Corrosion behavior of plasma-sprayed coatings on a Ni-base superalloy in Na2SO4-60 Pct V2O5 environment at 900 °C

Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science

Volumn 36, Issue 4, 2005, Pages 1007-1015

  Singh, Harpreet ^a   Puri, D ^a   Prakash, S ^a  

^a INDIAN INSTITUTE OF TECHNOLOGY ROORKEE   (India)

Author keywords

[No Author keywords available]

Indexed keywords

COATINGS; CORROSION; ENERGY DISPERSIVE SPECTROSCOPY; KINETIC THEORY; MICROANALYSIS; MOLTEN MATERIALS; PLASMA SPRAYING; SCANNING ELECTRON MICROSCOPY; SODIUM COMPOUNDS; SUPERALLOYS; THERMOGRAVIMETRIC ANALYSIS; X RAY DIFFRACTION ANALYSIS;

ELECTRON PROBE MICROANALYSIS; HOT CORROSION; METALLIC COATINGS; MOLTEN SALT; PLASMA SPRAYED COATINGS;

NICKEL ALLOYS;

EID: 17844380541     PISSN: 10735623     EISSN: None     Source Type: Journal    
DOI: 10.1007/s11661-005-0294-x     Document Type: Article

References (47)

1. M.F. Stroosnijder, R. Mevrel, and M.J. Bennett: Mater. High Temp., 1994, vol. 12 (1), pp. 53-56.
2. M. Yoshiba: Corr. Sci., 1993, vol. 35 (5-8), pp. 1115-24.
3. K.N. Strafford, P.K. Datta, and C.G. Googan: Coatings and Surface Treatment for Corrosion and Wear Resistance, Institution of Corrosion Science and Technology, Birmingham, United Kingdom, Ellis Horwood Limited Chichester, United Kingdom, 1984.
4. J.T. DeMasi-Marcin and D.K. Gupta: Surf. Coating, 1994, vols. 68-69, pp. 1-9.
5. Y. Itoh, M. Saitoh, and Y. Ishiwata: J. Eng. Gas Turbines Power (Trans. ASME), 2002, vol. 124, pp. 270-75.
6. P. Fauchais, J.F. Coudert, and M. Vardelle: J. Phys., 1997, vol. IV7, pp. C4-187-C4198.
7. B.J. Gill and R.C. Tucker, Jr.: Mater. Sci. Technol., 1989, vol. 2, p. 207.
8. A.R. Nicoll, H. Grruner, G. Wuest, and S. Keller: Mater. Sci. Technol., 1986, vol. 2, p. 214.
9. N. Eliaz, G. Shemesh, and R.M. Latanision: Eng. Failure Analysis, 2002, vol. 9, pp. 31-43.
10. J. Tuominen, P. Vuoristo, T. Mantyla, S. Ahmaniemi, J. Vihinen, and P.H. Andersson: J. Thermal Spray Technol., 2002, vol. 11 (2) pp. 233-43.
11. J.L. He, K.C. Chen, C.C. Chen, A. Leyland, and A. Matthews: Surf. Coating Technol., 2001, vol. 135, pp. 158-65.
12. J.H. Schneibel and P.F. Becher: J. Chin. Inst. Eng., 1999, vol. 22 (1), pp. 1-12.
13. C. Chuanxian, H. Bingtang, and L. Huiling: Thin Solid Films, 1984, vol. 118 (4), pp. 485-93.
14. H. Liao, B Normand, and C. Coddet: Surf. Coating Technol., 2000, vol. 124, pp. 235-42.
15. A.N. Khan and J. Lu: Surf. Coating Technol., 2003, vol. 166, pp. 37-43.
16. M.A Uusitalo, P.M.J. Vuoristo, and T.A Mantyla: Mater. Sci. Eng. A, (Struct. Mater.: Prop., Microstr. and Processing), 2003, vol. A346 (1-2), pp. 168-77.
17. T. Hodgkiess and A Neville: Proc. 15th Int. Thermal Spray Conf., Nice, 1998, pp. 63-68.
