Split Hopkinson pressure bar experiments on polymeric foams

International Journal of Vehicle Design

Volumn 37, Issue 2-3, 2005, Pages 185-198

  Song, Bo ^a   Chen, Weinong ^a   Jiang, Xiquan ^a  

^a University of Arizona   (United States)

Author keywords

Compressive behaviour; High strain rate; Polymeric foams; Split Hopkinson pressure bar (SHPB)

Indexed keywords

DEFORMATION; ELASTICITY; MATERIALS TESTING; POLYURETHANES; STRAIN RATE; STRESS ANALYSIS; YIELD STRESS;

COMPRESSIVE BEHAVIOR; HIGH STRAIN RATE; POLYMERIC FOAMS; SPLIT HOPKINSON PRESSURE BAR (SHPB);

FOAMS;

EID: 17544373633     PISSN: 01433369     EISSN: None     Source Type: Journal    
DOI: 10.1504/IJVD.2005.006656     Document Type: Article

References (48)

1. Abdennadher, S. and Zhao, H. (2003) 'A study of inertia effects under impact loading', Key Engng. Mater., Vols. 233-236, pp.223-228.
2. Ashe, W.A. (1998) 'Rigid cellular plastics in automotive applications', ASTM Standard News, Vol. 16, pp.32, 33.
3. Bacon, C. (1998) 'An experimental method for considering dispersion and attenuation in a viscoelastic Hopkinson bar', Exper. Mech., Vol. 38, pp.242-249.
4. Casem, D. and Moy, P. (2003) 'Acceleration compensation of quartz transducers embedded in a split Hopkinson pressure bar', Proc. 2003 SEM Annual Conference & Exposition on Experimental and Applied Mechanics, June 2-4, Charlotte, NC.
5. Chen, W. and Ravichandran, G. (1996) 'Static and dynamic compressive behavior of aluminum nitride under moderate confinement', J. American Ceramic Soc., Vol. 79, pp.579-584.
6. Chen, W., Lu, F, Frew, D.J. and Forrestal, M.J. (2002c) 'Dynamic compression testing of soft materials', Trans. ASME, J. Appl. Mech., Vol. 69, pp.214-223.
7. Chen, W., Lu, F. and Winfree, N.A. (2002a) 'A split Hopkinson bar technique for low impedance materials', Exper. Mech., Vol. 39, pp.81-85.
8. Chen, W., Lu, F. and Winfree, N.A. (2002b) 'Dynamic compressive response of polyurethane foams of various densities', Exper. Mech., Vol. 42, pp.65-73.
9. Chen, W., Lu, F. and Zhou, B. (2000) 'A quartz crystal imbedded split Hopkinson bar for soft materials', Exper. Mech., Vol. 40, pp.1-6.
10. Chen, W., Song, B., Frew, D.J. and Forrestal, M.J. (2003) 'Dynamic small strain measurement with a split Hopkinson pressure bar', Exper. Mech., Vol. 43, pp.20-23.
11. -1, Int. J. Solids and Structures, Vol. 38, pp.8989-8998.
12. Chen, W., Zhang, B. and Forrestal, M.J. (1999) 'A split Hopkinson bar technique for low impedance materials', Exper. Mech., Vol. 39, pp.81-85.
13. Chou, C.C., Zhao, Y., Lim, G.G. and Song, G.S. (1998) 'A constitutive model for polyurethane foams with strain-rate and temperature effects', S.A.E. Transactions - J. Materials. & Manufacture, Vol. 107, pp.743-754.
14. Dioh, N.N., Leevers, P.S. and Williams, J.G. (1993) 'Thickness effects in split Hopkinson pressure bar tests', Polymer, Vol. 34, pp.4230-4234.
15. Frew, D.J., Forrestal, M.J. and Chen, W. (2001) 'A split Hopkinson bar technique to determine compressive stress-strain data for rock materials', Exper. Mech., Vol. 41, pp.40-46.
16. Frew, D.J., Forrestal, M.J. and Chen, W. (2002) 'Pulse-shaping techniques for testing brittle materials with a split Hopkinson pressure bar', Exper. Mech., Vol. 42, pp.93-106.
17. Gamby, D. and Chaoufi, J. (1991) 'Asymptotic analysis of wave propagation in a finite viscoplastic bar', Acta Mech., Vol. 87, pp. 163-178.
18. Gary, G., Klepaczko, J.R. and Zhao, H. (1992) 'Corrections for wave dispersion and analysis of small strains with split Hopkinson bar', Proc. Int. Symp. Impact Engng., Sendai, Japan, pp.73-78.
19. Gary, G.T. and Blumenthal, W.R. (2000) 'Split-Hopkinson pressure bar testing of soft materials', Mechanical Testing and Evaluation, Metals Handbook, American Society for Metals, Materials Park, Ohio, Vol. 8, pp.488-496.
20. Gary III, G.T., Blumenthal, W.R., Trujillo, C.P. and Carpenter II, R.W. (1997) 'Influence of temperature and strain rate on the mechanical behavior of adiprene L-100', J. Phys. IV, Vol. 7, pp.523-528.
21. Gibson, L.J. and Ashby, M.F. (1999) Cellular Solids, Structure and Properties, 2nd ed., Cambridge.
22. Gong, J.C., Malvern, L.E. and Jenkins, D.A. (1990) 'Dispersion investigation in the split Hopkinson pressure bar', Trans. ASME, J. Eng. Mater. Tech., Vol. 112, pp.309-314.
23. Goods, S.H., Neuschwanger, C.L., Henderson, C.C. and Skala, D.M. (1998) 'Mechanical properties of CRETE, a polyurethane foam', J. Appl. Polymer Sci., Vol. 68, pp.1045-1055.
