-
1
-
-
0019962848
-
A ten-year follow-up of one hundred consecutive Müller curved-stem total hip-replacement arthroplasties
-
Sutherland, C.J., Wilde, A.H., Borvden, L.S. and Marks, K.E., A Ten-Year Follow-up of One Hundred Consecutive Müller Curved-Stem Total Hip-Replacement Arthroplasties, J. Bone Joint Surg., Vol. 64-A (7) (1982), pp. 970-982.
-
(1982)
J. Bone Joint Surg.
, vol.64 A
, Issue.7
, pp. 970-982
-
-
Sutherland, C.J.1
Wilde, A.H.2
Borvden, L.S.3
Marks, K.E.4
-
2
-
-
0021254962
-
Conventional total hip arthroplasty for degenerative joint disease in patients between the ages of forty and sixty years
-
Ranawat, C.S., Atkinson, R.E., Salvati, E.A. and Wilson, P.D., Conventional Total Hip Arthroplasty for Degenerative Joint Disease in Patients between the Ages of Forty and Sixty Years, J. Bone and Joint Surg., Vol. 66-A (5) (1984), pp. 745-752.
-
(1984)
J. Bone and Joint Surg.
, vol.66 A
, Issue.5
, pp. 745-752
-
-
Ranawat, C.S.1
Atkinson, R.E.2
Salvati, E.A.3
Wilson, P.D.4
-
3
-
-
0023484642
-
Long-Term results of cemented total hip arthroplasty
-
Eftekhar, N.S., Long-Term Results of Cemented Total Hip Arthroplasty, Clin. Orthop. Rel. Res., Vol. 225 (1987), pp. 207-217.
-
(1987)
Clin. Orthop. Rel. Res.
, vol.225
, pp. 207-217
-
-
Eftekhar, N.S.1
-
4
-
-
0026605414
-
Mechanism and clinical significance of wear debris-induced osteolysis
-
Amstutz, H.C., Campbell, P., Kossovsky, N. and Clarke, I.C., Mechanism and Clinical Significance of Wear Debris-Induced Osteolysis, Clin. Orthop. Rel. Res., Vol. 276 (1992), pp. 7-18.
-
(1992)
Clin. Orthop. Rel. Res.
, vol.276
, pp. 7-18
-
-
Amstutz, H.C.1
Campbell, P.2
Kossovsky, N.3
Clarke, I.C.4
-
5
-
-
0028798063
-
The problem is osteolysis
-
Harris, W.H., The Problem is Osteolysis, Clin. Orthop. Rel. Res., Vol. 311 (1995), pp. 46-53.
-
(1995)
Clin. Orthop. Rel. Res.
, vol.311
, pp. 46-53
-
-
Harris, W.H.1
-
6
-
-
0030152204
-
Unacceptable biodegradation of polyethylene in vivo
-
Prever, E.B., Crova, M., Costa, L., Dallera, A., Camino, G. and Gallinaro, P., Unacceptable Biodegradation of Polyethylene in Vivo, Biomaterials, Vol. 17 (1996), pp. 873-878.
-
(1996)
Biomaterials
, vol.17
, pp. 873-878
-
-
Prever, E.B.1
Crova, M.2
Costa, L.3
Dallera, A.4
Camino, G.5
Gallinaro, P.6
-
7
-
-
0025834740
-
Low wear rate of UHMWPE against Zirconia ceramic (Y-PSZ) in comparison to Alumina ceramic and SUS 316L Alloy
-
Kumar, P., Oka, M., Ikeuchi, K., Shimizu, K., Yamamuro, T., Okumura, H. and Kotoura, Y., Low Wear Rate of UHMWPE against Zirconia Ceramic (Y-PSZ) in Comparison to Alumina Ceramic and SUS 316L Alloy, J. Biomed. Mater. Res., Vol. 25 (1991), pp. 813-828.
-
(1991)
J. Biomed. Mater. Res.
, vol.25
, pp. 813-828
-
-
Kumar, P.1
Oka, M.2
Ikeuchi, K.3
Shimizu, K.4
Yamamuro, T.5
Okumura, H.6
Kotoura, Y.7
-
8
-
-
0026850841
-
Effect of roughness and sliding speed on the wear and friction of ultra-high molecular weight polyethylene
-
Barrett, T.S., Stachowiak, G.W. and Batchelor, A. W., Effect of Roughness and Sliding Speed on the Wear and Friction of Ultra-High Molecular Weight Polyethylene, Wear, Vol. 153 (1992), pp. 331-350.
