Calculation of two-axis induction motor model parameters using finite elements

IEEE Transactions on Energy Conversion

Volumn 12, Issue 2, 1997, Pages 133-140

  Dolinar, D ^a,b   De Weerdt, R ^c   Belmans, R ^a,c   Freeman, E M ^d  

^a IEEE   (Slovenia)

^b UNIVERSITY OF MARIBOR   (Slovenia)

^c UNIVERSITY OF LEUVEN   (Belgium)

^d IMPERIAL COLLEGE LONDON   (United Kingdom)

Author keywords

Finite Elements; Induction Motors; Parameter Calculation; Two axis Models

Indexed keywords

FINITE ELEMENT METHOD; INDUCTANCE MEASUREMENT; MATHEMATICAL MODELS; ROTORS; VECTORS;

FLUX DISTRIBUTION; STATIC NONLINEAR VECTOR POTENTIAL SOLUTION; TWO AXIS MODELS;

INDUCTION MOTORS;

EID: 0031169968     PISSN: 08858969     EISSN: None     Source Type: Journal    
DOI: 10.1109/60.629695     Document Type: Article

References (30)

1. T. W. Nehl, F. A. Fouad, and N. A. Demerdash, "Determination of saturated values of rotating machinery incremental and apparent inductances by an energy perturbation model," IEEE Transactions on Power Apparatus and Systems, no. PAS-101:12, pp. 4441-4449, 1992.
2. M. V. Chari and P. Silverster, "Analysis of turboalternator magnetic fields by finite elements," IEEE Transactions on Power Apparatus and Systems, no. PAS-90:2, pp. 454-462, 1971.
3. M. V. K. Chari, S. H. Minnich, S. C. Tandon, Z. J. Csendes, and J. Berkery, "Load characteristics of synchronous generators by the finite-element method," IEEE Transactions on Power Apparatus and Systems, no. PAS-100:1, pp. 1-9, 1981.
4. S. Williamson, "Induction motor modelling using finite elements," in Proceedings of a ICEM/94, (Paris), pp. 1-8, September 1994.
5. S. Williamson and J. W. Ralph, "Finite-element analysis of an induction motor fed from a constant-voltage source," IEE PROC, vol. 130, Pt. B, no. 1, pp. 18-24, 1983.
6. S. Williamson and M. C. Begg, "Analysis of cage induction motors - A combined fields and circuits approach," IEEE Transactions on Magnetics, vol. MAG-21, no. 6, pp. 2396-2399, 1985.
7. S. Williamson, L. H. Lim, and A. C. Smith, "Transient analysis of cage-induction motors using finite-elements," IEEE Transactions on Magnetics, vol. 26, no. 2, pp. 941-944, 1990.
8. S. Williamson, L. H. Lim, and M. J. Robinson, "Finite-element models for cage induction motor analysis," IEEE Transactions on Industry Applications, vol. 26, no. 6, pp. 1007-1017, 1990.
9. S. Williamson and M. J. Robinson, "Calculation of cage induction motor equivalent circuit parameters using finite elements," IEE Proceedings-B, vol. 138, no. 5, pp. 264-276, 1991.
10. N. A. Demerdash and P. Baldassari, "A combined finite element-state space modeling environment for induction motors in the abc frame of reference: The no-load condition," IEEE Transactions on Energy Conversion, vol. 7:4, pp. 698-709, 1992.
11. P. Baldassari and N. A. Demerdash, "A combined finite element-state space modeling environment for induction motors in the abc frame of reference: The blocked-rotor and sinusoidally energized load conditions," IEEE Transactions on Energy Conversion, vol. 7:4, pp. 710-720, 1992.
12. E. Vassent, G. Meunier, A. Foggia, and G. Reyne, "Simulation of induction machine operation using a step by step finite element method coupled with circuits and mechanical equations," IEEE Transactions on Magnetics, vol. 27, no. 6, pp. 5232-5234, 1991.
13. A. Arkkio, "Finite element analysis of cage induction motors fed by static frequency converters," IEEE Transactions on Magnetics, vol. 26, no. 2, pp. 551-554, 1990.
14. T. W. Preston, A. B. J. Reece, and P. S. Sangha, "Inductionmotor analysis by time-stepping techniques," IEEE Transactions on Magnetics, vol. 24, no. 1, pp. 471-474, 1988.
15. R. Belmans, R. D. Weerdt, and E. Tuinman, "Combining field analysis techniques and macroscopic parameter simulation for describing the behavior of medium sized squirrel-cage induction motors fed with arbitrary voltage," in Proceedings of the 5th European Conference on Power Electronics and Application, (Brighton, U.K.), pp. 413-418, Sept. 13-16, 1993.
16. R. Belmans, R. R. D. Findlay, and W. Geysen, "A circuit approach to finite element analysis of a double squirrel cage induction motor," IEEE Transactions on Energy conversion, vol. 5, no. 6, pp. 719-724, 1990.
17. R. W. A. A. De Doncker, "Field-oriented controllers with rotor deep bar compensation circuits," IEEE Transactions on Industry Applications, vol. 28, no. 5, pp. 1062-1071, 1992.
18. P. Vas, Electrical Machines and Drives. Oxford: Clarendon Press, 1992.
19. S. Williamson, T. J. Flack, and A. F. Volschenk, "Representation of skew in time-stepped two-dimensional finite-element models of electrical machines," IEEE Transactions on Industry Applications, vol. 31, no. 5, pp. 1009-1015, 1995.
20. S. Williamson and A. F. Volschenk, "Time-stepping finite-element analysis for a synchronous generator feeding a rectifier load," IEE Proc.-Electr. Power Appl. Transactions on Industry Applications, vol. 142, no. 1, pp. 50-56, 1995.
21. R. C. Healey, S. Williamson, and A. C. Smith, "Improved cage rotor models for vector controlled induction motors," IEEE Trans. on IA, vol. 31, no. 4, pp. 812-822, 1995.
22. A. Levi, Field oriented control of induction machines in the presence of magnetic saturation. PhD thesis, Electrotechnical Faculty Beograd, 1990.
23. G. Štumberger and D. Dolinar, "Two-phase model of an induction machine considering the magnetization curve," in Proceedings of a ERK'92, (Portorož, Slovenia), pp. 115-118, September 1992.
24. D. A. Lowther and P. P. Silvester, Computer-Aided Design in Magnetics. Berlin: Springer-Verlag, 1986.
25. R. Richter, Elektrische Machinen. Basel und Stuttgart: Birkhäuser Verlag, 1967.
26. S. Williamson and M. C. Begg, "Calculation of the resistance of induction motor end rings," IEE Proceedings, vol. 133, Pt. B, no. 2, pp. 54-60, 1986.
27. Infolytica, MagNet Users manual for release 5.0. Canada, 1993.
28. B. Hribernik, V. Goričan, A. Hamler, and B. Kreča, "Experience with small single sheet tester," in Proceedings of the Soft Magnetic Materials Conference, pp. 54-64, 1993.
29. B. Hribernik and B. Slemnik, "Experience with CAD of small electrical machines," in Proceedings of the International conference Design to Manufacture in Modern Industry, vol. 2, (Bled, Slovenia), pp. 641, 1993.
30. L. Kumin, K. Jezernik, and D. Dolinar, "Input-output linearizing control of an induction motor," Electrotechnical Review, vol. 62, no. 5, pp. 286-294, 1995.