Harvesting energy using a thin unimorph prestressed bender: Geometrical effects

Journal of Intelligent Material Systems and Structures

Volumn 16, Issue 3, 2005, Pages 249-261

  Mossi, Karla ^a   Green, Christopher ^a   Ounaies, Zoubeida ^a   Hughes, Esther ^a  

^a VIRGINIA COMMONWEALTH UNIVERSITY   (United States)

Author keywords

Energy harvesting; Geometry effects; Piezoelectricity; Prestressed curved actuator

Indexed keywords

ACTUATORS; COMPUTATIONAL GEOMETRY; ENERGY CONVERSION; HIGH TEMPERATURE EFFECTS; MATHEMATICAL MODELS; MOSFET DEVICES; PIEZOELECTRICITY; REGRESSION ANALYSIS; SEMICONDUCTING LEAD COMPOUNDS;

ENERGY HARVESTING; GEOMETRY EFFECTS; PRETRESSED BENDER; PRETRESSED CURVED ACTUATORS;

PIEZOELECTRIC DEVICES;

EID: 17444368710     PISSN: 1045389X     EISSN: None     Source Type: Journal    
DOI: 10.1177/1045389X05050008     Document Type: Article

References (34)

1. Antaki, J., Bertocci, G., Green, E., Nadeem, A., Rintoul, T., Kormos, R. and Griffith, B. 1995. "A Gait Powered Autologous Battery Charging System for Artificial Organs," ASAIO Journal, 41:M588-M595.
2. Bryant, R. 1996. "LaRC™-SI: A Soluble Aromatic Polyimide," High Performance Polymers, 8:607-615.
3. Capozzoli, M., Gopalakrishnan, J., Hogan, K., Massad, J., Tokarchik, T., Wilmarth, S., Banks, H., Mossi, K. and Smith, R. 1999. "Modeling Aspects Concerning Thunder Actuators," Proc. SPIE Int. Soc. Opt. Eng., 3667:719-727.
4. Cobb, G. 1998. Introduction to Design and Analysis of Experiments, Springer-Verlag, New York, NY.
5. Dano, M.L. and Hyer, M.W. 1998. "Thermally-induced deformation behavior of unsymmetric laminates," Intl. Journal of Solids and Structures, 35(17):2101-2120.
6. Fay, J. and Golomb, D. 2002. Energy and the Environment, Oxford University Press, New York, NY.
7. Goldfarb, M. and Jones, L. 1999. "On the Efficiency of Electric Power Generation with Piezoelectric Ceramic," Journal of Dynamic Systems, Measurement, and Control, 121:566-571.
8. Goo, N. and Yoon, K. 2003. "Analysis of Lipca-C Actuators." International Journal of Modern Physics, B 17(8 & 9): 1959-1964.
9. Holloway, N., Barnes, K., Draughon, G. and Scott, L. 2002. "Fabrication of Adhesiveless Lightweight Flexible Circuits Using Langley Research Center Solubleimide LaRC SI Polyimide Film," Proc. SPIE Int. Soc. Opt. Eng., 4698:293-303.
10. Hyer, M.W. and Jilani, A.B. 2001. "Manufactured shapes of rectangular RAINBOW actuators," 42nd AIAA/ASME/ASCE/ AHS/ASC Structures, Structural Dynamics, and Materials Conference, 4:2824-2834.
11. Kaysap, A., Lim, J., Johnson, D., Horowitz, S., Nishida, T., Ngo, K., Sheplak, M. and Cattafesta, L. 2002. "Energy Reclamation from a Vibrating Piezoceramic Composite Beam," In: 9th International Congress on Sound and Vibration, ICSV9.
12. Kim, H., Batra, A., Priya, S., Uchino, K., Newnham, R. and Hoffman, H. 2004. "Energy Harvesting Using A Piezoelectric Cymbal Transducer in Dynamic Environment," Actuator 2004, 9th International Conf. on New Actuators Proc., P119:812-816.
13. Kymissis, J., Kendall, C., Paradiso, J. and Gershenfeld, N. 1998. "Parasitic Power Harvesting in Shoes," In: Second IEEE International Conference on Wearable Computing (ISWC), IEEE Computer Society Press, pp. 132-139.
14. Li, G., Furman, E. and Haertling, G. 1997. "Stress Enhanced Displacements in PLZT Rainbow Actuators," American Ceramic Society, 80(6):1382-1388.
