Two-phase flow in microchannels

Advances in Heat Transfer

Volumn 34, Issue C, 2001, Pages 145-254

  Ghiaasiaan, S M ^a   Abdel Khalik, S I ^a  

^a GEORGIA INSTITUTE OF TECHNOLOGY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 0000079921     PISSN: 00652717     EISSN: None     Source Type: Book Series    
DOI: 10.1016/S0065-2717(01)80012-5     Document Type: Article

References (233)

1. Tien C.L., Qin T.Q., and Norris P.M. Microscale thermal phenomena in contemporary technology. Thermal Science and Technology 2 (1994) 1-11
2. Vafai K., and Sözen M. A comparative analysis of multiphase transport in porous media. Ann. Rev. Heat Transfer 3 (1990) 145-162
3. Dhir V.K. Boiling and two-phase flow in porous media. Ann. Rev. Heat Transfer 5 (1994) 303-350
4. Wang C.Y., and Cheng P. Multiphase flow and heat transfer in porous media. Advances in Heat Transfer 30 (1997) 93-196
5. Part 1. Fairbrother F., and Stubbs A.E. Studies in electro-endosmosis. J. Chem. Soc. (1935) 527-529
6. Marchessault R.N., and Mason S.G. Flow of entrapped bubbles through a capillary. Ind. Eng. Chem. 52 (1960) 79-84
7. Taylor G.I. Deposition of a viscous fluid on the wall of a tube. J. Fluid Mech. 10 (1961) 161-165
8. Part 2. Bretherton F.B. The motion of long bubbles in tubes. J. Fluid Mech. 10 (1961) 166-188
9. Suo M., and Griffith P. Two-phase flow in capillary tubes. J. Basic Eng. 86 (1964) 576-582
10. Brauner N., and Moalem-Maron D. Identification of the range of "small diameter" conduits, regarding two-phase flow pattern transitions. Int. Comm., Heat Mass Transfer 19 (1992) 29-39
11. Damianides C.A., and Westwater J.W. Two-phase flow patterns in a compact heat exchanger and in small tubes. Proc. UK National Heat Transfer Cont. 2nd. 1988 (1988) 1257-1268
12. Triplett K.A., Ghiaasiaan S.M., Abdel-Khalik S.I., and Sadowski D.L. Gas-liquid two-phase flow in microchannels. Part I: Two-phase flow patterns. Int. J. Multiphase Flow 25 (1999) 377-394
13. Govier F.W., and Aziz K. The Flow of Complex Mixtures in Pipes (1972), Robert E. Krieger, Malabar, FL
14. Collier J.G., and Thome J.R. Convective Boiling and Condensation (1994), Clarendon Press, Oxford, England
15. Taitel Y., and Dukler A.E. A model for predicting flow regime transitions in horizontal and near horizontal gas-liquid flow. AIChE J. 22 (1976) 47-55
16. Taitel Y., Lee N., and Dukler A.E. Transient gas-liquid flow in horizontal pipes: modeling the flow pattern transitions. AIChE J. 24 (1978) 920-924
17. Taitel Y., Bornea D., and Dukler A.E. Modeling flow pattern transitions for steady upward gas-liquid flow in vertical tubes. AIChE J. 26 (1980) 345-354
18. Dukler A.E., and Taitel Y. Flow pattern transitions in gas-liquid systems: measurement and modeling. In: Hewitt G.F., Delhaye J.M., and Zuber N. (Eds). Multiphase Science and Technology Vol. 2 (1986), Hemisphere, Washington, D.C. 1-94
19. Barnea D. A unified model for predicting flow-pattern transitions for the whole range of pipe inclinations. Int. J. Multiphase Flow 13 (1987) 1-12
20. Taitel Y. Flow pattern transition in two-phase flow. Proc. Int. Heat Transfer Cont., 9th. 1990 (1990), Hemisphere, New York 237-254
21. Spedding P.L., and Spence D.R. Flow regimes in two-phase gas-liquid flow. Int. J. Multiphase Flow 19 (1993) 245-280
22. Oya T. Upward liquid flow in small tube into which air streams. (First report, experimental apparatus and flow patterns). Bull. JSME 14 (1971) 1320-1329
23. Barnea D., Lulinkski Y., and Taitel Y. Flow in small diameter pipes. Can. J. Chem. Eng. 61 (1983) 617-620
24. Barajas A.M., and Panton R.L. The effect of contact angle on two-phase flow in capillary tubes. Int. J. Multiphase Flow 19 (1993) 337-346
25. Fukano T., and Kariyasaki A. Characteristics of gas-liquid two-phase flow in a capillary. Nucl. Eng. Design 141 (1993) 59-68
26. Mishima K., and Hibiki T. Some characteristics of air-water two-phase flow in small diameter vertical tubes. Int. J. Multiphase Flow 22 (1996) 703-712
27. Lowry B., and Kawaji M. Adiabatic vertical two-phase flow in narrow flow channels. AIChE Symp. Ser. 48 (1988) 133-139
28. Wambsganss M.W., Jendrzejczyk J.A., and France D.M. Two-phase flow patterns and transitions in a small, horizontal, rectangular channel. Int. J. Multiphase Flow 7 (1991) 327-342
29. Ali M.I., and Kawaji M. The effect of flow channel orientation on two-phase flow in a narrow passage between flat plates. Proc. ASME/JSME Thermal Eng. Conf., 1991 Vol. 2 (1991) 183-190
