The structure of wall-impinging jets: Computed versus theoretical and measured results

Journal of Fluids Engineering, Transactions of the ASME

Volumn 125, Issue 6, 2003, Pages 997-1005

  Song, Lijun ^a   Abraham, John ^a  

^a PURDUE UNIVERSITY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

MATHEMATICAL MODELS; REYNOLDS NUMBER; TURBULENCE; VELOCITY MEASUREMENT;

RADIAL VELOCITY; ROUND FREE JETS; WALL-IMPINGING JETS;

JETS;

EID: 1642454911     PISSN: 00982202     EISSN: None     Source Type: Journal    
DOI: 10.1115/1.1625686     Document Type: Article

References (39)

1. Martin, H., 1977, "Heat and Mass Transfer between Impinging Gas Jets and Solid Surfaces," Adv. Heat Transfer, 13, pp. 1-60.
2. Beltaos, S., and Rajaratnam, N., 1972, "Impinging Circular Turbulent Jets," J. Hydraul. Div., Am. Soc. Civ. Eng., 100, pp. 1313-1328.
3. Fujimoto, H., Nogami M., Hyun G., Nogami, M., Hirakawa, K., Asai, T., and Senda, J., 1997, "Characteristics of Free and Impinging Gas Jets by Means of Image Processing," SAE Paper 970045.
4. Jambunathan, K., Lai, E., Moss, M. A., and Button, B. L., 1992, "A Review of Heat Transfer Data for Single Circular Jet Impingement," Int. J. Heat Fluid Flow, 13, pp. 106-115.
5. Goldstein, R. J., and Franchett, M. E., 1988, "Heat Transfer From a Flat Surface to an Oblique Impinging Jet," ASME J. Heat Transfer, 110, pp. 84-90.
6. Dec, J. E., and Tree, D. R., 2001, "Diffusion-Flame/Wall Interactions in a Heavy-Duty DI Diesel Engine," SAE Paper 2001-01-1295.
7. Kittelson, D. B., Ambs, J. L., and Hadjkacem, H., 1990, "Particulate Emissions From Diesel Engines - Influence of In-Cylinder Surface," SAE Trans., 99, pp. 1457-1472.
8. Song, L., and Abraham, J., 2001, "Effect of Injector Hole Size, Number and Orientation on Diesel Engine Emissions," Proceedings of the Second Joint Meeting of the US Sections of the Combustion Institute, Oakland, CA, The Combustion Institute, Pittsburgh, PA.
9. Iyer, V. A., Post, S., and Abraham, J., 2000, "Is the Liquid Penetration in Diesel Sprays Mixing Controlled?" Proceedings of 28th Combustion Institute, The Combustion Institute, Pittsburgh, PA, pp. 1111-1118.
10. Iyer, V. A., Abraham, J., and Magi, V., 2002, "Exploring Injected Droplet Size Effects on Steady Liquid Penetration in a Diesel Spray With a Two-Fluid Model," Int. J. Heat Mass Transfer, 45, pp. 519-531.
11. Post, S., and Abraham, J., 2001, "A Computational Study of the Processes That Affect the Steady Liquid Penetration in Full-Cone Diesel Sprays," Combust. Sci. Technol., 165, pp. 1-40.
12. Siebers, D., 1998, "Liquid Phase Fuel Penetration in Diesel Sprays," SAE Paper 980809.
13. Bakke, P., 1957, "An Experimental Investigation of a Wall Jet," J. Fluid Mech., 2, pp. 467-472.
14. Tanaka, T., and Tanaka, E., 1977, "Experimental Studies of a Radial Turbulent Jet (2nd Report, Wall Jet on a Flat Smooth Plate)," Bull. JSME, 20, pp. 209-215.
15. Poreh, M., Tsuei, Y. G., and Cermak, J. E., 1967, "Investigation of a Turbulent Radial Wall Jet," ASME J. Appl. Mech., 34, pp. 457-463.
16. Witze, P. O., and Dwyer, H. A., 1977, "Impinging Axisymmetric Turbulent Flows: The Wall Jet, the Radial Jet and Opposing Free Jets," Proceedings of the 1st Symposium on Turbulent Shear Flows, Pennsylvania, pp. 2.33-2.39.
