Towards a better control of thermal spray processes

Proceedings of the International Thermal Spray Conference

Volumn 2, Issue , 1998, Pages 1681-1693

  Moreau, C ^a  

^a NATIONAL RESEARCH COUNCIL CANADA   (Canada)

Author keywords

[No Author keywords available]

Indexed keywords

BIOMEDICAL ENGINEERING; COOLING; ELECTRIC POTENTIAL; EVAPORATION; PLASMA SPRAYING; PROCESS CONTROL; SENSORS; SPRAYED COATINGS; SUBSTRATES;

INTELLIGENT PROCESSING OF MATERIALS (IPM); THERMAL SPRAYING;

THERMAL BARRIER COATINGS;

EID: 1442305824     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: None     Document Type: Conference Paper

References (123)

1. Czech, N., "Thermal Spray Coatings '97", Conf. Proc. Atlanta, USA, April 1997, Groham Advanced Materials, Inc., Gorham, Maine, USA (1997)
2. Mutasim, Z. and W. Brentnall, "Thermal Barrier Coating Workshop 1995", p 103, Cleveland, USA, March 1995, NASA LewisResearch Center, Cleveland, USA (1995)
3. Parks, W.P., E.E. Hoffman, W.Y. Lee and I.G. Wright, "Thermal Barrier Coating Workshop 1995", p 35, Cleveland, USA, March 1995, NASA Lewis Research Center, Cleveland, USA (1995)
4. Cheang, P. and K.A. Khor, J. Therm. Spray Technol., 5, 310-316 (1996)
5. Pawlowski, L., J. Therm. Spray Technol., 5, 317-334 (1996)
6. McCune, R.C., Welding Journal, August, 41-47 (1995)
7. Wuest, G., G. Barbezat and S. Keller, "Applications for Aluminum in Vehicle Design", SAE Special Publications, SP-1251, 33-43 (1997)
8. Rao, V.D.N., D.M. Kabat, H.A. Cikanek, C.A. Fucinari and G. Wuest, "Applications for Aluminum in Vehicle Design", SAE Special Publications, SP-1251, 107-132 (1997)
9. Sampath, S., H. Herman, N. Shimoda and T. Saito, MRS Bulletin, 20, 27-31 (1995)
10. Smith, R.W., "Review of Progress in Quantitative Nondestructive Evaluation, Vol 8B", p 1169, eds. D.O. Thompson and D.E. Chimenti, Plenum Press, New York (1989)
11. Fauchais, P., A. Vardelle and M. Vardelle, "High Performance Ceramic Films and Coatings", p 3, ed. P. Vincenzini, Elsevier Science Pub., B.V. (1991)
12. Léger, A.C., M. Vardelle, A. Vardelle, and P. Fauchais, "Thermal Spray: Practical Solutions for Engineering Problems", p. 623, Conf. Proc. NTSC, Cincinnati, USA, October 1996, ASM International, Materials Park, OH, USA (1996)
13. Moreau, C., P. Cielo and M. Lamontagne, J. Therm. Spray Technol., 1, 317-323 (1992)
14. Pfender, E., W.L.T. Chen, and R. Spores, "Thermal Spray Research and Applications", p 1, Proc. Conf. NTSC, Long Beach, USA, May 1990, ASM International, Materials Park, OH, USA (1991)
15. Fauchais, P., J.F. Coudert, M. Vardelle, A. Vardelle, "Thermal Plasma Applications in Materials and Metallurgical Processing", p. 31, ed. N.E. Kaddah, The Minerals, Metals & Materials Society (1992)
16. Rahmane, M., G. Soucy and M.I. Boulos, Rev. Sci. Instrum., 66, 3424-3431 (1995)
17. Fincke, J.R., Pure & Appl. Chem., 68, 1001-1006 (1996)
18. Fincke, J.R., S.C. Snyder, W.D. Swank, D. C. Haggard and L. D. Reynolds, "Transport Phenomena in Materials Processing and Manufacturing", p 129, ASME, HTD-Vol. 280 (1994)
