-56.
27. Hashim, F.M. Pennington, A. de 1994, A functional appraoch to redesign. Engineering with computers 1994 10, p.p. 125-139, University of Leeds, UK.
28. Hayes, Caroline, C.; Gaines, D.M. 1996, Using near-misses from feature recognition to generate redesign suggestions for increased manufacturability. Proc. ASME 1996 Design for Manufacturing and Assembly, DE vol 89, p.p. 67-77.
29. Helander, Nagamachi, M.-1992, Design for Manufacturability, A systems approach to Concurrent Engineering and Ergonomics, ISBN, 0-74840-009-5, Taylor and Francis, London 1992.
30. Houten, F.J.A.M. van 1997, Practische toepassingen van feature-technologie (deell). De Constructeur Dec 1997/12a, p.p. 36-52, Univ. Twente, The Netherlands.
31. Houten, F.J.A.M. van; Kais, H.J.J. 1999, Global consistency of Tolerances, proc. 6" CIRP seminar on Computer-Aided Tolerancing, Enschede, 22-24 March 1999, Kluwer publ.
32. Ishii, K. Miller, R.A. 1992, Design representation for manufacturability evaluation in CAD: Beyond featurebased design. Proc, of Computers in Engineering Vol.l ASME 1992, p.p. 37-44, Ohio State University.
33. Jasperse, H.B. 1995, A macro process planning system for machining operations, ISBN 90 370 0121 1, Ph.D. thesis. Delft University of Technology.
34. Kais, H.J.J.; Lutters, D. 1998, . The role of information management in intelligent manufacturing. Proc, of CIRP int. Seminal" on Intelligent Computation in Manufacturing Kesteloot, P. Tilley, S.
35. Sleeckx, E. 1994, IDAM: An architecture for an integrated DFM/DFA system. Proc, of . conf. Flexible Automation and Integrated Manufacturing 1994, p.p. 409-418, University Leuven, Belgium.
36. Kimura, F. 1995, Representing background information for product description to support product development process. Annals of the CIRP Vol.44/1/1995, . p.p. 113-119, The University of Tokyo.
37. Klocke, F.; Fallbohmer, M. 1999, INNOTECH-System for the identification of manufacturing processes in early phases of product development. Production Engineering Vol. VI/1 1999 . .
38. Krause, F.L. Kimura, F. et al. 1993, Product modelling. Annals of the CIRP Vol.42/2/1993, p.p. 695-706.
39. Koenig, D. T. 1994, Manufacturing Engineering-principles for optimisation, ISBN 1-56032-301-9 Taylor and Francis, Washington, 1994.
40. LeBlanc, A.R. Fadel, G.M. 1993, design data storage and extraction using objects. Concurrent engineering: Research and applications 1993, 1, p.p. 31-38, Clemson University, South Carolina, USA.
41. Lenau, T. 1996, The missing element in Design for Manufacturing, Annals of the CIRP Vol. 45/1/1996 pp. 105-108, Technical University of Denmark.
42. Lindeman, D. Wijaya, L. 1992, Managing design structure data in a concurrent engineering design environment. Engineering Data Management: Key to integrated product development Proc, of ASME 1992, p.p. 97-104, .
43. Liou, S.Y. Miller, R.A. 1991, Design for Die Casting, International Journal oof Computer Integrated Manufacturing.
44. Mahajan, P.V.; Poli, C. et al. 1992, Design for stamping: A feature-based approach. Proc, of ASME 1993 Design for Manufacturability DE Vol 52, p.p. 29-49, .
45. Malkenhorst G. van Technieuws Washington, Technieuws, vol. 32 no.3, p.p. 3-25, Ministerie van Economische Zaken, The Netherlands.
46. Maree, W.G. Basson, A.H. 1996, Design for Fabrication Early . Cost Estimation for Small Production Volume, Proceedings of int. seminar on manufacturing systems, may 15-17, p.p. 76-81, University of Stellenbosch, South Africa.
47. Medina, E.A. Maias, J.C. 1998, Simulation and optimasation sytsem for design of multi-stage material processes. Transactions of the North American manufacturing research institution of SME vol.XXVI 1998, p.p. 287-292.
48. Meerkamm, H. 1995, Product Modelling: A prerequisite for effective product development. Proceedings of Productmodeller'95 Linkoping, april 25-26, ISBN91-7871-541-5, p.p. 25-47, University of Erlangen, Germany.
49. Merhar, C. Chong, C. Ishii, K. 1994, Simultaneous design for manufacturing process selection of engineering plastics, rules. Software tool. International Journal of material & product technology, volume 9, p.p. 61 ▪-79, Ohio.
50. Molloy, O. S. Wannan, E.A. 1998, Design for Manufacturing and Assembly, concepts, architectures and implementation, London : Chapman and Hall, 1998.
51. Molengraaf, J.C.M, v/d et al. . 1993, Selection procedures for manufacturing processes for design engineers. Robotics & Computer Integrated Manufacturing Vol 10 No 1/2, p.p. 57-64, University of Eindhoven.
52. Net, A.J. van der Vries, W.A.H. 1996, A relation-based product model suited for integrating design and manufacturing, Aimals of the CIRP vol.45/1, p.p. 161-164, Eindhoven University of Technology-.