-
(1992)
Wear
, vol.153
, pp. 331-350
-
-
Barrett, T.S.1
Stachowiak, G.W.2
Batchelor, A.W.3
-
9
-
-
0006544376
-
Orientation softening in the deformation and wear of ultra-high molecular weight polyethylene
-
Wang, B., Sun, D.C., Yau, S.-S., Edwards, B., Sokol, M., Essner, A., Polineni, V.K., Stark, C. and Dumbleton, J.H., Orientation Softening in the Deformation and Wear of Ultra-High Molecular Weight Polyethylene, Wear, Vol. 203-204 (1997), pp. 230-241.
-
(1997)
Wear
, vol.203-204
, pp. 230-241
-
-
Wang, B.1
Sun, D.C.2
Yau, S.-S.3
Edwards, B.4
Sokol, M.5
Essner, A.6
Polineni, V.K.7
Stark, C.8
Dumbleton, J.H.9
-
10
-
-
0026311405
-
Tribology of total artificial joints
-
Fisher, J. and Dowson, D., Tribology of Total Artificial Joints, Proc. Instn. Mech. Engrs., Vol. 205 (1991), pp. 73-79.
-
(1991)
Proc. Instn. Mech. Engrs.
, vol.205
, pp. 73-79
-
-
Fisher, J.1
Dowson, D.2
-
11
-
-
0029255360
-
Wear mechanisms of UHMWPE in total joint replacements
-
Wang, A., Sun, D.C., Stark, C. and Dumbleton, J.H., Wear Mechanisms of UHMWPE in Total Joint Replacements, Wear, Vol. 181-183 (1995), pp. 241-249.
-
(1995)
Wear
, vol.181-183
, pp. 241-249
-
-
Wang, A.1
Sun, D.C.2
Stark, C.3
Dumbleton, J.H.4
-
12
-
-
0026202775
-
Combined chemical and mechanical effects on free radicals in UHMWPE joints during implantation
-
Jahan, M.S. and Wang, C., Combined Chemical and Mechanical Effects on Free Radicals in UHMWPE Joints during Implantation, J. Biomed. Mater. Res., Vol. 25 (1991), pp. 1005-1017.
-
(1991)
J. Biomed. Mater. Res.
, vol.25
, pp. 1005-1017
-
-
Jahan, M.S.1
Wang, C.2
-
13
-
-
0032171221
-
Precoating of ultrahigh molecular weight polyethylene with polymethylmethacrylate: Interfacial strength
-
Kang, Y.H., Park, J.B., Precoating of Ultrahigh Molecular Weight Polyethylene with Polymethylmethacrylate: Interfacial Strength, J. Biomed. Mater. Res., Vol. 43 (1998), pp. 261-269.
-
(1998)
J. Biomed. Mater. Res.
, vol.43
, pp. 261-269
-
-
Kang, Y.H.1
Park, J.B.2
-
14
-
-
0029212572
-
Wear mechanism and particle generation in ultrahigh molecular weight polyethylene
-
Lankford, J., Blanchard, C.R. and Agrawal, C.M., Wear Mechanism and Particle Generation in Ultrahigh Molecular Weight Polyethylene, IEEE (1995), pp. 270-272.
-
(1995)
IEEE
, pp. 270-272
-
-
Lankford, J.1
Blanchard, C.R.2
Agrawal, C.M.3
-
15
-
-
0033178826
-
Unified wear model for highly crosslinked ultra-high molecular weight polyethylenes (UHMWPE)
-
Muratoglu, O.K., Bragdon, C.R., O'Connor, D.O., Jasty, W.H., Gul, M.R. and McGarry, F., Unified Wear Model for Highly Crosslinked Ultra-High Molecular Weight Polyethylenes (UHMWPE), Biomaterials, Vol. 20 (1999), pp. 1463-1470.