19. Korpiola, K., J.-P. Hirvonen, H. Jalkanen, L. Laas and F. Rossi, "Advances in Thermal Spray Science & Technology", p 181, Conf. Proc. NTSC, Houston, USA, September 1995, ASM International, Materials Park, OH, USA (1995)
20. Harris, D. and M. Kelly, "Plasma Processing and Synthesis of Materials", p 141, ed. D. Apelian and J. Szekely, Mat. Res. Soc. Sympo. Proc., vol. 98 (1987)
21. Malberg, S., J. Heberlein and E. Pfender, "Thermal Spray 93", p 40, Proc. Conf. TS93, Aachen, Germany, March 1993
22. Hackett, C.M. and G.S. Settles, "Thermal Spray Industrial Applications", p 307, Proc. Conf. NTSC, Boston, USA, June 1994, ASM International, Materials Park, OH, USA (1994)
23. Hackett, C.M. and G.S. Settles, "Advances in Thermal Spray Science & Technology", p 21, Conf. Proc. NTSC, Houston, USA, September 1995, ASM International, Materials Park, OH, USA (1995)
24. Wutzke, S.A., E. Pfender and E.R.G. Eckert, AIAA (6) 8, 1474 (1968)
25. Coudert, J.F., M.P. Planche and P. Fauchais, High Temp. Chem. Processes, 3, 639-651 (1994)
26. Coudert, J.F., M.P. Planche and P. Fauchais, Plasma Chem. Plasma Process., 16 Suppl., 211S-227S, (1996)
27. Brilhac, J.-F., B. Pateyron, G. Delluc, J.-F. Coudert and P. Fauchais, Plasma Chem. Plasma Process., 15, 231-255 (1995)
28. Xi, J., G. Krishnappa, C. Moreau, Proc. United Thermal Spray Conference, Indianapolis, USA, September 1997, in press
29. Coudert, J.F., M.P. Planche and P. Fauchais, Plasma Chem. Plasma Process., 15, 47-70, (1995)
30. Wang, X., J. Heiberlein, E. Pfender and W. Gerberich, "Advances in Thermal Spray Science & Technology", p 31, Conf. Proc. NTSC, Houston, USA, September 1995, ASM International, Materials Park, OH, USA (1995)
31. Kovacevic, R., R, Mohan, M. Murugesan and A.F. Seybert, Proc. Instn. Mech. Engrs. Part B: Journal of Eng. Manufacture, 209, 269-379 (1995)
32. Murugesan M., R. Mohan, R. Kovacevic and A.F. Seybert, "Manufacturing Science and Engineering", p 367, PED-Vol. 68-1, ASME (1994)
33. Gougeon, P., C. Moreau, F. Richard, "Advances in Thermal Spray Science & Technology", p 149, Conf. Proc. NTSC, Houston, USA, September 1995, ASM International, Materials Park, OH, USA (1995)
34. Leblanc, L, P. Gougeon and C. Moreau, Proc. United Thermal Spray Conference, Indianapolis, USA, September 1997, in press
35. Prystay, M., P. Gougeon, G. Moreau, "Thermal Spray: Practical Solutions for Engineering Problems", p. 517, Conf. Proc. NTSC, Cincinnati, USA, October 1996, ASM International, Materials Park, OH, USA (1996)
36. Wigren, J., M.-O. Hansson, P. Gougeon, C. Moreau, "Thermal Spray: Practical Solutions for Engineering Problems", p. 675, Conf. Proc. NTSC, Cincinnati, USA, October 1996, ASM International, Materials Park, OH, USA (1996)
37. Champagne, B. and S. Dallaire, "Thermal Spray: Advances in Coatings Technology", p 25, Conf. Proc. NTSC, Orlando, USA, September 1987, ASM International, Materials Park, OH, USA (1988)