30. Ali M.I., Sadatomi M., and Kawaji M. Adiabatic two-phase flow in narrow channels between two flat plates. Can. J. Chem. Eng. 71 (1993) 657-666
31. Mishima K., Hibiki T., and Nishihara H. Some characteristics of gas-liquid flow in narrow rectangular ducts. Int. J. Multiphase Flow 19 (1993) 115-124
32. Wilmarth T., and Ishii M. Two-phase flow regimes in narrow rectangular vertical and horizontal channels. Int. J. Multiphase Flow 37 (1994) 1749-1758
33. Fourar M., and Bories S. Experimental study of air-water two-phase flow through a fracture (narrow channel). Int. J. Multiphase Flow 21 (1995) 621-637
34. Narrow T.L., Ghiaasiaan S.M., Abdel-Khalik S.I., and Sadowski D.L. Gas-liquid two-phase flow patterns and pressure drop in a horizontal micro-rod bundle, Parts I and II. Int. J. Multiphase Flow 25 (1999) 377-410
35. Ekberg N.P., Ghiaasiaan S.M., Abdel-Khalik S.I., Yoda M., and Jeter S.M. Gas-liquid two-phase flow in narrow horizontal annuli. Nucl. Eng. Design 192 (1999) 59-80
36. Thulasidas M.A., Abraham M.A., and Cerro R.I. Bubble-train flow in capillaries of circular and square cross-section. Chem. Eng. Sci. 50 (1995) 183-199
37. Thulasidas T.C., Abraham M.A., and Cerro R.I. Dispersion during bubble train flow in capillaries. Chem. Eng. Sci. 54 (1999) 61-76
38. Zhao L., and Rezkallah K.S. Gas-liquid flow patterns at microgravity conditions. Int. J. Multiphase Flow 19 (1993) 751-763
39. Oya T. Upward liquid flow in small tube into which air streams (second report., presure drop at the confluence). Bull. JSME 14 (1971) 1330-1339
40. Smedley G. Preliminary drop-tower experiments on liquid-interface geometry in partially filled containers at zero gravity. Exp. Fluids 8 (1990) 312-318
41. Mandhane J.M., Gregory G.A., and Aziz K. A flow pattern map for gas-liquid flow in horizontal pipes. Int. J. Multiphase Flow 1 (1974) 537-553
42. Mishima K., and Ishii M. Flow regime transition criteria for two-phase flow in vertical tubes. Int. J. Heat Mass Transfer 27 (1984) 723-737
43. Rezkallah K.S. Weber number based flow-pattern maps for liquid-gas flows at microgravity. Int. J. Multiphase Flow 22 (1996) 1265-1270
44. Jayawardena S.S., Balakotaiah V., and Witte L.C. Flow pattern transition maps for microgravity two-phase flows. AIChE J. 43 (1997) 6137
45. Bousman W.S., McQuillen J.B., and Witte L.C. Gas-liquid flow patterns in microgravity: Effects of tube diameter, liquid viscosity, and surface tension. Int. J. Multiphase Flow 22 (1996) 1035-1053
46. Zuber N., and Findlay J. Average volumetric concentration in two-phase flow systems. J. Heat Transfer 87 (1965) 453-468
47. Wallis G.B. One-Dimensional Two-Phase Flow (1969), McGraw-Hill, New York
48. Ishii M. One-dimensional drift-flux model and constitutive equations for relative motion between phases in various flow regimes. Argonne National Laboratory Report ANL-77-47, Argonne, IL (1977)
49. Krishna V.S., and Kowalski J.E. Stratified-slug flow transition in a horizontal pipe containing a rod bundle. AIChE Symp. Ser., No. 236 80 (1984) 282-289
50. Aly M.M. Flow regime boundaries for an interior subchannel of a horizontal 37 element bundle. Can. J. Chem. Eng. 59 (1981) 158-163
51. Osamusali S.E., Groeneveld D.C., and Cheng S.C. Two-phase flow regimes and onset of flow instability in horizontal 37-rod bundles. Heat Technol 10 (1992) 46-74
52. Kariyasaki A., Fukano T., Ousaka A., and Kagawa M. Isothermal air-water two-phase up- and downward flows in vertical capillary tube (1st report, flow pattern and void fraction). Trans. JSME (Ser. B.) 58 (1992) 2684-2690
53. Bao Z.-Y., Bosnich M.G., and Haynes B.S. Estimation of void fraction and pressure drop for two-phase flow in fine passages. Trans. Inst. Chem. Eng. 72A (1994) 625
54. Triplett K.A., Ghiaasiaan S.M., Abdel-Khalik S.I., LeMouel A., and McCord B.N. Gas-liquid two-phase flow in microchannels. Part II: Void fraction and pressure drop. Int. J. Multiphase Flow 25 (1999) 395-410
55. Chexal B., Merilo M., Maulbetsch M., Horowitz J., Harrison J., Westacott J., Peterson C., Kastner W., and Schmidt H. Void Fraction Technology for Design and Analysis (1997), Electric Power Research Institute, Palo Alto, CA
56. Premoli A., Francesco D., and Prina A. A dimensionless correlation for determining the density of two-phase mixtures. Lo Termotecnica 25 (1971) 17-26