17. Launder, B. E., and Rodi, W., 1983, "The Turbulent Wall Jet-Measurements and Modeling," Annu. Rev. Fluid Mech., 15, pp. 429-459.
18. Tomita, E., Hamamoto, Y., Tsutsumi, H., Takasaki, S., Watanabe, T., and Yoshiyama, S., 1995, "Visualization of Ambient Air Motion and Entrainment Into a Transient Gas Jet Impinging on a Flat Wall," SAE Paper 952513.
19. Glauert, M. B., 1956, "The Wall Jet," J. Fluid Mech., 1, Part 6, pp. 625-643.
20. Patankar, S. V., and Spalding, D. B., 1967, Heat and Mass Transfer in Boundary Layers, Morgan-Grampian, London.
21. Magi, V., 1987, "A New 3-D Code for Flows, Sprays, and Combustion in Reciprocating and Rotary Engines," Mechanical and Aerospace Engineering Report, No. 1793, Princeton University, Princeton, NJ.
22. Iyer, V., and Abraham, J., 1998, "The Computed Structure of a Combusting Transient Jet Under Diesel Conditions," SAE Trans., 107, pp. 1669-1693.
23. Abraham, J., and Magi, V., 1998, "A Model for Multicomponent Droplet Vaporization in Sprays," SAE Trans., 107, pp. 603-613.
24. Post, S., Iyer, V., and Abraham, J., 2000, "A Study of Near-Field Entrainment in Gas Jets and Sprays Under Diesel Conditions," ASME J. Fluids Eng., 122, pp. 385-395.
25. Launder, B. E., and Spalding, D. B., 1974, "The Numerical Computation of Turbulent Flows," Comput. Methods Appl. Mech. Eng., 3, pp. 269-289.
26. Yakhot, V., Orszag, S. A., Thangam, S., Gatski, T. B., and Speziale, C. G., 1992, "Development of Turbulence Models for Shear Flows by a Double Expansion Technique," Phys. Fluids A, 4, pp. 1510-1520.
27. Abraham, J., and Magi, V., 1997, "Computation of Transient Jets: RNG k-ε Model Versus Standard k-ε Model," SAE Trans., 106, pp. 1442-1452.
28. Chien, K. Y., 1982, "Predictions of Channel and Boundary-Layer Flows With a Low-Reynolds-Number Turbulent Model," AIAA J., 20, pp. 33-38.
29. Launder, B. E., and Sharma, B. I., 1974, "Application of Energy Dissipation Model of Turbulence to the Calculation of Flow Near a Spinning Disc," Lett. Heat Mass Transfer, 1, pp. 131-138.
30. Jones, W. P., and Launder, B. E., 1972, "The Prediction of Laminarization With a Two-Equation Model of Turbulence," Int. J. Heat Mass Transfer, 15, pp. 301-314.
31. Lam, C. K. G., and Bremhorst, K. A., 1981, "Modified Form of the k-ε Model for Predicting Wall Turbulence," ASME J. Fluids Eng., 103, pp. 456-460.
32. Patel, V. C., Rodi, W., and Scheuerer, G., 1985, "Turbulence Models for Near-Wall and Low-Reynolds Number Flows: A Review," AIAA J., 23, pp. 1308-1319.
33. Wilcox, D. C., 1998, Turbulence and Modeling for CFD, 2nd Ed., DCW Industries.
34. Iyer, V., and Abraham, J., 1997, "Penetration and Dispersion of Transient Gas Jets and Sprays," Combust. Sci. Technol., 130, pp. 315-334.
35. Schlichting, H., 1987, Boundary Layer Theory, McGraw-Hill, New York.
36. Abraham, J., 1996, "Entrainment Characteristics of Transient Gas Jets," Numer. Heat Transfer, 30, pp. 347-364.
37. Magi, V., Iyer, V., and Abraham, J., 2001, "The k-ε Model and Computed Spreading Rates in Round and Plane Jets," Numer. Heat Transfer, 40, pp. 317-334.
38. Abraham, J., and Bracco, F. V., 1989, "Fuel-Air Mixing and Distribution in a Direct-Injection Stratified Charge Rotary Engine," SAE Trans., 98, pp. 515-526.
39. Abraham, J., Khan, A., and Magi, V., 1999, "Jet-Jet and Jet-Wall Interactions of Transient Jets From Multi-Hole Injectors," SAE Paper 1999-01-0513.