38. Mishin, J., M. Vardelle, J. Lesinski and P. Fauchais, J. Phys. E: Sci. Instrum., 20, 620-625 (1987)
39. Vardelle, M, A. Vardelle, P. Fauchais and M.I. Boulos, AlChE Journal, 29, 236-243 (1983)
40. Henne, R.H., V. Borck, W. Mayr, K. Landes and A. Reusch, "Advances in Thermal Spray Science & Technology", p 67, Conf. Proc. NTSC, Houston, USA, September 1995, ASM International, Materials Park, OH, USA (1995)
41. Smith, M.F., T.J. O'Hern, J.E. Brockmann, R.A. Neiser and T.J. Roemer, "Advances in Thermal Spray Science & Technology", p 105, Conf. Proc. NTSC, Houston, USA, September 1995, ASM International, Materials Park, OH, USA (1995)
42. Frind, G., C.P. Goody and L.E. Prescott, "ISPC-6", p 120, Proc. Conf. Montreal, Canada, July 1883
43. Fincke, J.R., W.D. Swank, C.K. Jeffery and C.A. Mancuso, Meas. Sci. Technol., 4, 559-565 (1993)
44. Guselnikov, S.M., A.G. Zavarzin, V.P. Lyagushin, A.A. Mikhalchenko, O.P. Solonenko, "Plasma Jets", p 163, Eds. Solonenko and Fedorchenko, VPS, USSR (1990)
45. Sakuta, T., T. Ohtsuchi, K. Sakai and T. Takashima, Proc. Jpn. Symp. Plasma Chem., 4, 175-180 (1991)
46. Coulombe, S. and M.I. Boulos, Plasma Chem. and Plasma Proc., 15, 653-675 (1995)
47. Lyagushkin, V.P., O.P. Solonenko, "ISPC-7", paper B-5-5, p 730, Eindhoven, July 1985
48. Oki, S., S. Gohda and K. Furukubo, "Thermal Spraying - Current Status and Future Trends", p 441, Conf. Proc, ITSC, Kobe, Japan, May 1995, High Temperature Society of Japan, Osaka, Japan (1995)
49. Kuroda, S., H. Fujimore, T. Fukushima and S. Kitihara, Trans. Japan Welding Soc., 22, 10-17 (1991)
50. Moreau, C., P. Gougeon, M. Lamontagne, V. Lacasse, G. Vaudreuil and P. Cielo, "Thermal Spray Industrial Applications", p 431, Proc. Conf. NTSC, Boston, USA, June 1994, ASM International, Materials Park, OH, USA (1994)
51. Gougeon, P., C. Moreau, V. Lacasse, M. Lamontagne, I. Powell and A. Bewsher, "Advanced Processing Techniques, Particulate Materials", vol. 6, p 199, Metal Powder Industries Federation, Princeton, N.J., USA (1994)
52. Swank, W.D., J.R. Fincke, and D.C. Haggard, "Advances in Thermal Spray Science & Technology", p 111, Conf. Proc. NTSC, Houston, USA, September 1995, ASM International, Materials Park, OH, USA (1995)
53. Li, K.-I, M. Vardelle and P. Fauchais, "Advances in Thermal Spray Science & Technology", p 45, Conf. Proc. NTSC, Houston, USA, September 1995, ASM International, Materials Park, OH, USA (1995)
54. Fincke, J.R., and W. Vanchuck, Materials Technology, 11, 131-144 (1996)
55. Tecnar Automation Ltee, St-Hubert, Quebec, Canada
56. Tafa, Inc., Concord, NH 03301, USA
57. Bengtsson, P. and T. Johannesson, J. Therm. Spray Technol., 4, 245-251 (1995)
58. Castro, R.G., A.H. Bartlett, K.E. Elliot and K.J. Hollis, "Thermal Spray: Practical Solutions for Engineering Problems", p. 735, Conf. Proc. NTSC, Cincinnati, USA, October 1996, ASM International, Materials Park, OH, USA (1996)