57. Hewitt G.F. Gas-liquid flow. Heat Exchanger Design Handbook Vol. 2 (1983), Hemisphere, Washington, D.C. 229-238
58. Buterworth D. A comparison of some void-fraction relationships for co-current gas-liquid flow. Int. J. Multiphase Flow 1 (1975) 845-850
59. Lockhart R.W., and Martinelli R.C. Proposed correlations of data for isothermal two-phae, two-component flow in a pipe. Chem. Eng. Prog. 45 (1949) 39-49
60. Jones Jr. O.C., and Zuber N. Slug-annular transition with particular reference to narrow rectangular ducts. In: Durst F., Tsiklauri G.V., and Afgan N. (Eds). Two-Phase Momentum, Heat and Mass Transfer in Chemical Process and Energy Engineering Systems Vol. 1 (1979), Hemisphere, Washington, D.C. 345-355
61. Wilmarth T., and Ishii M. Interfacial area concentration and void fraction of two-phase flow in narrow rectangular vertical channels. J. Fluids Eng. 119 (1997) 916-922
62. Kelessidis V.C., and Dukler A.E. Modeling flow pattern transitions for upward gas-liquid flow in vertical concentric and eccentric annuli. Int. J. Multiphase Flow 15 (1989) 173-191
63. Osamusali S.I., and Chang J.S. Two-phase flow regime transition in a horizontal pipe and annulus flow under gas-liquid two-phase flow. ASME FED Vol. 72 (1988), ASME, New York 63-69
64. Yu D., Warrington R., Barron R., and Ameal T. An experimental and theoretical investigation of fluid flow and heat transfer in microtubes. Proc. ASME/JSME Thermal Eng. Conf. 1995 Vol. 1 (1995) 523-530
65. Choi S.B., Barron R.F., and Warrington R.O. Fluid flow and heat transfer in microtubes. Proc. ASME 1991 Winter Annual Meeting, DSC Vol. 32 (1990), ASME, New York 123-134
66. Adams T.M., Abdel-Khalik S.I., Jeter S.M., and Qureshi Z.H. An experimental investigation of single-phase forced convection in microchannels. Int. J. Heat Mass Transfer 41 (1997) 851-857
67. Adams T.M., Ghiaasiaan S.M., and Abdel-Khalik S.I. Effect of dissolved noncondensables on hydrodyamics of microchannels subject to liquid forced convection. J. Enhanced Heat Transfer 6 (1999) 395-403
68. Adams T.M., Ghiaasiaan S.M., and Abdel-Khalik S.I. Enhancement of liquid forced convection heat transfer in microchannels due to the release of dissolved noncondensables. Int. J. Heat Mass Transfer 42 (1999) 3563-3573
69. Michiyoshi I. Two-phase two-component heat transfer. Proc. Int. Heat Transfer Conf., 6th, 1978 Vol. 6 (1978) 219-233
70. Mikol E.P. Adiabatic single and two-phase flow in small bore tubes. ASHRAE J. 5 (1963) 75-86
71. Olson C.O., and Sunden B. Pressure drop characteristics of small-size tubes. ASME Paper No. 94-WA/HT-1 (1994)
72. Acosta R.E., Buller R.H., and Tobias C.W. Transport processes in narrow (capillary) channels. AIChE J. 81 (1985) 473-482
73. Tong W., Bergles A.E., and Jensen M.K. Pressure drop with highly subcooled flow boiling in small-diameter tubes. Exp. Thermal Fouid Sci. 15 (1997) 202-212
74. Stanley R.S., Barron F.F., and Ameel T.A. Two-phase flow in microchannels. ASME Microelectromechanical Systems, DSC-Vol. 62/HTD Vol. 354 (1997), ASME, New York 143-152
75. McAdams W.H. Heat Transmission. 3rd ed. (1954), McGraw-Hill, New York
76. Soliman M., Schuster J.R., and Berenson P.J. A general heat transfer correlation for annual flow condensation. J. Heat Transfer 90 (1968) 267-276
77. Troniewski L., and Ulbrich R. Two-phase gas-liquid flow in rectangular channels. Chem. Eng. Sci. 39 (1984) 751-765
78. Chisholm D., and Laird A.D.K. Two-phase flow in rough tubes. Trans. ASME 80 (1958) 276-283
79. Chisholm D. A theoretical basis for the Lockhart-Martinelli correlation for two-phase flow. Int. J. Heat Mass Transfer 10 (1967) 1767-1778
80. Chisholm D.A. Pressure gradients due to friction during the flow of evaporating two-phase mixture in smooth tubes and channels. Int. J. Heat Mass Transfer 16 (1973) 347-358
81. Friedel L. Improved pressure drop correlations for horizontal and vertical two-phase pipe flow. 3R International 18 (1979) 485-492
82. Beattie D.R.H., and Whalley P.B. A simple two-phase frictional pressure drop calculation method. Int. J. Multiphase Flow 8 (1982) 83-87
83. Colebrook C.R. Turbulent flow in pipes with particular reference to the transition region between the smooth and rough pipe laws. J. Inst. Civil Eng. 11 (1939) 133-156
84. Taitel Y., and Dukler A.E. A theoretical approach to the Lockhart-Martinelli correlation for stratified flow. Int. J. Multiphase Flow 2 (1976) 591-595
