Overview of Surface Treatment Methods for PM Parts

Advances in Powder Metallurgy and Particulate Materials

Volumn , Issue , 2001, Pages 1131-1162

  Bocchini, G Filippo ^a  

^a PM Consultant ^*  (Italy)

Author keywords

[No Author keywords available]

Indexed keywords

BOUNDARY LAYERS; COMPACTION; CORRELATION METHODS; COST EFFECTIVENESS; DENSIFICATION; DIFFUSION IN SOLIDS; IMPREGNATION; MICROSTRUCTURE; NITRIDING; POROSITY; SINTERING; STRENGTH OF MATERIALS; SURFACE ROUGHNESS; SURFACE TREATMENT; TRIBOLOGY;

MICRO-CAVITIES; THERMO-CHEMICAL TREATMENTS;

POWDER METALLURGY;

EID: 1642527458     PISSN: 10428860     EISSN: None     Source Type: Conference Proceeding    
DOI: None     Document Type: Conference Paper

References (96)

1. S. LAMPMAN: "Compressibility and Compactibility of Metal Powders", in Metals Handbook, Vol. 7, Powder Metal Technologies and Applications, ASM International, Materials Park, Ohio, 1998
2. G. F. BOCCHINI, "Principles of Metal Powder Compaction, EPMA PM School, Brunico (Italy), 1993
3. G. F. BOCCHINI: "Friction effects in metal powder compaction. Part one: theoretical aspects", Int. Conference on Powder Metallurgy and Particulate Materials, MPIF/APMI, Seattle, USA, May 1995
4. R. M. GERMAN: "Powder Metallurgy of Iron and Steel", John Wiley & Sons, Inc., New York, 1998
5. R. KIEFFER, W. HOTOP: "Sintereisen und Sinterstahl", Springer-Verlag, Wien, 1948, p. 126
6. G. F. BOCCHINI, V. FONTANARI, A. MOLINARI: "Friction effects in metal powder compaction. Part one: theoretical aspects", Int. Conference on Powder Metallurgy and Particulate Materials, MPIF/APMI, Seattle, USA, May 1995
7. P. F. LINDSKOG, G. F. BOCCHINI: "Development of High Strength P/M Precision Components in Europe", Int. Journal of Powder Metallurgy and Powder Technology, APMI/MPIF, Vol. 15, No 3, 1979
8. th European Symposium on Powder Metallurgy, 13 - 16 May, 1975, Grenoble (France)
9. W. BATEL: "Einführung in die Körngrössmesstechnik", Dritte Auflage, Springer-Verlag, Berlin, Heidelberg, New York, 1971
10. Y KOUSAKA, Y. ENDO: "Particle size", in Powder Technology Handbook, Second Edition, edited by K. Gotoh, H. Masuda and K. Higashitani, Marcel Dekker, Inc., New York, 1997
11. E. A. BRANDES, G. A. BROOk (Editors): Smithells Metals Reference Book", Butterworth Heinemann, Oxford, UK, 1998
12. G. F. BOCCHINI: "The influence of porosity on the characteristics of sintered materials", Reviews on Powder Metallurgy and Physical Ceramics", Vol. 2, No. 4, 1985
13. G. F. BOCCHINI: "Influence of porosity on the characteristics of sintered materials", The International Journal of Powder Metallurgy and Powder Technology, MPIF/APMI, Vol. 22, No. 3, 1986
14. J. HOLMES and R. A. QUENEY: Powder Metallurgy, Vol. 28, (1985) p. 231
15. H. DANNINGER, D. SPOLJARIC, B. WEISS, J. PREITFELLNER: "Microstructure-Property Relationships of a High Strength Sintered Steel", Advances in Powder Metallurgy and Particulate Materials, Vol. 5, J. M. Capus and R. M. German Editors, MPIF/APMI, Princeton, N.J., USA, 1992
16. M. SLESAR, E. DUDROVA, L. PARILAK, M. BESTERCI, E. RUDNAYOVA: "Influence of pressing and sintering conditions on microstructure formation of metallic porous systems", Science of Sintering, Vol.19, 1987, p. 17-30
17. V. P. CHOUGULE, G. S. TENDOLKAR: "Elastic Modulus and Ductility of Sintered Iron", Plansee-berichte fuer Pulvermetallurgie, 21 (1973), 3443
18. J. R. MOON: "Elastic Moduli of Powder Metallurgy Steels", Powder Metallurgy, 32, 1989, p. 132-139
