Surface characterization of softwood and hardwood kraft pulp fibers from different stages in a bleaching sequence

Journal of Wood Chemistry and Technology

Volumn 24, Issue 4, 2004, Pages 307-321

  Risén, Jeanette ^a   Hultén, Anette Heijnesson ^a   Paulsson, Magnus ^a  

^a Eka Chemicals AB   (Sweden)

Author keywords

Bleaching; ESCA: Mercurization; Extractives; Hardwood kraft pulp; Hydrogen peroxide; Mechanical peeling; Oxygen delignification; Ozone; Softwood kraft pulp

Indexed keywords

BLEACHING; CHEMICAL MODIFICATION; COMPOSITION; DELIGNIFICATION; ELECTRON SPECTROSCOPY; HARDWOODS; KRAFT PULP; LIGNIN; PEELING; SOFTWOODS; SURFACE PROPERTIES; WOOD CHEMICALS;

CHEMICAL SURFACE COMPOSITION; FIBER SURFACES; HARDWOOD KRAFT PULP; KRAFT PULP FIBERS; MECHANICAL PEELING; MERCURIZATION; SOFTWOOD KRAFT PULP; SURFACE CHARACTERIZATION;

NATURAL FIBERS;

BLEACHING; CHEMICAL COMPOSITION; CHEMICAL TREATMENT; ESCA; EXTRACTIVES; HARDWOODS; HYDROGEN PEROXIDE; KRAFT PULPS; LIGNIN CONTENT; MULTISTAGE PROCESS; OXYGEN DELIGNIFICATION; OZONE; PEELING; SOFTWOODS; SURFACE PROPERTIES; WOOD FIBERS;

EID: 11844253836     PISSN: 02773813     EISSN: None     Source Type: Journal    
DOI: 10.1081/WCT-200046243     Document Type: Article

References (35)