85. Asali J.C., Hanratty T.J., and Andreussi P. Interfacial drag and film height for vertical annular flow. AIChE, J. 31 (1985) 895-902
86. Yao G., and Ghiaasiaan S.M. Wall friction in annular-dispersed two-phase flow. Nucl. Eng. Design 163 (1996) 149-161
87. Mikol E.P. Adiabatic single and two-phase flow in small bore tubes. ASHRAE J. 5 (1963) 75-86
88. Marcy G.P. Pressure drop with change of phase in a capillary tube. Refrig. Eng. 57 (1949) 53
89. Bolstad M.M., and Jordan R.C. Theory and use of the capillary tube expansion device. Refrig. Eng. 56 (1948) 519
90. Hopkins N.E. Rating the restrictor tube. Refrig. Eng. 58 (1950) 1087
91. Koizumi H., and Yokohama K. Characteristics of refrigerant flow in a capillary tube. ASHRAE Trans., Part 2 86 (1980) 19-27
92. Lin S., Kwok C.C.K., Li R.-Y., Chen Z.-H., and Chen Z.-Y. Local frictional pressure drop during vaporization of R-12 through capillary tubes. Int. J. Multiphase Flow 17 (1991) 95-102
93. Churchill S.W. Frictional equation spans all fluid flow regimes. Chem. Eng. 84 (1977) 91-92
94. Ungar K.E., and Cornwell J.D. Two-phase presure drop of ammonia in small diameter horizontal tubes. Paper presented at AIAA 17th Aerospace Ground Testing Conf. Nashville, TN, July 6-8, 1992 (1992)
95. Bowers M.B., and Mudawar I. High flux boiling in low flow rate, low pressure drop mini-channel and micro-channel heat sinks. Int. J. Heat Mass Transfer 37 (1994) 321-332
96. Yan Y.-Y., and Lin T.-F. Evaporation heat transfer and pressure drop to refrigerant R-134a in a small pipe. Int. J. Heat Mass Transfer 41 (1999) 4183-4194
97. Yan Y.-Y., and Lin T.-F. Condensation heat transfer and pressure drop of refrigerant R-134a in a small pipe. Int. J. Heat Mass Transfer 42 (1999) 697-708
98. Yang C.-Y., and Webb R.L. Friction pressure drop of R-12 in small hydraulic diameter extruded aluminum tubes with and without micro-fins. Int. J. Heat Mass Transfer 39 (1996) 801-809
99. Zivi S.M. Estimation of steady state steam void-fraction by means of principle of minimum entropy production. ASME Trans., Series C. 86 (1964) 237-252
100. Akers W.W., Deans H.A., and Crosser O.K. Condensation heat transfer within horizontal tube. Chem. Eng. Prog. Symp. Ser. 55 (1959) 171-176
101. Cornish R.J. Flow in a pipe of rectangular cross-section. Proc. Roy. Soc. A 120 (1928) 691-700
102. Jones Jr. O.C. An improvement in the calculation of turbulent friction in rectangular ducts. J Fluid Eng. 98 (1976) 173-181
103. Conish R.J. Flow in a pipe of rectangular cross-sections. Proc. Roy. Soc. A 120 (1928) 691-700
104. Sadatomi Y., Sato Y., and Saruwatari S. Two-phase flow in vertical noncircular channels. Int. J. Multiphase Flow 8 (1982) 641-655
105. John H., Reimann J., Westphal F., and Friedel L. Critical two-phase flow through rough slits. Int. J. Multiphase Flow 14 (1988) 155-174
106. Hsu Y.Y., and Graham R.W. Transport Processes in Boiling and Two-Phase Systems (1986), American Nuclear Society, LaGrange Park, IL
107. Carey V.P. Liquid-Vapor Phase-Change Phenomena (1992), Hemisphere, Washington, D.C.
108. 2 vols. Stralen S.V., and Cole R. Boiling Phenomena (1997), Hemisphere, Washington, D.C.
109. Tuckermann D.B., and Peasa R.F. High performance heat sinking for VLSI. IEEE Electr. Dev. Lett. EDL-2 (1981) 126-129
110. Peng X.F., and Wang B.X. Liquid flow and heat transfer in microchannels with/without phase change. Heat Transfer 1994, Proc. Int. Heat Transfer Conf., 10th Vol. 5 (1994) 159-177
111. Duncan A.B., and Peterson G.P. Review of microscale heat transfer. Appl. Mech. Rev. 47 (1994) 397-428
112. Lazarek G.M., and Black H.S. Evaporative heat transfer, pressure drop and critical heat flux in a small vertical tube with R-113. Int. J. Heat Mass Transfer 25 (1982) 945-960
113. Tran T.N., Wambsganss M.W., France D.M., and Jendrzejczyk J.A. Boiling heat transfer in a small, horizontal, rectangular channels. AIChE Symp. Ser. 89 (1993) 253-261
114. Wambsganss M.W., France D.M., Jendrzejczyk J.A., and Tran T.N. Boiling heat transfer in a horizontal small-diameter tube. J. Heat Transfer 115 (1993) 963-972
115. Tran T.N., Wambsganss M.W., and France D.M. Small circular- and rectangular-channel boiling with two refrigerants. Int. J. Multiphase Flow 22 (1996) 485-498
116. Lahey Jr. T.R., and Moody F.J. The Thermal-Hydraulics of Boiling Water Nuclear Reactors. 2nd ed. (1993), American Nuclear Society, LaGrange Park, IL.