19. B. WEISS, R. STICKLER: "High cycle fatigue behaviour of iron-based PM materials", Metal Powder Report, 45, 1990, p. 187-192
20. H. DANNINGER, G. JANGG, B. WEISS, R. STICKLER: "Microstructure and Mechanical Properties of Sintered Iron. Part I: Basic Considerations and Review of Literature", Powder Metallurgy International, Vol. 25, No. 3, 1993, p. 111-117
21. T. MARCU PUSKAS, A. MOLINARI: "Effetto della compattazione e della temperatura di sinterizzazione sulle proprietà di acciai al cromo-molibdeno", XXI Conv. Nazionale AIM, Milano, November 2000
22. G. F. BOCCHINI: "I trattamenti termici degli acciai sinterizzati", Chapter XVII of a Textbook and Course on "Criteria for the Choice and Treatment of Structural and Tool Steels", Brescia, 1979, October/November,
23. G. F. BOCCHINI: " I trattamenti termici degli acciai sinterizzati. Uno stato dell'arte", in Tecnica e Tecnologia, Notiziario Tecnico AMMA, Anno IX, Torino, 1996, Novembre
24. G. F. BOCCHINI: "How to design sintered steels for advanced applications", International Seminar on Principles and Methods of Engineering Design", Naples, Italy, 1-3 October 1997, Proc. p 239 - 266
25. P. A. HASSEL, N. V. ROSS: "Induction Heat Treating of Steel", ASM Handbook, Vol. 4, Heat Treating, ASM, Metals Park, Ohio, 1991
26. G. F. BOCCHINI: " Induction Hardening of PM steels", PM Seminar, Trento University, May 2000
27. G. F. BOCCHINI: "High Pressure Compaction, High Pressure Coining and High Pressure Repressing of P/M Parts", P/M World Conference, MPIF/APMI, June. 5-10 1988, Orlando, USA
28. C. M. SONSINO: "Schwindfestigkeit von Verschiedenen Sinterstahlen und Bemessungkriterien fuer Gesinterte Bauteile", Fraunhofer Institut fuer Betriebefestigkeit (LBF), Darmstadt, Bericht Nr. FB. 170, 1984
29. C. M. SONSINO: "Fatigue Design for Powder Metallurgy", PM '90 World Conference on Powder Metallurgy, European Powder Metallurgy Association, London, 2-6 July, 1990
30. C. M. SONSINO, G. SCHLIEPER, W. J. HUPPMANN: "How to improve the Fatigue Properties Of Sintered Steels by Combinred Mechanical and Thermal Surface Treatments", in Modern Developments in Powder Metallurgy, edited by E. N. Aqua and C. I. Whitman, MPIF/APMI, Princeton, Vol. 6 (1985), pp 33 - 49
31. C. M. SONSINO, F. MUELLER, V. ARNHOLD, G. SCHLIEPER: "Influence of Mechanical Surface Treatments on the Fatigue Properties of Sintered Steels under Constant and Variable Amplitude Loading", in Modern Developments in Powder Metallurgy, Proceedings of the 1988 P.M World Conference, P. U. Gummeson and D. A. Gustafson editors, MPIF/APMI, Princeton, N.J. (1988) Vol. 21, pp 55 - 66
32. D. TYLER: "Surface Pre-Stressing for Densification and Fatigue Strength Improvements". PM '90 World Conference on Powder Metallurgy, European Powder Metallurgy Association, London, 2-6 July, 1990
33. R. A. CHERNENKOFF: "The Effect of Cyclic Loading on the Residual Stresses of a Shot Peened Powder-Forged Steel", Proceeding of 1998 PM 1998 World Congress and Exhibition, EPMA, Vol. 2, 396 - 402
34. Y. TAKEYA, T. HAYASAKA, M. SUZUKI, A. KAMADA: "Surface rolling of Sintered Gears", SAE Technical paper No. 820234
35. C. M. SONSINO, J. TENGZELIUS, G. SCHLIEPER: "Influence of as-sintered material strength on the improvement of fatigue behaviour by surface rolling", PM '90 World Conference on Powder Metallurgy, European Powder Metallurgy Association, London, 2-6 July, 1990
