Dynamic compression testing of soft materials

Journal of Applied Mechanics, Transactions ASME

Volumn 69, Issue 3, 2002, Pages 214-223

  Chen, W ^a   Lu, F ^a   Frew, D J ^a   Forrestal, M J ^a  

^a University of Arizona   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

COMPRESSIVE STRENGTH; DEFORMATION; FOAMED PLASTICS; POLYURETHANES; RUBBER; SILICONES; STRAIN; STRESS ANALYSIS;

SOFT MATERIALS;

COMPRESSION TESTING;

EID: 0036588437     PISSN: 00218936     EISSN: None     Source Type: Journal    
DOI: 10.1115/1.1464871     Document Type: Article

References (36)

1. Vallee, E., Shukla, A., 1996, "A Study of the Dynamic Behavior of Elastomeric Materials Using Finite Elements," ASME J. Eng. Mater. Technol., 118, pp. 503-508.
2. Clamroth, R., 1981, "Determination of Viscoelastic Properties by Dynamic Testing," Polym. Test., 2, pp. 263-286.
3. Harris, J.A., 1987, "Dynamic Testing Under Nonsinusoidal Conditions and the Consequences of Nonlinearity for Service Performance," Rubber Chem. Technol., 60, pp. 870-887.
4. Kolsky, H. 1949, "An Investigation of the Mechanical Properties of Materials at Very High Rates of Loading," Proc. R. Soc. London, Ser. B, B62, pp. 676-700.
5. Gray, G.T, 2000, "Classic Split-Hopkinson Pressure Bar Testing," Mechanical Testing and Evaluation, Metals Handbook, American Society for Metals, Materials Park, Ohio, 8, pp. 462-476.
6. Ross, C.A., Jerome, D.M., Tedesco, J.W., and Hughes, M.L., 1996, "Moisture and Strain Rate Effects on Concrete Strength," ACI Mater. J., 93, pp. 293-300.
7. Chen, W., and Ravichandran, G., 1996, "Static and Dynamic Compressive Behavior of Aluminum Nitride under Moderate Confinement," J. Am. Ceram. Soc., 79(3), pp. 579-584.
8. Chen, W., and Ravichandran, G., 1997, "Dynamic Compressive Behavior of a Glass Ceramic Under Lateral Confinement," J. Mech. Phys. Solids, 45, pp. 1303-1328.
9. Chen, W., and Ravichandran, G., 2000, "Failure Mode Transition in Ceramics Under Dynamic Multiaxial Compression," Int. J. Fract., 101, pp. 141-159.
10. Walley, S.M., Field, J.E., Pope, P.H., and Safford, N.A., 1989, "A Study of the Rapid Deformation Behavior of a Range of Polymers," Philos. Trans. R. Soc. London, Ser. A, A328, pp. 1-33.
11. Gamby, D., and Chaoufi, J., 1991, "Asymptotic Analysis of Wave Propagation in a Finite Viscoplastic Bar," Acta Mech., 87, pp. 163-178.
12. Wang, L., Labibes, K., Azari, Z., and Pluvinage, G., 1994, "Generalization of Split Hopkinson Bar Technique to Use Viscoelastic Bars," Int. J. Impact Eng., 15, pp. 669-686.
13. Zhao, H., Gary, G., and Klepaczko, J.R., 1997, "On the Use of a Viscoelastic Split Hopkinson Pressure Bar," Int. J. Impact Eng., 19, pp. 319-330.
14. Sawas, O., Brar, N.S., and Brockman, R.A., 1998, "Dynamic Characterization of Compliant Materials Using an All-Polymeric Split Hopkinson Bar," Exp. Mech., 38, pp. 204-210.
15. Frew, D.J., Forrestal, M.J., and Chen, W., 2001, "A Split Hopkinson Bar Technique to Determine Compressive Stress-Strain Data for Rock Materials," Exp. Mech., 41, pp. 40-46.
16. Gray, G.T., and Blumenthal, W.R., 2000, "Split-Hopkinson Pressure Bar Testing of Soft Materials," Mechanical Testing and Evaluation, Metals Handbook, American Society for Metals, Materials Park, Ohio, 8, pp. 488-496.