-
(1999)
Biomaterials
, vol.20
, pp. 1463-1470
-
-
Muratoglu, O.K.1
Bragdon, C.R.2
O'Connor, D.O.3
Jasty, W.H.4
Gul, M.R.5
McGarry, F.6
-
16
-
-
0000792084
-
Effect of radiation dosage on the wear of stabilized UHMWPE evaluated by hip and knee joint simulators
-
Wang, A., Polineni, V.K., Essner, A., Sun, D.C., Stark, C. and Dumbleton, J.H., Effect of Radiation Dosage on the Wear of Stabilized UHMWPE Evaluated by Hip and Knee Joint Simulators, Transactions of the 23rd Society Congress on Biomaterials, (1997), p. 394.
-
(1997)
Transactions of the 23rd Society Congress on Biomaterials
, pp. 394
-
-
Wang, A.1
Polineni, V.K.2
Essner, A.3
Sun, D.C.4
Stark, C.5
Dumbleton, J.H.6
-
17
-
-
0031104435
-
The effects of irradiation and ageing on the abrasive wear resistance of ultra high molecular weight polyethylene
-
Choudhury, M. and Hutchings, I.M., The Effects of Irradiation and Ageing on the Abrasive Wear Resistance of Ultra High Molecular Weight Polyethylene, Wear, Vol. 203-204 (1997), pp. 335-340.
-
(1997)
Wear
, vol.203-204
, pp. 335-340
-
-
Choudhury, M.1
Hutchings, I.M.2
-
18
-
-
0042682038
-
Physical modification of UHMWPE for artificial joints
-
Hyon, S.-H., Ohta, M., Oka, M. and Tsutsumi, S., Physical Modification of UHMWPE for Artificial Joints, Proc. the Int. Conf. New Frontiers in Biomech. Engr., (1997), pp. 335-336.
-
(1997)
Proc. the Int. Conf. New Frontiers in Biomech. Engr.
, pp. 335-336
-
-
Hyon, S.-H.1
Ohta, M.2
Oka, M.3
Tsutsumi, S.4
-
19
-
-
0042180894
-
Wear-resistant properties of improved UHMWPE
-
in Japanese
-
Ushijima, M., Sakaguchi, K., Oka, K., Hyon, S.-H., Ikeuchi, K. and Nakamura, T., Wear-Resistant Properties of Improved UHMWPE, (in Japanese), J. Jpn. Soc. Clin. Biomech. Rel. Res., Vol. 17 (1996), pp. 51-55.
-
(1996)
J. Jpn. Soc. Clin. Biomech. Rel. Res.
, vol.17
, pp. 51-55
-
-
Ushijima, M.1
Sakaguchi, K.2
Oka, K.3
Hyon, S.-H.4
Ikeuchi, K.5
Nakamura, T.6
-
20
-
-
0006615893
-
Methods to reduce the wear of ultrahigh-molecular-weight polyethylene
-
edited by Imura, S., Wada, M. and Omori, H., Springer-Verlag, Tokyo
-
Oka, M., Hyon, S.- H., Ohta, M., Nakamura, T., Ushio, Y. and Toguchida, J., Methods to Reduce the Wear of Ultrahigh-Molecular-Weight Polyethylene, Joint Arthroplasty, edited by Imura, S., Wada, M. and Omori, H., (1999), pp. 109-118, Springer-Verlag, Tokyo.
-
(1999)
Joint Arthroplasty
, pp. 109-118
-
-
Oka, M.1
Hyon, S.-H.2
Ohta, M.3
Nakamura, T.4
Ushio, Y.5
Toguchida, J.6
-
21
-
-
18144446381
-
Wear resistance of lightly cross-linked ultra-high-molecular-weight polyethylene crystallized from the melt under uniaxial compression
-
Ohta, M., Hyon, S.- H., Oka, M. and Tsutsumi, S., Wear Resistance of Lightly Cross-Linked Ultra-High-Molecular-Weight Polyethylene Crystallized from the Melt under Uniaxial Compression, Wear, Vol. 225-227/1-2 (1999), pp. 312-318.