36. P. K. JONES, R. LAWCOCK, K. BUCKLEY-GOLDER, R. SHIVANATH: "Densification Strategies For Advanced High Endurance Powder Metal Components", Advances in Powder Metal and Particulate Materials, T. Cadle and S. Narasimhan Editors, MPIF/APMI, Vol. 4, P/M World Conference, Washington
37. th Int. Symposium on Auto Tech & Automation, ISATA, Florence, Italy, June 1996
38. P. K. JONES, R. SHIVANATH, R. LAWCOCK: "Metallurgical strategies For High Strength High Endurance PM Components For Advanced Powertrain Applications", European Conference on Advancement in Structural PM Components Production, EPMA, October 1997, Munich, Germany
39. P. K. JONES, K. BUCKLEY-GOLDER, D. SARAFINCHAN: "Developing Powder Metal Gear Tooth and Bearing Surfaces for High Stress Applications", International Journal of Powder Metallurgy, Vol. 34, No. 1, p. 26, MPIF/APMI, 1998
40. P. K. JONES, K. BUCKLEY-GOLDER, R. LAWCOCK, R. SHIVANATH: "Fatigue Properties of Advancsd High Density Alloy Steels High Performance Powertrain Applications", Proceeding of 1998 PM World Congress and Exhibition, EPMA, Granada, Spain, October 1998
41. R. LAWCOCK, K. BUCKLEY-GOLDER, D. SARAFINCHAN: "Testing of High Endurance P/M Steels for Automotive Transmission Gearing Components", 1999-01-0293, SAE International Congress & Exp., Detroit, MI, USA, March 1999
42. D. SARAFINCHAN, P. K. JONES, K. BUCKLEY-GOLDER, H. DAVID: "Powder Metal Bearing & Gears With Steel LIKE Performance", 2001-01M-132, SAE International Congress & Exp., Detroit, MI, USA, March 2001
43. G. BONETTI, A. NAVAZIO, P. ZINGALE: "Gears for Demanding Applications. A Comparison Between Cast Iron, Wrought Steels and P/M Steels", SAE Technical Paper 2000-01-0405, SAE Powdered Metal Applications (SP-1535), SAE Congress, Detroit, MI, USA, March 2000
44. R. NAIDU, S. ASHOK, P. KRISNA KUMAR: "Modelling of Selective Full Densification of PM Parts", Proceeding of 1998 PM World Congress and Exhibition, EPMA, Granada, Spain, October 1998 Proceedings, Vol. 2, (126 - 131)
45. C. KOLE, UK Patent GB 2,250,227
46. P. K. JONES, ... "Method of Producing Bearings", US Patent 5,540.883
47. P. K. JONES, ... "Gear Wheels Rolled from Powder", US Patent 5,711.087
48. KAZIOR Private communication
49. F. V. LENEL: "Steam Treatment of Porous Iron", Powder Metallurgy, J. Wulf (Editor), Cleveland, Ohio, 1942, p. 512
50. F. W. REGEL: "Die Amvendund des Dampfbehandlungsverfahrens bei Gesinterten Eisenteilen", Werkstatt und Betrieb, Vol. 96, No. 8, 1963
51. P. FRANKLIN, B. L. DAVIES: "The Effects of Steam Oxidation on Porosity in Sintered Iron", Powder Metallurgy, No. 1, 1977 (11 - 16)
52. P. FRANKLIN, B. L. DAVIES: "The Effects of Steam Oxidation on Porosity in Sintered Iron", Powder Metallurgy, No. 4, 1979 (187 - 192)
53. K. KAZAVIZADEH, F. DAVIES: "Influence of Powder Type and Density on Pore Closure and Surface Hardness Changes Resulting from Steam treatment of Sintered Iron", Powder Metallurgy, No. 4, 1979, (193 - 198)
54. nd International Congress on Heat Treatment of Materials, AIM, Florence, Italy, 20 - 24 April, 1982, Proceedings, 1091 - 1102
55. J. H. REGGLESTON, R. D. FISHER: "Steam Treatment of Iron Powder Metal Parts" Progress in Powder Metallurgy, Volume 38, MPIF/APMI, 1982, (613 - 619)
56. P. BEISS: "Steam Treatment of Sintered Parts", PM International Conference, EPMA, London, UK, 1990 July 2-7, Volume 1, p 448 - 496
57. G. F. BOCCHINI: "Steam Treatment of Ferrous P/M Parts. A State of the Art", PM World Congress, MPIF/APMI, June 21 - 26, 1992, San Francisco