24. Gray, G.T. (2000) 'Classic split-Hopkinson pressure bar testing', Mechanical Testing and Evaluation, Metals Handbook, American Society for Metals, Materials Park, OH, Vol. 8, pp.462-476.
25. Kipp, M.E., Chhabildas, L.C., Reinhart, W.D. and Wong, M.K. (1999) 'Polyurethane foam impact experiments and simulations', APS Shock Compression of Condensed Matter - 1999, June 27-July 2, Snowbird, UT, APS.
26. Kolsky, H. (1949) 'An investigation of mechanical properties of materials at very high rates of loading', Proc. Phys. Soc., Vol. B62, pp.676-700.
27. Kraynik, A.M., Neilsen, M.K., Reinelt, D.A. and Warren, W.E. (1999) 'Foam micromechanics', in Sadoc, J.F. and River, N. (Eds.): Foams and Emulsions, Kluwer Academic Publishers, Netherlands.
28. Lankford, J. and Dannemann, K.A. (1998) 'Strain rate effects in porous materials', Porous and Cellular Materials for Structural Applications, Materials Research Society, Pittsburg, PA, pp.103-108.
29. Lifshitz, J.M. and Leber, H. (1994) 'Data processing in the split Hopkinson pressure bar tests', Int. J. Impact Engng., Vol. 15, pp.723-733.
30. Progelhof, R.C. (1986) 'Impact measurement of low-pressure thermoplastic structural foam', Proc. Instrumented Impact Testing of Plastics and Composite Materials, Houston, TX, March 11-12, ASTM, pp. 105-116.
31. Ravichandran, G. and Subhash, G. (1994) 'Critical appraisal of limiting strain rates for compression testing of ceramics in a split Hopkinson pressure bar', J. American Ceramic Soc., Vol. 77, pp.263-267.
32. Sawas, O., Brar, N.S. and Brockman, R.A. (1998) 'Dynamic characterization of compliant materials using an all-polymeric split Hopkinson bar', Exper. Mech., Vol. 38, pp.204-210.
33. Schumacher, W. (1987) 'Polyurethane foams to improve shock absorption and assembly of new bumper systems', Proc. Polyurethanes World Congress 1987: 50 Years of Polyurethanes, Aachen, Germany, September 29-October 2, Technomic Publishing Company, pp.248-251.
34. Song, B. and Chen, W. (2003) 'One-dimensional dynamic compressive behavior of EPDM rubber', Trans. ASME, J. Engng. Mater. Tech., Vol. 125, pp.294-301.
35. Song, B., Chen, W. and Frew, D.J. (2003b) 'Dynamic compressive response and failure behavior of an epoxy syntactic foam', J. Composite Mater., Vol. 38, pp.915-936.
36. Song, B., Chen, W. and Weerasooriya, T. (2003a) 'Quasi-static and dynamic compressive behaviors of a glass/epoxy composite', J. Composite Mater., Vol. 37, pp.1723-1743.
37. Song, B., Chen, W., Yanagita, T. and Frew, D.J. (2005a) 'Confinement effects on the dynamic compressive properties of an epoxy syntactic foam', Composite Structures, Vol. 67, pp.279-287.
38. Song, B., Chen, W., Yanagita, T. and Frew, D.J. (2005b) 'Temperature effects on the dynamic compressive behavior of an epoxy syntactic foam', Composite Structures, Vol. 67, pp.289-298.
39. Sounik, D.F., Gansen, P., Clemons, J.L. and Liddle, J.W. (1997) 'Head-impact testing of Polyurethane energy-absorbing (EA) foams', S.A.E. Transactions - J. Materials & Manufacture, Vol. 106, pp.211-220.
40. Valpey-Fisher (1996) The User's Guide to Ultrasound & Optical Products, Valpey-Fisher, Hopkinton, MA.
41. Wang, L., Labibes, K., Azari, Z. and Pluvinage, G. (1994) 'Generalization of split Hopkinson bar technique to use viscoelastic bars', Int. J. Impact Engng., Vol. 15, pp.669-686.
42. Wasley, R.J., Hoge, K.G. and Cast, J.C. (1969) 'Combined strain gauge-quartz crystal instrumented Hopkinson split bar', The Review of Scientific Instruments, Vol. 40, pp.889-894.
43. Weiser, E.S., Johnson, T.F., Clair, T.L.S., Echigo, Y., Kaneshiro, H. and Grimsley, B.W. (2000) 'Polyimide foams for aerospace vehicles', High Perform. Polym., Vol. 12, pp. 1-12.
44. Wu, X.J. and Gorham, D.A. (1997) 'Stress equilibrium in the split Hopkinson pressure bar test', J. Phys. IV France Colloq. C3 (DYMAT97), Vol. 7, pp.91-96.
45. Yu-Hallada, L.C., Kuczynski, E.T. and Weierstall, M. (1995) 'Polyurethane: the material of choice for occupant protection and energy management', Proc. Polyurethanes 1995, Chicago, IL, September 26-29, Society of the Plastic Industry, pp.390-396.
46. Zhang, J., Kikuchi, N., Li, V., Yee, A. and Nusholtz, G. (1998) 'Constitutive modeling of polymeric foam material subjected to dynamic crash loading', Int. J. Impact Engng., Vol. 21, pp.369-386.
47. Zhao, H. and Gary, G. (2002) 'Behaviour characterization of polymeric foams over a large range of strain rates', Int. J. Vehicle Design, Vol. 30, pp. 135-145.
48. Zhao, H., Gary, G. and Klepaczko, J.R. (1997) 'On the use of a viscoelastic split Hopkinson pressure bar', Int. J. Impact Engng, Vol. 19, pp.319-330.