117. Also, General Electric Report NEDO-10491. Dix G.E. Vapor void fractions for forced convection with subcooled boiling at low flow rates. Ph.D. Thesis (1971), Univ. California, Berkeley
118. Bibeau E.L., and Salcudean M. The effect of flow direction on void growth at very low velocities and low pressure. Int. Comm. Heat Mass Transfer 17 (1990) 19-25
119. Bibeau E.L., and Salcudean M. A study of bubble ebullition in forced convective subcooled nucleate boiling at low pressure. Int. J. Heat Mass Transfer 37 (1994) 2245-2259
120. Bibeau E.L., and Salcudean M. Subcooled void growth mechanisms and prediction at low pressure and low velocity. Int. J. Multiphase Flow 20 (1994) 837-863
121. Saha P., and Zuber N. Point of net vapor generation and vapor void fraction in subcooled boiling. Proc. Int. Heat Transfer Conf., 5th Vol. 4 (1974) 175-179
122. Unal H.C. Determination of the initial point of net vapor generation in flow boiling systems. Int. J. Heat Mass Transfer 18 (1975) 1095-1099
123. Levy S. Forced convection subcooled boiling: prediction of vapor volumetric fraction. Int. J. Heat Mass Transfer 10 (1967) 951-965
124. Staub F.W. The void fraction in subcooled boiling: prediction of the initial point of net vapor generation. J. Heat Transfer 90 (1968) 151-157
125. Rogers T.J., Salcudean M., Abdullah Z., McLeond D., and Poirier D. The onset of significant void in up-flow boiling of water at low pressure and velocities. Int. J. Heat Mass Transfer 30 (1987) 2247-2260
126. Bouré J.A., Bergles A.E., and Tong L.S. Review of two-phase flow instability. Nucl. Eng. Design 25 (1973) 165-192
127. Yadigaroglu G. Two-phase flow instabilities and propagation phenomena. In: Delhaye M., Giot M., and Riethermuller LM. (Eds). Thermohydraulics of Two-Phase Systems for Industrial Design and Nuclear Engineering (1981), Hemisphere, Washington, D.C. 353-403
128. Marsh W.J., and Mudawar I. Predicting the onset of nucleate boiling in wavy free-falling turbulent liquid films. Int. J. Heat Mass Transfer 32 (1989) 361-378
129. Bergles A.E., and Rohsenow W.M. The determination of forced convection surface boiling heat transfer. Int. J. Heat Mass Transfer 86 (1964) 365-372
130. Inasaka F., Nariai H., and Shimura T. Pressure drops in subcooled boiling in narrow tubes. Heat Transfer: Japanese Research 18 (1989) 70-82
131. Vandervort C.L., Bergles A.E., and Jensen M.K. Heat transfer mechanisms in very high heat flux subcooled boiling. ASME, Fundamentals of Subcooled Flow Boiling, HTD Vol. 217 (1992) 1-9
132. Kennedy J.E., Roach Jr. G.M., Dowling M.F., Abdel-Khalik S.I., Ghiaasiaan S.M., Jeter S.M., and Qureshi Z.H. The onset of flow instability in uniformly heated horizontal microchannels. J. Heat Transfer 122 (2000) 118-125
133. Yin S.T., and Abdelmessih A.H. Prediction of incipient flow boiling from a uniformly heated surface. AIChE Symp. Ser. 164 (1974) 236-243
134. Hino R., and Ueda T. Studies on heat transfer and flow characteristics in subcooled flow boiling-Part I. Boiling characteristics. Int. J. Heat Mass Transfer 11 (1985) 269-281
135. Roch Jr. G.M., Abdel-Khalik S.I., Ghiaasiaan S.M., and Jeter S.M. Low-flow onset of flow instability in heated microchannels. Nucl. Sci Eng. 133 (1999) 106-117
136. Rogers J.T., and Li J.-H. Prediction of the onset of significant void in flow boiling of water. ASME, Fundamentals of Subcooled Flow Boiling HDT-Vol. 217 (1992) 41-52
137. Al-Hayes R.A.M., and Winterton R.H.S. Bubble diameter on detachment in flowing liquids. Int. J. Heat Mass Transfer 24 (1981) 223-230
138. Martinelli R.C. Heat transfer to molten metals. Trans. ASME 69 (1947) 947-951
139. Blasick A.M., Dowling M.F., Abdel-Khalik S.I., Ghiaasiaan S.M., and Jeter S.M. Onset of flow instability in uniformly-heated thin horizontal annuli. Proc. 8th Int. Conf. Nucl. Eng. (ICONE-8). April 2-6, Baltimore, MD (2000)
140. Zijl W., Ramakers F.J.M., and Van Stralen S.J.D. Global numerical solutions of growth and departure of a vapor bubble at a horizontal superheated wall in a pure liquid and a binary mixture. Int. J. Heat Mass Transfer 22 (1979) 401-420
141. Lee R.C., and Nydahl J.E. Numerical calculation of bubble growth in nucleate boiling from inception through departure. J. Heat Transfer 111 (1989) 474-479
142. Kocamustafaogullari G., and Ishii M. Interfacial area and nucleation site density in boiling systems. Int. J. Heat Mass Transfer 26 (1983) 1377-1387
143. Yang S.R., and Kim P.H. A mathematical model of the pool boiling nucleation site density in terms of the surface characteristics. Int. J. Heat Mass Transfer 31 (1988) 1127-1135
144. 2. Int. J. Heat Mass Transfer 19 (1976) 643-649
145. Shin T.S., and Jones O.C. Nucleation and flashing in nozzles-1: A distributed nucleation model. Int. J. Multiphase Flow 19 (1993) 943-964
146. Klausner J.F., Meis R., and Zeng L.Z. Predicting stochastic features of vapor bubble detachment in flow boiling. Int. J. Heat Mass Transfer 40 (1997) 3547-3552