58. V. AMICARELLI, G. F. BOCCHINI, G. BOGHETICH, L. CENTO: "The manganizing process. Comparison between PM and conventional steels", 2nd International Congress on Heat treatment of Materials, AIM, Florence (Italy), 20-24 September, 1982
59. V. AMICARELLI, G. F. BOCCHINI, G. BOGHETICH, L. CENTO: "Manganese Diffusion Coatings of Same Wrought and Sintered Steels", Journal of Heat Treating, ASM, Vol. 3, No 4, 1984
60. H. CHANDLER (Editor): "Heat Treater's Guide. Practices and Procedures for Irons and Steels", ASM International, Materials Park, Ohio, 1995
61. H. E. BOYER, T. L. GALL (Editors): "Metals Handbook, Desk Edition", ASM, Metals Park, Ohio, 1985
62. D. T. LLEWELLYN, R. C. HUDD: "Steels, Metallurgy and Applications", Third Edition, Butterwort Heinemann, Oxford, 1998
63. H. E. BOYER (Editor): "Case Hardening of Steels", ASM International, Metals Park, Ohio, 1987
64. P. L. CAVALLOTTI, D. COLOMBO, G. MANGIACAVALLI, G. F. BOCCHINI, A. MANCUSO: "Ferritic nitrocarburizing of iron sintered parts", 2nd International Congress on Heat treatment of Materials, Florence (Italy), 20-24 September, 1982, la metallurgia italiana, No. 11, 1983
65. M. ROSSO, G. SCAVINO, G. UBERTALLI: "Nitrocarburizing of P/M Steels", 1993 Powder Metallurgy lurgy World Congress, Japan Society of Powder and Powder Metallurgy, Kyoto, Japan, July 12-15, 1993
66. K. T. RIE, T. LAMPE, S. EISENBERG: "Surface treatment of P/M materials by plasma nitrocarburizing", P/M 86, Int. Powder Metallurgy Conference and Exhibition, EPMA, Duesseldorf, Horizons of Powder Metallurgy, Part 1, Verlag Schmid GMBH, Freiburg, 1986 (361 - 364)
67. J. A. BAS, C. MOLINS: "Nitriding applied to P/M parts", P/M 86, Int. Powder Metallurgy Conference and Exhibition, EPMA, Duesseldorf, Horizons of Powder Metallurgy, Part 1, Verlag Schmid GMBH, Freiburg, 1986 (365 - 368)
68. V. MANOLACHE, G. SCHLIEPER, W. REMBGES: "Mechanical and Wear Properties of Ionitriered Cr-Mo Sintered Steels", P/M 86, Int. Powder Metallurgy Conference and Exhibition, EPMA, Duesseldorf, Horizons of Powder Metallurgy, Part 1, Verlag Schmid GMBH, Freiburg, 1986 (377 - 380)
69. Y. T. CHEN: "Surface Treatment of P/M Steels by Ion-nitriding", Progress in Powder Metallurgy, (APMI/MPIF), Vol. 43, 1987 (539 - 550)
70. B. LINDQVIST: "A molybdenum-alloyed P/M steel for surface hardening", London P/M 90, World Conference on Powder Metallurgy, EPMA, 2-6 July, 1990, Proceedings, Vol. 2, (170 - 177)
71. G. F. BOCCHINI, A. MOLINARI, B. TESI, T. BACCI: "The ion-nitriding of sintered steels. Present situation and perspectives", Metal Powder Report, November, 1990
72. A. MOLINARI, G. PRADELLI, T. BACCI, B. TESI, G. F. BOCCHINI: "Leghe sinterizzate Fe-Mo, Fe-Mo-C: Comportamento nel Trattamento di Nitrurazione in Scarica Ionica", la metallurgia italiana, AIM, Vol. 84, No. 3, 1992 (243 - 248)
73. G. F. BOCCHINI, M. G. IENCO, G. PALOMBARINI, M. R. RINASCO, E. STAGNO: "Ion nitriding and gas nitriding of homogeneous, low and high alloy, Mo, Cr and Ni/Cr sintered steels", 1993 Powder Metallurgy World Congress, Japan Society of Powder and Powder Metallurgy, Kyoto, Japan, July 12-15, 1993
74. K. ISHII, Y. IKENOUE, T. TSUTUNI: "Plasma carbiirised P/M low alloy steels with high fatigue strength", 1993 Powder Metallurgy World Congress, Japan Society of Powder and Powder Metallurgy, Kyoto, Japan, July 12- 15, 1993
75. A. ŠALAK: "Ferrous Powder Metallurgy", Cambridge International Science Publishing, Cambridge, England, 1995, p 297
