Thermal barrier coatings - Why, how, where and where to

Proceedings of the International Thermal Spray Conference

Volumn 2, Issue , 1998, Pages 1531-1542

  Wigren, J ^a   Pejryd, L ^a  

^a VOLVO AERO CORPORATION   (Sweden)

Author keywords

[No Author keywords available]

Indexed keywords

DIESEL FUELS; ENERGY EFFICIENCY; GAS TURBINES; PERFORMANCE; PLASMA SPRAYING; THERMAL CONDUCTIVITY; TURBOMACHINE BLADES;

TEMPERATURE GRADIENTS; THERMAL EFFICIENCY;

THERMAL BARRIER COATINGS;

EID: 1442354709     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: None     Document Type: Conference Paper

References (57)

1. Volvo Materials Data File, VAC 9350-91-275E
2. "Jane's AERO-ENGINES", Edited by Gunston B, ISBN 0710614055.
3. I Kvernes "Thermal Barrier Coatings in Internal Combustion Engines" presented at Interfacial Engineering of Materials in Castelvecchio Pascoli, Italy 9-14 October 1996
4. Lefebvre A.H, "Gas Turbine Combustion", ISBN 0-89116-896-6.
5. Calculated by Jens Dahlin at Volvo Aero Corporation
6. 2 Coatings Sprayed under Varying Conditions", Proceedings of the NTSC' 90 in Long Beach and in Prakt. Met. 5 (1991),pp.222-227
7. D.M Gagnon, G.A. Blann "Thermal Spray Coating Impregnation - Vacuum vs. High Pressure/Vacuum Technique" Thermal Spray Industrial Applications, C.C Berndt and S. Sampath. Published by ASM International, Materials Park, Ohio, USA, 1994. Proceedings of NTSC'94,pp.743-750.
8. S Sampath, J Matejicek, C.C Berndt, H Herman, A-C Leger, M Vardelle, A Vardelle; P Fauchais "Plasma Sprayed Zirconia: Relationships among Particle Parameters, Splat Formation, and Deposit Generation - Part II: Microstructure and Properties" in Practical Solutions for Engineering Problems, C.C Berndt, Published by ASM International, Materials Park, Ohio-USA, 1996. Proceedings of NTSC'96,pp.629-636.
9. R. McPhersson, "Overview of Microstructure and Properties of Plasma Sprayed Ceramic Coatings", Surface and Coatings Technology, 39/40 (1989) pp.173-181.
10. P Bengtsson, T Johannesson "Characterisation of Microstructural Defects in Plasma Sprayed Thermal Barrier Coatings" Journal of Thermal Spray Technology Volume 4 (3) September 1995 pp. 245f
11. S Sampath, J Matejicek, C.C Berndt, H Herman, A-C Leger, M Vardelle, A Vardelle; P Fauchais "Plasma Sprayed Zirconia: Relationships Between Particle Parameters, Splat Formation, and Deposit Generation - Part 1: Impact and solidification" in Practical Solutions for Engineering Problems, C.C Berndt, Published by ASM International, Materials Park, Ohio-USA, 1996. Proceedings of NTSC'96, pp. 623 -628.
12. R.F Firestone, W.R Logan and J.W Adams "Creep of Plasma Sprayed Zirconia" NASA CR 167868 (1982)
13. A.-C. Leger "Contribution à l'ètude expèrimentale de la formation de lamelles de zircone, de leur empilement, et des contraintes rèsiduelles de dépôts projetés par plasma" PhD Thesis, University of Limoges(1997), France.
14. J F de Vries "Air Plasma Sprayed Thermal Barrier Coatings, Microstructure, residual stresses, preoxidation and thermal shock resistance" Master Thesis, Volvo Report 9940-199 (1996) Supervisor: Jan Wigren
15. Pikkemaat, "Cracks and stresses in ceramic layers", a designers course report, Laboratory of Materials Science, Delft University of Technology, May 1995
16. Wigren J, Graving D. (TU), deVries J-F, "Effects of Powder Morphology, Microstructure and Residual Stresses on the Thermal Shock Life of Thin Thermal Barrier Coatings" Proceedings of NTSC'96 in Cincinnati, pp.855-861.
17. Measured by V. Arnault and J. Brassier at Snecma, Materials and Process Department.