59. Haddadi, A., A. Grimaud, A. Denoirjean, F. Nardou and P. Fauchais, "Thermal Spray: Practical Solutions for Engineering Problems", p. 615, Conf. Proc. NTSC, Cincinnati, USA, October 1996, ASM International, Materials Park, OH, USA (1996)
60. Mellali, M., M. Vardelle, A. Grimaud and P. Fauchais, "Thermal Spray 93", p 152, Proc. Conf. TS93, Aachen, Germany, March 1993
61. Mellali, M., P. Fauchais and A. Grimaud, VDI-Berichte NR.1166, 387-393 (1995)
62. Mellali, M., P. Fauchais and A. Grimaud, Surf. Coat. Technol., 81, 275-286 (1996)
63. Kuroda, S. and S. Kitahara, "Thermal Spraying - Current Status and Future Trends", p 489, Conf. Proc, ITSC, Kobe, Japan, May 1995, High Temperature Society of Japan, Osaka, Japan (1995)
64. Bergtsson, P., T. Jonannesson and J. Wigren, "Thermal Spraying - Current Status and Future Trends", p 513, Conf. Proc, ITSC, Kobe, Japan, May 1995, High Temperature Society of Japan, Osaka, Japan (1995)
65. Viens, M., D. Drolet, A. Blouin, J.-P. Monchalin and C. Moreau, "Thermal Spray: Practical Solutions for Engineering Problems", p. 947, Conf. Proc. NTSC, Cincinnati, USA, October 1996, ASM International, Materials Park, OH, USA (1996)
66. Brandt, O, and M. Wandelt, "Thermal Spray: Practical Solutions for Engineering Problems", p. 799, Conf. Proc. NTSC, Cincinnati, USA, October 1996, ASM International, Materials Park, OH, USA (1996)
67. Moreau, C., P. Cielo, M. Lamontagne, S. Dallaire and M. Vardelle, Meas. Sci. Technol., 1, 807-814, (1990)
68. Moreau, C., P. Gougeon and M. Lamontagne, "Thermal Spraying - Current Status and Future Trends", p 347, Conf. Proc, ITSC, Kobe, Japan, May 1995, High Temperature Society of Japan, Osaka, Japan (1995)
69. Vardelle, M., A. Vardelle, P. Fauchais and C. Moreau, Meas. Sci, Technol., 5, 205-212 (1994)
70. Gougeon, P. and C. Moreau, Proc. United Thermal Spray Conference, Indianapolis, USA, September 1997, in press
71. Cielo, P., "Optical Techniques for Industrial Inspection", p 207, Academic Press, Inc., San Diego, USA (1988)
72. Parthasarathi, S., K. Sampath and B.R. Tittmann, "Advances in Thermal Spray Science & Technology", p 505, Conf. Proc. NTSC, Houston, USA, September 1995, ASM International, Materials Park, OH, USA (1995)
73. Sabsabi, M. and P. Cielo, Appl.Spectrosc., 49, 499 (1995)
74. Sabsabi, M. and P. Cielo, J. Anal. At. Spectrom., 10, 643 (1995)
75. Miller, R.A., "Thermal Spray Technology: New Ideas and Processes", p 363, Conf. Proc. NTSC, Cincinnati, USA, October 1988, ASM International, Materials Park, OH, USA (1989)
76. Kuroda, S., T. Fukushima and S. Kitahara, Thin Solid film 164, 157-163 (1988)
77. Cielo, P., "Optical Techniques for Industrial Inspection", p 195, Academic Press, Inc., San Diego, USA (1988)
78. Lian, D., Y. Suga, G. Shou and S. Kurihara, J. Therm. Spray Technol., 5, 128-133 (1996)
79. Rokhlin, S.I., M. Ganor and A.D. Degtyar, Rev. Prog. Quantitative NDE, 16, 1585-1591 (1997)
80. Lescribaa, D., and A. Vincent, Surf. Coat. Technol., 81, 297-306 (1996)