76. G. SCAVINO, M. Rosso: "Comparison of properties of surface hardened P/M steels by vacuum carburizing", 1993 Powder Metallurgy World Congress, Japan Society of Powder and Powder Metallurgy, Kyoto, Japan, July 12 - 15, 1993
77. H. WEISS: "Aufkohlung und Härtung von Sintereisen-Werkstoffen", Forschungsberichte der Landes Nordrhein-Westfalen, No. 799, Köln und Hopladen, 1960
78. H. E. BOYER: "Secondary Operations Performed on P/M Parts and Products", Powder Metallurgy, Vol. 7, ASM Handbook, Ninth Edition, ASM, Metals Park, Ohio, USA, 1984
79. H. A. FERGUSON: "Heat Treatment of PM Parts", Metal Progress, Vol. 7, (No. 6), 1975 p 81-83
80. H. A. FERGUSON: "Heat Treating of Powder Metallurgy Steels", Heat Treating, Vol. 4, ASM Handbook, Tenth Edition, ASM International, 1991, p 229-236
81. H. A. FERGUSON: "Heat Treatment of Ferrous Powder Metallurgy Parts", Powder Metal Technologies and Applications, Vol. 7, ASM Handbook, Tenth Edition, ASM International, 1998, p 645-655
82. M. FEIR: "Posttreatment of P/M Parts", SAE Congress and Exposition, Detroit, February 25 - 29, 1980, SAE Technical Paper 800308
83. P. LINDSKOG, O. THORNBLAD: "Ways to improve the strength of sintered components made from partially prealloyed steel powders", P/M SEMP, Stockhohn, 4-8 June, 1978, Proceedings, p 98 - 103
84. F. V. LENEL: "Powder Metallurgy, Principles and Applications", Metal Powder Industries Federation, Princeton, New Jersey, 1980, p 438
85. G. F. BOCCHINI, M. G. IENCO, A. NAVAZIO, M. R. PINASCO, G. SILVA, B. RIVOLTA, E. STAGNO: "Physical and Mechanical Properties, Microstructure and Fractography of a P/M Steel from Diffusion-Bonded Powder, Differently Sintered or Heat Treated", PM2 International Conference, APMI/MPIF, New York City, June 2000
86. J. R. BONSKY: "Planning and Quality Control of Powder Metallurgy Parts Production", Powder Metal Technologies and Applications, Vol. 7, ASM Handbook, Tenth Edition, ASM International, 1998, p 697-698
87. H. E. BOYER: "Secondary Operations Performed on P/M Parts and Products", Powder Metallurgy, Vol. 7, ASM Handbook, Ninth Edition, ASM, Metals Park, Ohio, 1984, p 460
88. A. ŠALAK: "Ferrous Powder Metallurgy", Cambridge International Science Publishing, Cambridge, England, 1995, p 331
89. G. F. BOCCHINI: "The Influence of Porosity on the Characteristics of Sintered Materials", SAE Technical Paper No. 860148, SAE Int. Congress, Detroit, 1986
90. G. F. BOCCHINI: "The Influence of Porosity on the Characteristics of Sintered Materials", Metal Powder Report, Elsevier, 1986, Vol. 41, No. 11, pp 829 - 832
91. R. TALMAGE: "A New Look at Hardness-Strength Relationships in Sintered Steels", Progress in Powder Metallurgy, Proceedings National Conference, MPIF, Cleveland, Ohio, 1961, Vol. 17, pp 168-175
92. G. F. BOCCHINI: "Le contrôle des caractéristiques de dureté des aciers frittés et traités", Fourth European Symposium for Powder Metallurgy, Grenoble, France, May 1975, Vol. 1, pp 1-2-1 - 1-2-6
93. G. F. BOCCHINI, G. SILVA: "Wrought steels, cast irons, P/M steels: property comparison for design purposes", P/M International Conference, APMI/MPIF, Las Vegas. USA, June 1998
94. M. LOHRMANN, W GRAEFEN: "New Wrinkles in Low-Pressure Carburizmg", Heat Treating Progress, February/March 2001, pp 47 - 51
95. J CAPUS, H. FERGUSON: "Getting the Best From P/M Heat Treating, Part one", Metal Powder Report, Vol. 50, No. 4, 1995, Elsevier, pp 33 - 36
96. J. CAPUS, H. FERGUSON: "Getting the Best From P/M Heat Treating, Part two", Metal Powder Report, Vol. 50, No. 5, 1995, Elsevier, pp 38 - 43