53. Ngoi, B.K.A.; Ong, C.T. 1998, Product and process dimensioning and tolerancing techniques- A state-of-theart review, Int. J. Advanced Manuf.. Technologies (1998) 14, p.p. 910-917.
54. Nnaji, B.O. Liu, H.C. Rembold, U. 1993, A product modeller for discrete components. International Journal Production Res. 1993 Vol.31 no.9, p.p. 2017-2044.
55. O'Donnell, W.; Gomba, Karen M. 1992, Design for manufacturability/continuous flow, manufacturing: An operating procedure. Proc, of AMSE 1992 Design for Manufacture, DE vol. 51, p.p. 1-5.
56. Pahl, G. Beitz, W. 1988, Engineering-Design-A systematic approach. Springer-Verlag, London 1988.
57. Parsaei, H.R. Sullivan, W.G. 1993, Concurrent engineering; contemporary issues and modern design tools, ISBN 0 412 46510 8 London; Chapman and Hall, 1993.
58. Pighini, U. Long, W. Todaro, F. 1989, Methodological design for manufacture. Proceedings of the International Conference on Engineering Design 1989 Vol. 1, Italy.
59. Rangaraj, B.S. Thompson, J.G. Krishnaswami, P. 1992, A hybrid computational model for mechanical design. Computers in Engineering, Vol. 1 Proc. ASME 1992, p.p. 75-81, Kansas State University, Manhattan, Kansas.
60. Reed, R. G. Sturges, R. H, 1993, A model for performanceintelligent design advisors, DE-Vol.65-1, Advances in Design Automation-vol.l ASME 1993, p.p. 269-275.
61. Rohatynski, R. 1996, Concurrent engineering and features: New challenge for methodology of engineering design. The Tools and Methods for Concurrent Engineering, Proceedings of the Int. Symp. on TMCE 29-31 may, 1996, Budapest, p.p. 157-175, Poland.
62. Roy, U.; Liao, J. 1998, Application of a blackboard framework to a cooperative fixture design system. Computers in Industiy 37, p.p. 67-81, Syracuse University.
63. Salomons, O.W. 1995, Computer support in the design of mechanical products, ISBN 90-9007877-0, Ph.D. thesis. University of Twente, The Netherlands.
64. Clement A. et al. 1998, The TTRSs: 13 constraints for dimensioning and tolerancing, in ElMaraghy, H.A. Geometi'ic Design Tolerancing, ISBN 0412 83000 0 London : Chapman and Hall, 1998 Sam.
65. Lazaro, A. de; Engquist, D.T. 19, 92, A knowledge-based of advisor for the design of sheet metal parts, Proc, of ASME 1992 Design for Manufacture DE Vol 51, p.p. 35-41, .
66. Schiebeler, R. Ehrlenspiel, K. 1993, REKK: A Knowledge based system as an Integrated design-assistant, DE-Vol. 52, Design for Manufacturability, ASME 1993, p.p. 69-74.
67. Tichem, M. 1997, A Design Co-ordination Approach to Design for X, Ph.D. thesis ISBN 90-370-0163-7, Delft University of Technology, .
68. Tomiyama, T. Xue, D. Umeda, Y. et al. 1992, Systematising Design Knowledge for Intelligent CAD Systems in Oiling G.J.; Kimura, F. Human Aspects in Computer Integrated Manufacturing, p.p. 237-248 Elsevier Science Publ.; North-Holland, 1992.
69. Tusveld, F. H. 1991, Design and Manufacturing: Integration through Quality, Proc. 4 International Conference on Industrial and Engineering Applications of Al & ES, HCS Technology Industrial Automation, The Netherlands Twomey, Janet. M.
70. Littell, M.C. 1998, Development of large knowledge-based systems for a manufacturing setting. Technical papers of the North American manufacturing research institution of SME1998, p.p. 95-100.
71. Venkatachalam, A. R. et al. 1993, Automating design for manufacturability through expert systems approaches, in Concurrent Engineering, contemporary issues and modern design tools, in Parsaei and Sullivan (1993).
72. Vries, W.A.H. de 1996, Manufacturable Design Operations, ISBN 90-386-0198-0, Ph.D. thesis. University of Technology Eindhoven.
73. Wiendahl, H.P.; Wahlers, T.; Mittendorf, M. 1999, Supporting the Design of Logistically Friendly Products, Production Engineering Vol. VI/1 1999.
74. Wong, A. Sriram, D. 1993, SHARED: An information model for cooperative product development. Research in Engineering Design 1993, 5, p.p. 21-39.
75. Wright, I. C. 1998, Design methods in engineering and product design, ISBN 0 07 709376 3, London : McGraw-Hill, 1998.
76. Zhang, C. Wang, H.P. 1992, Simultaneous Optimisation of Design and Manufacturing-Tolerances with Process Selection, Annals of the CIRP Vol. 41/1, p.p. 569-572.
77. Zondervan, P.R.; Borsboom, J.N. 1996, DTM/Sheetmetal: Production technology integrated in CAD/CAM, Sheet Metal 1996, proc, of the 4 int. conf. Enschede, 1-3 April 1996.