147. Lin L., Udell K.S., and Pisano A.P. Vapor bubble formation on a micro heater in confined and unconfined micro channels. ASME, Heat Transfer on the Microscale, HTD Vol. 253 (1993) 85-93
148. Lahey Jr. R.T., and Drew D.A. The three-dimensional time and volume averaged conservation equations of two-phase flow. In: Lewis J., and Becker M. (Eds). Advances in Nuclear Science and Technology Vol. 20 (1988), Plenum Press, New York 1-69
149. Drew D.A., and Lahey Jr. R.T. The virtual mass and lift force on a sphere in rotating and straining inviscid flow. Int. J. Multiphase Flow 13 (1987) 113-121
150. Wang S.K., Lee S.J., Jones Jr. O.C., and Lahey Jr. R.T. 3-D turbulence structure and phase distribution measurements in bubbly two-phase flows. Int. J. Multiphase Flow 13 (1987) 327-343
151. Shultze H.D. Physico-chemical Elementary Processes in Flotation (1984), Elsevier, Amsterdam 123-129
152. Antal S.P., Lahey Jr. R.T., and Flaherty J.E. Analysis of phase distribution in fully developed laminar bubbly two-phase flow. Int. J. Multiphase Flow 17 (1991) 635-652
153. Peng X.F., and Wang B.-X. Forced convection and flow boiling heat transfer for liquid flowing through microchannels. Int. J. Heat Mass Transfer 36 (1993) 3421-3427
154. Peng X.F., Hu H.Y., and Wang B.-X. Boiling nucleation during liquid flow in microchannels. Int. J. Heat Mass Transfer 41 (1994) 101-106
155. Hosaka S., Hirata M., and Kasagi N. Forced convective subcooled boiling heat transfer and CHF in small diameter tubes. Proc., Int. Heat Transfer Conf., 9th Vol. 2 (1990) 129-134
156. Boyd R.D. Subcooled flow boiling critical heat flux (CHF) and its application to fusion energy components. Part I. A review of fundamentals of CHF and related data base. Fusion Technol. 7 (1985) 1-30
157. Boyd R.D. Subcooled flow boiling critical heat flux (CHF) and its application to fusion energy components. Part II. A review of microconvective, experimental, and correlation aspects. Fusion Technol. 7 (1985) 31-52
158. Groeneveld D.C., and Snoek C.W. A comprehensive examination of heat transfer correlations suitable for reactor safety analysis. In: Hewitt G.F., Delhaye J.M., and Zuber N. (Eds). Multiphase Science and Technology Vol. 2 (1986), Hemisphere, WA, D.C. 181-274
159. Katto Y. Critical heat flux. Int. J. Multiphase Flow 20 suppl. (1994) 53-90
160. Ornatskiy A.P. The influence of length and tube diameter on critical heat flux for water with forced convection and subcooling. Teploenergetika 4 (1960) 67-69
161. Ornatskiy A.P., and Kichigan A.M. Critical thermal loads during the boiling of subcooled water in small diameter tubes. Teploenergetika 6 (1962) 75-79
162. Ornatskiy A.P., and Vinyarskiy L.S. Heat transfer crisis in a forced flow of under heated water in small bore tubes. Teplofizika Vysokikh Temperatur 3 (1964) 444-451
163. Loomsmore C.S., and Skinner B.C. Subcooled critical heat flux for water in round tube. S. M. Thesis (1965), MIT, Cambridge, MA
164. Daleas R.S., and Bergles A.E. Effect of upstream compressibility on subcooled critical heat flux. Proc. ASME/AIChE Conf. on Heat Transfer, 65-HT-67 (1965)
165. Subbotin V.I., Deev V.I., and Arkhipov V.V. Critical heat flux in flow boiling of helium. Proc. Int. Heat Transfer Conf., 7th Vol. 4 (1982) 357-361
166. Katto Y., and Yokoya S. Critical heat flux of liquid helium (I) in forced convective boiling. Int. J. Multiphase Flow 10 (1984) 401-413
167. Boyd R.D. Subcooled water flow boiling experiments under uniform high heat flux conditions. Fusion Technol. 13 (1988) 131-142
168. Boyd R.D. Subcooled water flow boiling transition and the L/D Effect on CHF for a horizontal uniformly heated tube. Fusion Technol. 18 (1990) 317-324
169. Nariai H., Inasaka F., and Shimuara T. Critical heat flux of subcooled flow boiling in narrow tube. Proc. ASME/JSME Thermal Energy Joint Conf., 1987 Vol. 5 (1987) 455-462
170. Nariai H., Inasaka F., and Uehara K. Critical heat flux in narrow tubes with uniform heating. Heating Transfer: Japanese Research 18 (1989) 21-30
171. Inasaka F., and Nariai H. Critical heat flux of subcooled flow boiling with water for high heat flux application. SPE, High Heat Flux Eng. II Vol. 1997 (1993) 328-339
172. Celata G.P., Cumo M., and Mariani A. Burnout in highly subcooled water flow boiling in small diameter tubes. Int. J. Heat Mass Transfer 36 (1993) 1269-1285
173. Vandervort C.L., Bergles A.E., and Jensen M.K. An experimental study of critical heat flux in very high heat flux subcooled boiling. Int. J. Heat Mass Transfer 37 suppl. 1 (1994) 161-173
174. Roach Jr. G.M., Abdel-Khalik S.I., Ghiaasiaan S.M., and Jeter S.M. Low-flow critical heat flux in heated microchannels. Nucl. Sci. Eng. 131 (1999) 411-425
175. Celata G.P., Cumo M., and Mariani A. Assessment of correlations and models for the prediction of CHF in water subcooled flow boiling. Int. J. Heat Mass Transfer 37 (1994) 237-255
