Extension of Oxley's analysis of machining to use the Johnson-Cook material model

American Society of Mechanical Engineers, Manufacturing Engineering Division, MED

Volumn 12, Issue , 2001, Pages 187-196

  Adibi Sedeh, Amir H ^a   Madhavan, Vis ^a   Bahr, Behnam ^a  

^a Wichita State University   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

CARBON STEEL; HOT ROLLING; MACHINING; PRESSURE EFFECTS; SHEAR STRESS; STRAIN RATE; TEMPERATURE DISTRIBUTION; THERMAL GRADIENTS;

CUTTING SPEED;

MECHANICAL ENGINEERING;

EID: 0242694856     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: None     Document Type: Conference Paper

References (35)

1. Armarego, E.J.A., 1998, A generic mechanics of cutting approach to predictive technological performance modeling of the wide spectrum of machining operations, Machining Science and Technology, 2(2), pp. 191-211.
2. Arsecularatne, J.A., Mathew, P. and Oxley, P.L.B., 1995, Prediction of chip flow direction and cutting forces in oblique machining with nose radius tools, Proc. Inst. Mech. Eng., part B, 209, pp. 305-315.
3. Bao, H. and Stevenson, M.G., 1976, A basic mechanism for built-up edge formation in machining, Annals of CIRP, 25/1, PP.53-57.
4. Boothroyd, G., 1963, Temperatures in orthogonal metal cutting, Proc. Instn. Mech. Engrs., 177, pp. 789-802.
5. Camacho, G.T. and Ortiz, M., 1997, Adaptive Lagrangian modeling of ballistic penetration of metallic targets, J. Computer Meth. Appl. Mech. Eng. 142, pp. 269-301.
6. Dewhurst, P., 1978, On the non-uniqueness of the machining process, Proc. R. Soc. Lond. A360, pp. 587-610.
7. Eggleston, D., M., Herzog, R. and Thomson, E. G., 1959, Observations on the angle relationships in metal cutting, Trans. ASME, Series B, Journal of Engineering for Industry, 81, pp. 263-279.
8. Ernst, H., 1938, Physics of metal cutting, in Machining of Metals, American Society for Metals, Cleveland, Ohio. pp. 1-34.
9. Fang, N., Jawahir, I.S. and Oxley, P.L.B., 2001, A universal slip-line model with non-unique solutions for machining with curled chip formation and a restricted contact tools, Int. J. Mech. Sci, 43, pp. 557-580.
10. Fenton, R.G. and Oxley, P.L.B., 1968-69, Mechanics of orthogonal machining: allowing for the effects of strain-rate and temperature on tool-chip friction, Proc. Inst. Mech. Eng., 183, pp. 417-438.
11. Hastings, W.F., Mathew, P. and Oxley, P.L.B., 1980, Machining theory for predicting chip geometry, cutting forces, etc., from work material properties and cutting conditions, Proc. R. Soc. Lond. A371, pp. 569-587.
12. Hastings, W.F. and Oxley, P.L.B., 1976, Minimum work as a possible criterion for determining the frictional conditions at the tool/chip interface in machining, Phil. Trans. R. Soc. Lond., 282, pp. 565-584.
13. Hastings, W.F., Stevenson, M.G. and Oxley, P.L.B., 1974, Predicting a material's machining characteristics using flow stress properties obtained from high speed compression tests, Proc. Inst. Mech. Eng. 188, pp. 245-252.
14. Hill, R., 1954, The mechanics of machining: a new approach, J. Mech. Phys. Solids, 3, pp. 47-53.
15. th International Symposium on Ballistics, pp.541-547.
16. Kobayashi, S., Herzog, R. P., Eggleston, D. M. and Thomsen, E. G., 1960, A critical comparison of metal-cutting theories with new experimental data, Journal of Engineering for Industry, pp. 333-347.
17. rd Conf. Mech. Prop. High Rates of Strain, pp. 389-396.
18. Kristyanto, B., Mathew, P. and Arsecularatne, J.A., 2000, Determination of material properties of Aluminum from machining tests, ICME 2000 - Eighth Int. Conf. On Manuf. Eng., Sydney, Australia, 27-30 August.
19. Kudo, H., 1965, Some new slip-line solutions for two-dimensional steady-state machining, Int. J. Mech. Sci., 7, pp. 43-55.
20. Lee, E. H. and Shaffer, B. W., 1951, The theory of plasticity applied to a problem of machining, J. Appl. Mech., 73, pp. 405-413.
21. Madhavan, V., Chandrasekar, S. and Farris, T.N., 2000, Machining as a wedge indentation, Journal of Applied Mechanics, 67, pp. 128-139.
22. Mathew, P. and Oxley, P.L.B., 1980, Predicting the cutting conditions at which built-up edge disappears when machining plain carbon steels, CIRP Annals, 29, pp. 11-14.
23. Merchant, M.E., 1945, Mechanics of the metal cutting processes, J. Appl. Mech., 11, pp. A168-A175.
24. MIL-HDBK-5H, 1998, Metallic materials and elements for aerospace vehicle structures, Department of Defense, USA.
25. Nakayama, K., 1956, Temperature rise of workpiece during metal cutting, Bull. Fact. Eng. Yokohama Nat. Univ., 5, pp.1-10.
26. Narayanan, V., Krishnamurthy, K., Chandrasekar, S., Farris, T.N. and Madhavan, V., 2001, Measurement of the temperature field at the chip-tool interface in machining, Symposium on Fundamental Issues in Machining, ASME IMECE 2001, New York, NY.
27. Oxley, P.L.B., 1989, The mechanics of machining: an analytical approach to assessing machinability, E. Horwood, Chichester, England
28. Oxley, P.L.B. and Hastings, W.F., 1977, Predicting the strain-rate in the zone of intense shear in which the chip is formed in machining from the dynamic flow stress properties of the work material and the cutting conditions, Proc. R. Soc. Lond., A356, pp. 395-410.
29. Palmer, W. B. and Oxley, P.L.B., 1959, Mechanics of metal cutting, Proc. Inst. Mech. Eng., 173, pp. 623-654.
30. Piispaanen, V., 1948, Theory of formation of metal chips, Journal of Applied Physics, 19, pp. 876-881.
31. Rosakis, P., Rosakis, A.J., Ravichandran, G. and Hodowany, J., 2000, A thermodynamic internal variable model for the partition of plastic work into heat and stored energy in metals, J. Mech. Phys. Solids, 48, pp. 581-607.
32. nd CIRP international Workshop on Modeling of Machining Operations, pp. 234-255, Nantes, France.
33. Stevenson, M.G. and Oxley, P.L.B., 1969-1970, An experimental investigation of the influence of speed and scale on the strain-rate in a zone of intense plastic deformation, Proc. Inst. Mech. Eng., 184(31), pp. 561-576.
34. Watson, A., R., 1984, The theoretical prediction of torque and thrust in drilling, PhD thesis, University of New South Wales.
35. Young, H.T., Mathew, P. and Oxley, P.L.B., 1994, Predicting cutting forces in face milling, Int. J. Mach. Tools Manufac., 34(6), pp. 771-783.