15. Montgomery, D. 2001. Design and Analysis of Experiments, 5th edn, John Wiley and Sons, New York, NY.
16. Mossi, K., Ounaies, Z. and Oakley, S. 2001. "Optimizing Energy Harvesting of a Composite Unimorph Pre-stressed Bender," In: 16th Technical Conference of the American Society for Composites, September 9-12, Blacksburg, VA.
17. Mossi, K., Ounaies, Z., Smith, R. and Ball, B. 2003. "Prestressed Curved Actuators: Characterization and Modeling of their Piezoelectric Behavior," Proc. SPIE Int. Soc. Opt., 5053:423-435.
18. Mossi, K., Selby, G. and Bryant, R. 1998. "Thin-layer Composite Unimorph Ferroelectric Driver and Sensor Properties," Materials Letters, 35:39-49.
19. Mulling, J., Usher, T., Dessent, B., Palmer, J., Franzon, P., Grant, E. and Kingon, A. 2001. "Load Characterization of High Displacement Piezoelectric Actuators with Various End Conditions," Sensors and Actuators A: Physical, 94:19-24.
20. Niezrecki, C. and Balakrishnan, S. 2001. "Power Characterization of THUNDER Actuators as Underwater Propulsors," Proc. SPIE Int. Soc. Opt., 4327:88-98.
21. Ochinero, T. and Hyer, M. 2002. "Manufacturing Distortions of Curved Composite Panels," Journal of Thermoplastic Composite Materials, 15(2):79-87.
22. Ottman, G., Hoffman and Lesieutre, G. 2003. "Optimized Piezoelectric Energy Harvesting Circuit Using Step-Down Convertor in Discontinuous Conduction Mode," IEEE, 18(2):696-703.
23. Ottman, G., Hoffman, H., Bhatt, A. and Lesieutre, G. 2002. "Adaptive Piezoelectric Energy Harvesting Circuit for Wireless Remote Power Supply," IEEE Transactions On Power Electronics, 17(5):669-676.
24. Ounaies, Z., Mossi, K., Smith, R. and Berndt, J. 2001. "Low-field and High Field Characterization of Thunder Actuators," Proc. SPIE Int. Soc. Opt, 4333:339-407.
25. Ramsay, M. and Clark, W. 2001. "Piezoelectric Energy Harvesting for Bio MEMS Applications," Proc. SPIE Int. Soc. Opt. Eng., 4332:429-438.
26. Roundy, S., Wright, P. and Rabaey, J. 2004. Energy Scavenging For Wireless Sensor Networks, Kluwer Academic Publishers, New York, NY.
27. Schwarte, R. and Narayanan, M. 2002. "Development of High Performance Stress-biased Actuators through the Incorporation of Mechanical Pre-loads," Sensors and Actuators A: Physical, 101(3):322-331.
28. Shenck, N. and Paradiso, J. 2001. "Energy Scavenging with Shoe-mounted Piezoelectrics," IEEE Micro, 21(i3):30-43.
29. Sodano, H., Lloyd, J. and Inman, D. 2004. "An Experimental Comparison Between Several Active Composite Actuators For Power Generation," Proc. SPIE Int. Soc. Opt. Eng., 5390:370-378.
30. Umeda, M., Nakamura, K. and Ueda, S. 1996. "Analysis of the Transformation of Mechanical Energy to Electrical Energy Using Piezoelectric Vibrator," Japanese Journal of Applied Physics - Part I Regular Papers and Short Notes, 35(5B):3267-3274.
31. Waterfield, G. 2004. "High Performance Pre-stressed Piezoelectric Bender Actuator for Digital Valves," Ceramic Transactions, 150:467-482.
32. Williams, R., Grimsley, B., Inman, D. and Wilkie, W. 2002. "Manufacturing and Mechanics-based Characterization of Macro Fiber Composite Actuators," ASME Aerosp. Div. Publ. AD, 67:79-89.
33. Wise, S. 1998. "Displacement Properties of RAINBOW and THUNDER Piezoelectric Actuators," Sensors and Actuators A, 69(1):33-38.
34. Zhang, J., Hladky-Hennion, A., Hughes, W. and Newnham, R. 2001. "Modeling and Underwater Characterization of Cymbal Transducers and Arrays," IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 48(2):560-568.