-
(1999)
Wear
, vol.225-227
, Issue.1-2
, pp. 312-318
-
-
Ohta, M.1
Hyon, S.-H.2
Oka, M.3
Tsutsumi, S.4
-
22
-
-
0030082833
-
Real-time X-Ray diffraction study on two-stage drawing of ultra-high molecular weight polyethylene reactor powder above the static melting temperature
-
Uehara, H., Kanamoto, T., Kawaguchi, A. and Murakami, S., Real-Time X-Ray Diffraction Study on Two-Stage Drawing of Ultra-High Molecular Weight Polyethylene Reactor Powder above the Static Melting Temperature, Macromolecules, Vol. 29, No. 5 (1996), pp. 1540-1547.
-
(1996)
Macromolecules
, vol.29
, Issue.5
, pp. 1540-1547
-
-
Uehara, H.1
Kanamoto, T.2
Kawaguchi, A.3
Murakami, S.4
-
23
-
-
0031126552
-
Structure formation in the drawing process of poly (ethylene-2, 6-naphthalate)
-
Murakami, S. and Kawaguchi, A., Structure Formation in the Drawing Process of Poly (ethylene-2, 6-naphthalate), Kobunishi Ronbunshu, Vol. 54, No. 4 (1997), pp. 183-198.
-
(1997)
Kobunishi Ronbunshu
, vol.54
, Issue.4
, pp. 183-198
-
-
Murakami, S.1
Kawaguchi, A.2
-
24
-
-
0000515765
-
A study on the structural changes during uniaxial drawing and/or heating of poly (ethylene naphthalene-2, 6-dicarboxylate) films
-
Murakami, S., Nishikawa, Y., Tsuji, M., Kawaguchi, A., Kohjiya, S. and Cakmak, M., A Study on the Structural Changes during Uniaxial Drawing and/or Heating of Poly (ethylene naphthalene-2, 6-dicarboxylate) films, Polymer, Vol. 36, No. 2 (1995), pp. 291-297.
-
(1995)
Polymer
, vol.36
, Issue.2
, pp. 291-297
-
-
Murakami, S.1
Nishikawa, Y.2
Tsuji, M.3
Kawaguchi, A.4
Kohjiya, S.5
Cakmak, M.6
-
25
-
-
0017982127
-
Dynamic mechanical behaviour and longitudinal crystal thickness measurements on ultra-high modulus linear polyethylene: A quantitative model for the elastic modulus
-
Gibson, A.G., Davies, G.R. and Ward, I.M., Dynamic Mechanical Behaviour and Longitudinal Crystal Thickness Measurements on Ultra-High Modulus Linear Polyethylene: A Quantitative Model for the Elastic Modulus, Polymer, Vol. 19 (1978), pp. 683-693.
-
(1978)
Polymer
, vol.19
, pp. 683-693
-
-
Gibson, A.G.1
Davies, G.R.2
Ward, I.M.3
-
26
-
-
0020100344
-
Shear and tensile relaxation behaviour in oriented linear polyethylene
-
Gibson, A.G., Jawad, S.A. and Ward, I.M., Shear and Tensile Relaxation Behaviour in Oriented Linear Polyethylene, Polymer, Vol. 23 (1982), pp. 349-358.
-
(1982)
Polymer
, vol.23
, pp. 349-358
-
-
Gibson, A.G.1
Jawad, S.A.2
Ward, I.M.3
-
27
-
-
0028517059
-
The influence of short branches on the α, β and γ-Relaxation processes of ultra-high strength polyethylene fibers
-
Ohta, Y. and Yasuda, H., The Influence of Short Branches on the α, β and γ-Relaxation Processes of Ultra-High Strength Polyethylene Fibers, J. Polym. Sci.: Part B Polymer Physics, Vol. 32 (1994), pp. 2241-2249.
-
(1994)
J. Polym. Sci.: Part B Polymer Physics
, vol.32
, pp. 2241-2249
-
-
Ohta, Y.1
Yasuda, H.2
-
28
-
-
0032171609
-
Dynamic thermomechanical properties and crystallinity of ultrahigh molecular weight polyethylene tibial inserts
-
Lewis, G., Rogers, C. and Trieu, H.H., Dynamic Thermomechanical Properties and Crystallinity of Ultrahigh Molecular Weight Polyethylene Tibial Inserts, J. Biomed. Mater. Res., Vol. 43 (1998), pp. 249-260.
-
(1998)
J. Biomed. Mater. Res.
, vol.43
, pp. 249-260
-
-
Lewis, G.1
Rogers, C.2
Trieu, H.H.3
|