18. Results obtained through the Brite-Euram project "COMBCOAT" (BE7287-95, BRE2-CT94-0936)
19. A Haddadi, A Grimaud, A Denoirjean, F Nardou, P Fauchais "Crystalline Growth within Alumina and Zirconia Coatings with Coating Temperature Control during Spraying" Practical Solutions for Engineering Problems, C.C Berndt, Published by ASM International, Materials Park, Ohio-USA, 1996. Proceedings of NTSC'96, pp.615-622.
20. J Wigren, J Dahlin, M-O Hansson "A Combustor Can with 1.8 mm Thick Plasma Sprayed Thermal Barrier Coating" to be published at ASME98 in Stockholm.
21. Measured by Dr Dirk Schwingel at Manchester Materials Science Centre, University of Manchester and UMIST within the Brite-Euram project "COMBCOAT" (BE7287-95, BRE2-CT94-0936)
22. Kokini K and Reynolds R.," Transient Heating vs. Cooling of Interfacial Cracks in Ceramic-to-Metal Bonds" Engineering Fracture Mechanics Vol. 38, No. 6, pp. 371-383, 1991.
23. Murakawa H and Ueda Y "Effect of Singularity in Stress Field on Optimum Shape of Ceramic/Metal Joint" Transactions of JWRI (1991) published by Welding Research Institute of Osaka University, Ibaraki, Osaka 567, Japan, pp.109-115.
24. Nied H.A., "Edge Crack Stress Intensity Factors in Layered Ceramic-Metal Composites Due to Thermal Mismatch" Conference Proceedings of the International Conference and Exhibits on Failure Analysis, 8-11 July 1991, Montreal, Quebec, Canada, pp. 59-68.
25. T Kruslind "Advanced TBC:s Oxidation of the bond coat in plasma sprayed thermal barrier coatings" Master Thesis. Volvo Internal Report 9940-115 (1995)
26. D. Zhu, R.A. Miller "Evaluation of Oxidation Damage in Thermal Barrier Systems", NASA TM 107360. Technical Report ARL-TR-1254 (1996)
27. W.J. Brindley, R.A Miller "Thermal Barrier Coating Life and Isothermal Oxidation of Low-Pressure Plasma-Sprayed Bond Coat Alloys" Surface and Coating Technology, 43/44 (1990) pp. 446-457.
28. 3/ Ni-22Cr-10Al-1Y Thermal Barrier Coatings" J. Am. Ceram. Soc. 72 (2) 212-18 (1989)
29. T. DeMasi, K. D. Sheffler and M. Ortiz, "Thermal Barrier Coating Life prediction model development Phase 1-Final report", NASA Lewis Research Center, December 1989
30. J Wigren, L Pejryd, P Gougeon, C Moreau "Effect Of In-Flight Particle Characteristics on the Properties Of Plasma Sprayed NiCrAlY&NiCoCrAlY" to be presented at ITSC98 in Nice
31. J.A Haynes, M.K. Ferber, W.D. Porter, "Isothermal and Cyclic Oxidation of an Air Plasma Sprayed TBC System" ASME 96-GT-286 (1996)
32. K Schmalz "Isothermal Oxidation of HVOF sprayed NiCoCrAlY Overlay and Bondcoatings", Master of Science Thesis at Delft University oif Technology and Volvo Aero Corporation (1997). Supervisor: L Pejryd
33. R.C Novak, A.P Matarese, R.P. Huston, A.J Scharman, T.M Yonushonis "Development of Thick Thermal Barrier Coatings for Diesel Applications" Materials and Manufacturing Processes, 7 (1), 15-30 (1992).
34. D.R Arenas, W.J Brindley, L.B Temples, D.A Koss "Low Coefficient of Thermal Expansion Bond Coatings For TBC:s" poster presented at the TBC Workshop in Cincinnati 1997 arranged by NASA Lewis Research Center.
35. W J Brindley "Properties of Plasma-Sprayed Bond Coats" Journal of Thermal Spray Technology, Volume 6(1) March 1997
36. E. Kreyszig "Advanced Engineering Mathematics" Third Edition, 1972. Published by John Wiley and Sons, Inc.
37. R.B. Dinwiddie, S.C. Beecher, W.D. Porter, B.A. Nagaraj "The Effect of Thermal Aging on the Thermal Conductivity of Plasma Sprayed and EB-PVD Thermal Barrier Coatings", ASME 96-GT-282