176. McBeth R.V., and Thompson B. Boiling water heat transfer burnout in uniformly heated round tubes: A compilation of world data with accurate correlations. UKAEA Report AEEW-R356, Winfrith, England (1964)
177. McBeth R.V. An appraisal of forced convection burnout data. Proc. Inst. Mech. Eng. 180 (1965-1966) 47-48
178. 2 (100-2500 psia). UKAEA Report AEEW-R789, Winfrith, England (1972)
179. Bergles A.E. Subcooled burnout in tubes of small diameter. ASME Paper 63-WA-182 (1962)
180. Celata G.P., Cumo M., Mariani A., Nariai H., and Inasaka F. Influence of channel diameter on subcooled flow boiling burnout at high heat fluxes. Int. J. Heat Mass Transfer 36 (1993) 3407-3409
181. Celata G.P. Recent achievements in the thermal-hydraulics of high heat flux components in fusion reactors. Exp. Therm. Fluid Sci. 7 (1993) 263-278
182. Tong L.S. Boundary layer analysis of the flow boiling crisis. Int. J. Heat Mass Transfer 11 (1969) 1208-1211
183. Hall D.D., and Mudawar I. Evaluation of subcooled CHF correlations using the PU-BTPFL CHF database for vertical upflow of water in a uniformly heated round tube. Nucl. Technol. 117 (1997) 234-246
184. Caira M., Caruso G., and Naviglio A. A correlation to predict CHF in subcooled flow boiling. Int. Comm. Heat Mass Transfer 22 (1995) 35-45
185. Shah M.M. Improved general correlation for critical heat flux during upflow in uniformly heated vertical tubes. Int. J. Heat Fluid Flow 8 (1987) 326-335
186. Weisman J. The current status of theoretically based approaches to the prediction of the critical heat flux, in flow boiling. Nucl. Technol. 99 (1992) 1-121
187. Weisman J., and Pei B.S. Prediction of critical heat flux, in flow boiling at low qualities. Int. J. Heat Mass Transfer 26 (1983) 1463-1477
188. Weisman J., and Ileslamlou S. A phenomenological model for prediction of critical heat flux under highly subcoole conditions. Fusion Technol. 13 (1988) 654-659
189. Lee C.H., and Mudawar I. A phenomenological model for prediction of critical heat flux under highly subcooled conditions. Fusion Technol. 13 (1988) 654-659
190. Galloway J.E., and Mudawar I. CHF mechanism in flow boiling from a short heated wall-I. Examination of near-wall conditions with the aid of photomicrography and high-speed video imaging. Int. J. Heat Mass Transfer 36 (1993) 2511-2526
191. Katto Y. Prediction of critical heat flux of subcooled flow boiling in round tubes. Int. J. Heat Mass Transfer 33 (1990) 1921-1928
192. Katto Y. A prediction model of subcooled flow boiling CHF for pressure in the range 0.1-20.9 MPa. Int. J. Heat Mass Transfer 35 (1992) 1115-1123
193. Celata G.P., Cumo M., Mariani A., Simoncini M., and Zummo G. Rationalization of existing mechanistic models of the prediction of water subcooled flow boiling critical heat flux. Int. J. Heat. Mass Transfer 37 Suppl. 1 (1994) 347-360
194. Ahmad S.Y. Axial distribution of bulk temperature and void fraction in a heated channel with inlet subcooling. Int. J. Heat Mass Transfer 92 (1970) 595-609
195. Haramura Y., and Katto Y. A new hydrodynamic model of critical heat flux, applicable widely to both pool and forced convection boiling on submerged bodies in saturated liquids. Int. J. Heat Mass Transfer 26 (1983) 389-399
196. Hewitt G.F., and Govan A.H. Phenomena and prediction in annular two-phase flow. ASME Advances in Gas-Liquid Flows, FED Vol. 99 (1990), ASME, New York 41-56
197. Sugawara S. Droplet deposition and entrainment modeling based on the three-fluid model. Nucl. Eng. Design 122 (1990) 67-84
198. Sugawara S. Analytical prediction of CHF by FIDAS code based on three-fluid and film dryout model. J. Nucl. Sci. Technol. 27 (1990) 12-29
199. Abdollahian D., Healzer J., Janssen E., and Amos C. Critical flow data review and analysis. Electric Power Research Institute Report EPRI NP-2192, Palo Alto, CA (1982)
200. Elias E., and Lelluche G.S. Two-phase critical flow. Int. J. Multiphase Flow 20 Suppl. 91-168 (1994)
201. Schrock V.E., Revankar S.T., and Lee S.Y. Critical flow through pipe cracks. In: Veziraglu N.T. (Ed). Particulate Phenomena and Multiphase Transport (1988), Hemisphere, New York
202. Collier R.P., and Norris D.M. Two-phase flow experiments through intergranular stress corrosion cracks. Proc. CSNI Specialist Meeting on Leak-Before Break in Nuclear Reactor Piping. U.S. Nucl. Reg. Comm. Report NUREG/CP-d005 (1983) 273-299
203. Collier R.P., Stuben F.B., Mayfield M.E., Pope D.B., and Scott P.M. Two-phase flow through intergranular stress corrosion cracks. Electric Power Research Institute Report EPRI-NP-3540-LD, Palo Alto, CA (1984)
204. Amos C.N., and Schrock V.E. Two-phase critical flow in slits. Nucl. Sci. Eng. 88 (1984) 261-274
205. Kefer V., Kastner W., and Krätzer W. Leckraten bei unterkritischen Rohrleitung srissen (1986), Jahrestagung, Kerntechnik, Aachen, Germany