17. Chen, W., Zhang, B., and Forrestal, M.J., 1999, "A Split Hopkinson Bar Technique for Low-Impedance Materials," Exp. Mech., 39, pp. 81-85.
18. Chen, W., Lu, F., and Zhou, B., 2000, "A Quartz Crystal Embedded Split Hopkinson Bar for Soft Materials," Exp. Mech., 40, pp. 1-6.
19. Dioh, N.N., Leevers, P.S., and Williams, J.G., 1993, "Thickness Effects in Split Hopkinson Pressure Bar Tests," Polymer, 34, pp. 4230-4234.
20. Gray, G.T., III, Blumenthal, W.R., Trujillo, C.P., and Carpenter, R.W., II, 1997, "Influence of Temperature and Strain Rate on the Mechanical Behavior of Adiprene L-100," J. Phys. IV, 7, pp. 523-528.
21. Frantz, C.E., Follansbee, P.S., and Wright, W.J., 1984, "New Experimental Techniques with the Split Hopkinson Pressure Bar," 8th International Conference on High Energy Rate Fabrication, Pressure Vessel and Piping Division, I. Berman and J.W. Schroeder, eds., San Antonio, TX, June 17-21 ASME, New York.
22. Follansbee, P.S., 1985, "The Hopkinson Bar," Mechanical Testing, Metals Handbook, 9th Ed., American Society for Metals, Metals Park, OH, 8, pp. 198-217.
23. Follansbee, P.S., and Frantz, C., 1983, "Wave Propagation in the SHPB," ASME J. Eng. Mater. Technol., 105, pp. 61-66.
24. Duffy, J., Campbell, J.D., and Hawley, R.H., 1971, "On the Use of a Torsional Split Hopkinson Bar to Study Rate Effects in 1100-0 Aluminum," ASME J. Appl. Mech., 37, pp. 83-91.
25. Frew, D.J., Forrestal, M.J., and Chen, W., 2002, "Pulse-Shaping Techniques for Testing Brittle Materials With a Split Hopkinson Pressure Bar," Exp. Mech., 42, pp. 93-106.
26. Lindholm, U.S., 1964, "Some Experiments With the Split Hopkinson Pressure Bar," J. Mech. Phys. Solids, 12, pp. 317-335.
27. Chen, W., and Zhang, X., 1997, "Dynamic Response of Epon 828/T-403 Under Multiaxial Loading at Various Temperatures," ASME J. Eng. Mater. Technol., 119, pp. 305-308.
28. Chen, W., Subhash, G., and Ravichandran, G., 1994, "Evaluation of Ceramic Specimen Geometries Used in Split Hopkinson Pressure Bar," DYMAT J., 1, pp. 193-210.
29. Ravichandran, G., and Subhash, G., 1994, "Critical Appraisal of Limiting Strain Rates for Compression Testing of Ceramics in a Split Hopkinson Pressure Bar," J. Am. Ceram. Soc., 77, pp. 263-267.
30. Karnes, C.H., and Ripperger, E.A., 1966, "Strain Rate Effects in Cold Worked High-Purity Aluminum," J. Mech. Phys. Solids, 14, pp. 75-88.
31. Wasley, R.J., Hoge, K.G., and Cast, J.C., 1969, "Combined Strain Gauge-Quartz Crystal Instrumented Hopkinson Split Bar," Rev. Sci. Instrum., 40, pp. 889-894.
32. Togami, T.C., Baker, W.E., and Forrestal, M.J., 1996, "A Split Hopkinson Bar Technique to Evaluate the Performance of Accelerometers," ASME J. Appl. Mech., 63, pp. 353-356.
33. Wu, X.J., and Gorham, D.A., 1997, "Stress Equilibrium in the Split Hopkinson Pressure Bar Test," J. Phys. IV, 7, pp. 91-96.
34. Ravichandran, G., and Chen, W., 1991, "Dynamic Behavior of Brittle Materials Under Uniaxial Compression," Experiments in Micromechanics of Fracture Resistant Materials, K.S. Kim ed., AMD-130, ASME, New York, pp. 85-90.
35. Nemat-Nasser, S., Isaacs, J.B., and Starrett, J.E., 1991, "Hopkinson Techniques for Dynamic Recovery Experiments," Proc. R. Soc. London, Ser. A, A435, pp. 371-391.
36. Lewis, C.F., 1979, "Properties and Selection: Nonferrous Alloys and Pure Metals," Metals Handbook, 9th Ed., 2, American Society for Metals, Materials Park, OH.