1. Dorris, G.M.; Gray, D.G. The surface analysis of paper and wood fibres by ESCA. I. Application to cellulose and lignin. Cellul. Chem. Technol. 1978, 12 (1), 9-23.
2. Mjöberg, P.J. Chemical surface analysis of wood fibers by means of ESCA. Cell. Chem. Technol. 1981, 15 (5), 481-486.
3. Laine, J.; Stenius, P.; Carlsson, G.; Ström, G. Surface characterization of unbleached kraft pulps by means of ESCA. Cellulose 1994, 1 (2), 145-160.
4. Laine, J.; Stenius, P. Surface Properties of Bleached Kraft Pulp Fibres and Their Comparison with the Properties of the Final Paper Products. 8th International Symposium on Wood and Pulping Chemistry, Helsinki, Finland, Jun 6-9, 1995; 1, 589-596.
5. Laine, J.; Stenius, P.; Carlsson, G.; Ström. G. The effect of ECF and TCF bleaching on the surface chemical composition of kraft pulp as determined by ESCA. Nord. Pulp Pap. Res. J. 1996. 11 (3), 201-210.
6. Westermark, U. The Content of Lignin on Pulp Fiber Surfaces. Proceedings of the 10th International Symposium on Wood and Pulping Chemistry, Yokohama, Japan, Jun 7-10, 1999; 1, 40-42.
7. Österberg, M. On the Interactions in Cellulose Systems: Surface Forces and Adsorption; The Royal Institute of Technology: Stockholm, Sweden, 2000.
8. Duchesne, I., Daniel, G., Van Leerdam, G.C., Basta, J. Surface chemical composition and morphology of ITC kraft fibres as determined by XPS and FE-SEM. J. Pulp Pap. Sci. 2003, 29 (3), 71-76.
9. Kleen, M.; Sjöberg, J.; Dahlman, O.; Johansson, L.S.; Koljonen, K.; Stenius, P. The effect of ECF and TCF bleaching on the chemical composition of soda-anthraquinone and kraft pulp surfaces. Nord. Pulp Pap. Res. J. 2002, 17 (3), 357-363.
10. Heijnesson Hultén, A.; Paulsson, M. Surface characterization of unbleached and oxygen delignified kraft pulp fibers. J. Wood Chem. Technol. 2003, 23 (1), 29-44.
11. Ström, G.; Carlsson, G. Wettability of kraft pulps - effects of surface composition and oxygen plasma treatment. J. Adhesion Sci. Technol. 1992, 6, 745-762.
12. Freudenberg, K., Neish, A.C., Eds. Constitution and Biosynthesis of Lignin; Springer-Verlag: Berlin, Germany, 1968.
13. Westermark, U.; Lidbrandt, O.; Eriksson, I. Lignin distribution in spruce (Picea abies) determined by mercurization with SEM-EDXA technique. Wood Sci. Technol. 1988, 22 (3), 243-250.
14. Eriksson, I.; Lidbrandt, O.; Westermark, U. Lignin distribution in birch (Betula verrucosa) as determined by mercurization with SEM - and TEM-EDXA. Wood Sci. Technol. 1988, 22 (3), 251-257.
15. Freudenberg, K.; Sohns, F.; Düirr, W.; Niemann, C. Über lignin coniferylalkohol und saligenin. Cellulosechemie 1931, 12, 263-275.
16. Björkman, A.; Person, B. Studies on finely divided wood. Part 2. The properties of lignins exracted with neutral solvents from softwoods and hardwoods. Svensk Papperstidn. 1957, 60 (5), 158-169.
17. Buchert, J.; Carlsson, G.; Viikari, L.; Ström, G. Surface characterization of unbleached kraft pulps by enzymatic peeling and ESCA. Holzforschung 1996, 50 (1), 69-74.
18. Kallmes, O. Distribution of constituents across the wall of unbleached spruce sulfite fibers. Tappi 1960, 13 (2), 143-152.
19. Krause, T. Änderung der morphologischen structur und chemischen zusammensetzung von zellstoff-fasern bei mechanischer abschlägung der äusseren wandschichten. Das Papier 1967, 21 (7), 385-393.
20. Kibblewhite, R.P.; Brookes, D. Distribution of chemical components in the walls of kraft and bisulphite pulp fibres. Wood Sci. Technol. 1976, 10 (1), 39-46.
21. Lindström, T.; Glad-Nordmark, G. Chemical characterization of the fines fraction from unbleached kraft pulps. Svensk Papperstidn. 1978 81 (15), 489-492.
22. Treimanis, A.P.; Purina, L.T., Ioelovich, M.J. Localization of Residual Lignin in Pulp Fibre Walls and its Influence upon the Crystallinity Parameters of Different Cell Wall Layers, 1st European Workshop on Lignocellulosics and Pulp, Hamburg, Germany, May 18-20, 1990; 256-265.
23. Heijnesson, A.; Westermark, U.; Simonson, R. Removal of lignin-rich surface material from unbleached kraft fibres. Holzforschung 1995, 49 (4), 313-318.
24. Suurnäkki, A.; Heijnesson, A.; Buchert, J.; Viikari, L.; Westermark, U. Chemical characterization of the surface layers of unbleached pine and birch kraft pulp fibres. J. Pulp Pap. Sci. 1996, 22 (2 , 43-47.
25. Sjöberg, J.; Kleen, M.; Dahlman, O.; Agnemo, R.; Sundvall, H. Analyses of carbohydrates and lignin in the surface and inner layers of softwood pulp fibers obtained employing various alkaline cooking processes. Nord. Pulp Pap. Res. J. 2002, 17 (3), 295-301.
26. Risén, J.; Heijnesson Hultén, A.; Paulsson, M. The influence of fiber properties on the network strength on hardwood and softwood kraft pulp fibers from different stages of a bleaching sequence. J. Wood Chem. Technol. 2003, Submitted for publication.
27. Dence, C.W. The determination of lignin. In Methods in Lignin Chemistry; Lin, S.Y., Dence, C.W., Eds.; Springer-Verlag: Berlin, Germany, 1992; 33-61.
28. Hardell, H.L.; Leary, G.J.; Stoll, M.; Westermark, U. Variations in lignin structure in defined morphological parts of spruce. Svensk Papperstidn. 1980, 83 (2), 44-49.
29. Fardim, P.; Gustafsson, J.; von Schoultz, S.; Peltonen, J.; Holmbom, B. Extractives on Fibre Surfaces Studied by XPS, ToF-SIMS and Different Extraction Methods, 7th European Workshop on Lignocellulosics and Pulp, Turku, Finland, Aug 26-29, 2002; 451-454.
30. Backman, L.; Gellerstedt, G. Reaction of Kraft Pulp Lignin with Alkaline Hydrogen Peroxide, 7th International Symposium on Wood and Pulping Chemistry, Beijing, China, May 25-28, 1993, 1; 223-229.
31. Swanson, J.W.; Cordingly, S. Surface chemical studies on pitch. II. The mechanism of the loss of absorbency and development of self-sizing in papers made from wood pulps. Tappi J. 1959, 42 (19), 812-819.
32. Aberson, G.M. In The Physics and Chemistry of Wood Pulp Fibers; Page, D.H., Ed.; TAPPI STAP: New York, 1970; 282(8).
33. Allen, L.H.; Lapointe, C.L. Physical distribution of resin in bleached kraft pulp mills. Pulp Pap. Can. 1987, 88 (12), 231, 232 and 234-239.
34. Ström, G.; Lindström, M.; Stenius, P.; Ödberg, L. Surface chemical aspects of the behavior of soaps in pulp washing. Nord. Pulp Pap. Res. J. 1990, 5 (1), 44-51.
35. Lindholm, C.A.; Malkov, S. Resorption of dissolved organic material in acid TCF bleaching stages. Nord. Pulp Pap. Res. J. 1997, 12 (1), 4-8.