18. Y.S. Hwang and R.A. Rapp: Corrosion, 1989, vol. 45 (11), pp. 933-37.
19. H. Singh, D. Puri, and S. Prakash: Surf. Coating Technol., 2005, vol. 192, pp. 27-38.
20. Gitanjaly: Ph.D. Thesis, IITR, Roorkee, India, 2003.
21. GA. Kolta, I.F. Hewaidy, and N.S. Felix: Thermochim. Acta, 1972, vol. 4, pp. 151-64.
22. K. Sachs: Metallurgia, 1958, April, pp. 167-73.
23. B.S. Sidhu and S. Prakam: Surf. Coating Technol., 2003, vol. 166, pp. 89-100.
24. B. Singh: Ph.D. Thesis. IITR, Roorkee, India, 2003.
25. P. Niranatlumpong, C.B. Ponton, and H.E. Evans: Oxid Met., 2000, vol. 53 (3-4), pp. 241-58.
26. H.E. Evans and M.P. Taylor: Oxid Met., 2001, vol. 55 (1-2), pp. 17-34.
27. B. Wang, J. Gong, A.Y. Wang. C. Sun, RF. Huang, and L.S. Wen: Surf. Coating Technol., 2002, vol. 149 (1), pp. 70-75.
28. G.R Heath, P. Heimgartner, G. Irons, R. Miller, and S. Gustafsson: Mater. Sci. Forum, 1997, vols 251-254, pp. 809-16.
29. N.S. Bornstein, M.A. Decrescente, and H.A. Roth: Proc. Conf. on Gas Turbine Materials in the Marine Environment, MMIC-75-27, Columbus, OH, 1975, pp. 115-60.
30. Y.N. Wu, G. Zhang, Z.C. Feng, B.C. Zhang, Y. Liang, and F.J. Liu: Surf. Coating Technol., 2001, vol. 138, pp. 56-60.
31. X. Wu, D. Weng, Z. Chen, and L. Xu: Surf. Coating Technol., 2002, vol. 140, pp. 231-37.
32. Y. Longa and M. Takemoto: Corrosion, 1992, vol. 48, pp. 599-607.
33. M. Seiersten and P. Kofstad: High Temp. Technol., 1987, vol. 5 (3), p. 115.
34. U.K. Chatterjee, S.K. Bose, and S.K. Roy: Environmental Degradation of Metals, Marcel Dekker, New York, NY, 2001.
35. Y. Longa-Nova, Y.S. Zhang, M. Takemoto, and R.A. Rapp: Corrosion, 1996, vol. 52 (9), pp. 680-89.
36. G. Calvarin, R. Molins, and A.M. Huntz: Oxid Met., 2000, vol. 53 (1-2), pp. 25-48.
37. H. Nickel, W.J. Quadakkers, and L. Singhieser: Anal. Bioanal. Chem. 2002, vol. 374, pp. 581-87.
38. R.L. McCarron, N.R. Lindliad, and D. Chatterji: Corrosion, 1976, vol. 32 (12), pp. 476-81.
39. K. Natesan: Oxid Met., 1988, vol. 30, p. 53.
40. A.U. Malik, R Ahmad, S. Ahmad, and S. Ahmad: Prakt. Metallogr., 1992, vol. 29, pp. 255-68.
41. W.H. Lee and R.Y. Lin: Mater. Chem. Phys., 2002, vol. 77, pp. 86-96.
42. G.J. Santoro: Oxid Met., 1979, vol. 13 (5), pp. 405-35.
43. K.L. Luthra: J. Electrochem. Soc., 1985, vol. 132 (6), pp. 1293-98.
44. M.G. Hocking, V. Vasantasree, and P.S. Sidky: Metallic & Ceramic Coatings, Longmans, United Kingdom, 1989.
45. P.S. Sidky and M.G. Hocking: Br. Corr. J., 1999, vol. 34 (3), pp. 171-83.
46. F.S. Petit and G.W. Goward: in Coatings for High Temperature Applications, E. Lang, ed., Applied Science Publishers. New York, 1983, p. 79.
47. J.R Nicholls: JOM, 2000, Jan., pp. 28-35.