206. Nabarayashi T., Ishiyama T., Fujii M., Matsumoto K., Harimizu Y., and Tanaka Y. Study on coolant leak rates through pipe cracks: Part I-Eundamental tests. Proc. ASME Pressure Vessels and Piping Conf., JSME Co-sponsorship. ASME PVP Vol. 165 (1989), ASME, New York 121-127
207. Matsumoto K., Nakamura S., Gotoh N., Nabarayashi T., Tanaka Y., and Horimizu Y. Study on coolant leak rates through pipe cracks: Part 2-Pipe test. Proc. ASME Pressure Vessels and Piping Conf., JSME Co-sponsorship. ASME PVP Vol. 165 (1989), ASME, New York 113-120
208. Ghiaasiaan S.M., Muller J.R., Sadowski D.L., and Abdel-Khalik S.I. Critical flow of initially highly subcooled water through a short capillary. Nucl. Sci. Eng. 126 (1997) 229-238
209. Richter H.J. Separated two-phase flow model: Application to critical two-phase flow. Int. J. Multiphase Flow 9 (1993) 511-530
210. Alamgir M.D., and Lienhard J.H. Correlation of pressure undershoot during hot-water depressurization. J. Heat Transfer 103 (1981) 52-55
211. Giot M., and Fritz A. Two-phase two- and one-component critical flow with the variable slip model. Prog. Heat Transfer 6 (1972) 651-670
212. Ardron K.H. A two-fluid model for critical vapor-liquid flow. Int. J. Multiphase Flow 4 (1978) 323-327
213. Bouré J.A. The critical flow phenomena with reference to two-phase flow and nuclear reactor systems. Proc. ASME Symp. Thermal-Hydraulic Aspects of Nuclear Reactor Safety (1997), ASME, New York 195-216
214. Lee S.Y., and Schrock V.E. Homogeneous non-equilibrium critical flow model for liquid stagnation states. Proc. National Heat Transfer Conf., 7th, HTD Vol. 96 (1988), ASME, New York 507-513
215. Schrock V.E., Revankar S.T., and Lee S.Y. Critical flow through pipe cracks. In: Veziroglu N.T. (Ed). Particulate Phenomena and Multiphase Transport Vol. 1 (1988), Hemisphere, Washington, D.C. 3-17
216. Feburie V., Giot M., Granger S., and Seynhaever J.M. A model for choked flow through cracks with inlet subcooling. Int. J. Multiphase Flow 19 (1993) 541-562
217. Ghiaasiaan S.M., and Geng H. Mechanistic non-equilibrium modeling of critical flashing flow of subcooled liquids containing dissolved noncondensables. Num. Heat Transfer: B 32 (1997) 435-457
218. Geng H., and Ghiaasiaan S.M. Mechanistic modeling of critical flow of initially subcooled liquid containing dissolved noncondensables through cracks and slits based on the homogeneous-equilibrium mixture method. Nucl. Sci. Eng. 129 (1998) 294-304
219. Palo Alto, CA. McFadden J.H., Paulsen M.P., Gose G.C., Peterson, McClure J.A., Jensen P.J., and Westacott J.L. RETRAN-03. A program for transient thermal-hydraulic analysis of complex fluid systems. Electric Power Research Institute Report EPRI NP-7450 Vol. 1 (1992)
220. Leung J.C., and Grolmes M.A. A generalized correlation for flashing choked flow of initially subcooled liquid. AIChE J. 34 (1988) 688-691
221. Idelchik I.E. Handbook of Hydraulic Resistances. 3rd ed. (1994), CRC Press, London
222. Moody F.J. Maximum two-phase vessel blowdown from pipes. J. Heat Transfer 88 (1966) 285-295
223. Abdolahian D., Chexial B., and Norris D.M. Prediction of leak rates through intergranular stress corrosion cracks. Proc. CSNI Leak-Before-Break Conf. Nucl. Reg. Comm. Reprt NUREG/CP-00151 (1983) 300-326
224. Henry R.E. The two-phase critical discharge of initially saturated or subcooled liquid. Nucl. Sci. Eng. 41 (1970) 336
225. Chexal B., Abdollahian D., and Norris D. Analytical prediction of single-phase and two-phase flow through cracks in pipes and tubes. AIChE Symp. Ser. 80 236 (1984) 19-23
226. Schwellnus C.F., and Shoukri M. A two-fluid model for non-equilibrium two-phase critical discharge. Can. J. Chem. Eng. 69 (1991) 187-197
227. Dagan R., Elias E., Wacholder E., and Olek S. A two-fluid model for critical flashing flows in pipes. Int. J. Multiphase Flow 19 (1993) 15-25
228. Blinkov V.N., Jones Jr. O.C., and Nigmatulin B.I. Nucleation and flashing in nozzles-2. Comparison with experiments using a five-equation model for vapor void development. Int. J. Multiphase Flow 19 (1993) 965-986
229. Downar-Zapolski Z., Bilicki Z., Bolle L., and Franco J. The non-equilibrium relaxation model for one-dimensional flashing liquid flow. Int. J. Multiphase Flow 22 (1996) 473-483
230. Kroeger P.G. Application of a non-equilibrium drift-flux model to two-phase blowdown experiments. Paper presented at OECD/NEA Specialists' Meeting on Transient Two-Phase Flow. Toronto, Canada, August 1998 (1978)
231. Lackme C. Incompleteness of the flashing, of supersaturated liquid and sonic ejection of the produced phases. Intl. J. Multiphase Flow 5 (1979) 131-141
232. Hardy Ph., and Mali P. Validation and development of a model describing subcooled critical flow through long tubes. Energie Primaire 18 (1983) 5-23
233. Garrels R.M., and Christ C.L. Solutions, Minerals and Equilibria (1965), Harper and Row, New York