81. Cheeke, J.D.N., Z. Wang and M. Viens, "IEEE Ultrasonics Symposium", p 749, Proc. Conf. San Antonio, Tx, USA, November 1996, IEEE, New York, USA (1996)
82. Crutzen, H.P., F. Lakestani and J.R. Nicholls, "IEEE Ultrasonics Symposium", p 731, Proc. Conf. San Antonio, Tx, USA, November 1996, IEEE, New York, USA (1996)
83. Monchalin, J.-P., Rev. Prog. Quantitative NDE, 12, 495-506 (1993)
84. Blouin, A. and J.-P. Monchalin, Appl. Phys. Lett., 65, 932-934 (1994)
85. Suga, Y., H. Makabe and K.M. Hiyoshi, DVS, 152, 201-204 (1993)
86. Moreau, C. P. Gougeon, L. Leblanc, M. Prystay, M. Viens, A. Blouin, D. Drolet and J.-P. Monchalin, MRS Fall Meeting, Symposium BB: Science and Technology of Thermal Spray Materials Processing, Boston, USA, December 1997
87. Barbezat, G, Sulzer Metco AG, CH-5610, Wohlen, Switzerland, private communication
88. McPherson, R., Thin Solid Films, 112, 89-95 (1984)
89. McPherson, R., Surf. Coat. Technol., 39/40, 173-181 (1989)
90. Boire-Lavigne, S., C. Moreau and R.G. Saint-Jacques, J. Therm. Spray Technol., 4, 261-267 (1995)
91. Cielo, P. and S. Dallaire, J. Mater. Eng., 9, 71-79 (1987)
92. Houghton, M.E., "Surface Engineering Processes and Applications", chap. 17 p 313, Technomic Publishing Co., Lancaster, PA, USA (1995)
93. Bento, A.C. and D.P. Almond, Meas. Sci. Technol., 6, 1022-1027 (1995)
94. Crostack, H.-A., W. Jahnel, E.H. Meyer and U. Selvadurai-LaB1, Welding in the World, 37, 114-120 (1996)
95. Bishoff, W., H.-A. Crostack, W. Jahnel and M. Maab, Welding and Cutting, 4, E73-E76 (1995)
96. Bashkansky, M., P.R. Battle, M. D. Duncan, M. Kahn and J. Reintjes, J. Am. Ceram. Soc., 79, 1397-1400 (1996)
97. Bashkanskyl, M., M. D. Duncan, M. Kahn, D. Lewis III and J. Reintjes, Optics Letters, 22, 61-63 (1997)
98. Cormier, J-F., National Research Council Canada, Industrial Materials Institute, Boucherville, Quebec, Canada, J4B 6Y4 and M. Bashkansky, Laser Physics Branch, Code 5640, Naval Research Laboratory, Washington, D.C., USA, 20375, private communication
99. Northwest Mettech Corp., Richmond, B.C. Canada, V6V 1Y4
100. Moreau, C., P. Gougeon, A. Burgess and D. Ross, "Advances in Thermal Spray Science & Technology", p 141, Conf. Proc. NTSC, Houston, USA, September 1995, ASM International, Materials Park, OH, USA (1995)
101. Neiser, R.A. and M.F. Smith, MRS Fall Meeting, Symposium BB: Science and Technology of Thermal Spray Materials Processing, Boston, USA, December 1997
102. Neiser, R.A., R.C. Dykhuizen, M.F. Smith and K.J. Hollis, "Thermal Spray Coatings: Research, Design and Applications", p 61, Conf. Proc. NTSC, Anaheim, USA, June 1993, ASM International, Materials Park, OH, USA (1993)
103. Fincke, J.R., W.D. Swank, D.C. Haggard, T.M. Demeny, S.M. Pandit and A.R. Kashani, "Advances in Thermal Spray Science & Technology", p 117, Conf. Proc. NTSC, Houston, USA, September 1995, ASM International, Materials Park, OH, USA (1995)