38. H.E. Eaton, J.R. Linsey, R.B. Dinwiddie "The Effect of Thermal Aging on the Thermal Conductivity of Plasma Sprayed Fully Stabilised Zirconia" Thermal Conductivity 22, ed. by T.W. Long, Technomic Pub. Co. Inc., Lancaster, PA., pp289 - 300, 1994
39. HITS, Brite-Euram Contract 3226-96, BRPR CT96-0338
40. D Brouillant D, E Max "Non destructive testing of Ceramic Coatings. A laser Pulse Technique." Master Thesis at Volvo TU, Gothenburg Supervised by Erland Max(1995).
41. M Karlsson "Influence of different plasma spray parameters on thermal barrier coatings" Master Thesis, Volvo Internal Report 9350-5100 (1991) Supervisor: Jan Wigren
42. J Svantesson "Investigation on the effect of zirconia powder morphology on sprayability and coating characteristics" Volvo Internal Report 9350-5509 (1992)
43. Professor Roy Taylor at Manchester Materials Science Centre, University of Manchester and UMIST
44. G.C Gualco, A. Campora, R. Taylor, D Schwingel and S. Oswald "Highly Porous Thick Thermal Barrier Coatings Produced by Air Plasma Spraying of a Plastic-Ceramic Mixed Powder, to be presented at UTSC'97 in Indianapolis
45. S. Kuroda, T. Clyne, "The Quenching Stress in Thermally Sprayed Coatings", Thin Solid Films, Vol. 200, 1991, p 49-61.
46. Wigren J., Pejryd L., Gudmundsson B (ABB), Greving D (TU), McGrann R. (TU), Shadley J. and Rybicki E. (TU), "Process and In - Service Residual Stresses in Thermal Barrier Systems" Proceedings of NTSC'96 in Cincinnati, pp. 847-854.
47. G Jönsson, C Persson "Analysis of the Stress State in Thermal Barrier Coatings during a Thermal Cycle" Proceedings of NTSC'96 in Cincinnati, pp. 897ff.
48. L Pejryd, J Wigren, N Hanner " The Ultimate Spray Booth" to be presented at UTSC'97 in Indianapolis
49. Moreau C., P. Gougeon, M. Lamontagne, V. Lacasse, G. Vaudreuil and P. Cielo, "Thermal Spray Industrial Applications", p. 431-437, Proc. Nat. Thermal Spray Conference, Boston, ASM International Materials Park, OH (1994).
50. Gougeon P., C. Moreau, V. Lacasse, M. Lamontagne, I. Powell and A. Bewsher, "Advanced Processing Techniques - Particulate Materials", Proc. Conf. on Powder Metallurgy and Particulate Materials, Toronto, Metal Powder Industries Federation (1994) vol. 6, pp. 199-210.
51. R.A Miller, J.L Smialek, R.G. Garlick "Phase-stability in Plasma Sprayed, Partially Stabilized Zirconia-Yttria", Science and Technology of Zirconia, Advances in ceramics, Vol. 3, A.H Heuer and L.W. Hobbs (eds), The American Ceramic Society, Westerville, OH, 1981, pp.241-253.
52. J. Brandon, R. Taylor "Phase Stability of Zirconia-base Thermal Barrier Coatings. Part 1. Zirconia-Yttria Alloys" Surface and Coationg Technology, 46 (1991), pp. 75-90.
53. R.L Jones "Scandia,Yttria-stabilized Zirconia (SYSZ): Candidate Materials for High Temperature TBC:s" poster presented at the TBC Workshop in Cincinnati 1997
54. R Hamacha, P Fauchais, F Nardou " Influence of Dopant on the Thermal Properties of Two Plasma Sprayed Zirconia Coatings Part I: Relationship between Powder Characteristics and Coating Properties" Journal of Thermal Spray Technology Volume 5 (4) December 1996
55. R L Jones "Some aspects of the Hot Corrosion of Thermal Barrier Coatings" Journal of Thermal Spray Technology, Volume 6(1) March 1997
56. Borom, C.A. Johnson, L.A. Peluso "Role of Environmental Deposits in Spallation of Thermal Barrier Coatings on Aeroenginee and Land-based Gas Turbine Hardware", ASME 96-GT-285.
57. Haubold, J. Wigren, C. Gualco "Comparison of Thermal Cycling Experiments on Thick Thermal Barrier Coatings" to be presented at ITSC'98 in Nice.