104. Fincke, J.R., W.D. Swank, D.C. Haggard, T.M. Demeny, S.M. Pandit and A.R. Kashani, "Advances in Thermal Spray Science & Technology", p 123, Conf. Proc. NTSC, Houston, USA, September 1995, ASM International, Materials Park, OH, USA (1995)
105. Wright, R.N., J.R. Fincke, W.D. Swank and D.C. Haggard, "Thermal Spray: Practical Solutions for Engineering Problems", p. 511, Conf. Proc. NTSC, Cincinnati, USA, October 1996, ASM International, Materials Park, OH, USA (1996)
106. Wright, R.N., J.R. Fincke, W.D. Swank, D.C. Haggard and C.R. Clark, "Elevated Temperature Coatings: Science and Technology 1", p 157, eds. N.B. Dahotre, J.M. Hampikian and J.J. Stiglich, The Minerals, Metals & Materials Society (1995)
107. Frelon, A., "Advances in Thermal Spray Science & Technology", p 57, Conf. Proc. NTSC, Houston, USA, September 1995, ASM International, Materials Park, OH, USA (1995)
108. Parrish, P.A., "Intelligent Processing of Materials", p 3, Eds. H.N.G. Wadley and W.E. Eckhart, Jr., The Minerals, Metals & Materials Society, Warrendale, USA (1990)
109. Taylor, J.H., P.K. Houpt, L.P. Harris, H.-P. Wang and E.S. Russell, "Advanced Sensing, Modelling, and Control of Materials Processing", p 275, ed. E.F. Matthys and B. Kushner, The Minerals, Metals & Materials Society (1992)
110. Lau, Y.C., C.A. Johonson, D.M. Gray, P. Houpt, M. Penny and H.P. Wang, "Thermal Barrier Coating Workshop 1997", p. 151, Conf. Proc. Cincinnati, USA, May 1997, NASA Lewis Research Center, Cleveland, USA (1997)
111. "Intelligent Processing of Materials", Eds. H.N.G. Wadley and W.E. Eckhart, Jr., The Minerals, Metals & Materials Society, Warrendale, USA, 455 pages (1990)
112. Zappia, T.J., D. Harvey, C. Madden and A. Maltesen, SPIE, Vol. 2061, 504-515 (1993)
113. Einerson, C.J., D.E. Clarck, B.A. Detering and P.L. Taylor, "Thermal Spray Coatings: Research, Design and Applications", p 205, Conf. Proc. NTSC, Anaheim, USA, June 1993, ASM International, Materials Park, OH, USA (1993)
114. Oberkampf, W.L. and M. Talpallikar, J. Therm. Spray Technol., 5, 53-61 (1996)
115. Oberkampf, W.L. and M. Talpallikar, J. Therm. Spray Technol., 5, 62-68 (1996)
116. Huang, P.C., J. Heberlein and E. Pfender, Surf. Coat. Technol., 73, 142-151 (1995)
117. Fukanuma, H., "Thermal Spray: Practical Solutions for Engineering Problems", p. 647, Conf. Proc. NTSC, Cincinnati, USA, October 1996, ASM International, Materials Park, OH, USA (1996)
118. Pasandideh-Fard, M. and J. Mostaghimi, Plasma Chem Plasma Proc., 16, 83S-98S (1996)
119. Argyris, J. I. St. Doltsinis, M. Eggers and R. Handel, "Materials and Design Technology", p 303, ASME, PD-Vol. 62 (1994)
120. Bertagnolli, M., M. Marchese, G. Jacucci, I. St. Doltsinis and S. Noelting, "Materials and Design Technology", p 199, ASME, PD-Vol. 62 (1994)
121. Li, C., A. Ohmori and R. McPherson, J. Mat. Science, 32, 997-1004 (1997)
122. Das, S, V.K. Suri, U, Chandra and K. Sampath, J. Thermal Spray Technol., 4, 153-162 (1995)
123. Wigren, J., L. Pejryd, P. Gougeon and C. Moreau, International Thermal Spray Conference, Nice, France, May 1998, in these proceedings