Thermomechanical finite-element model of shell behavior in continuous casting of steel

Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science

Volumn 35, Issue 6, 2004, Pages 1151-1172

  Li, Chunsheng ^a   Thomas, Brian G ^a  

^a UNIVERSITY OF ILLINOIS AT URBANA CHAMPAIGN   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

ALGORITHMS; COMPUTER SIMULATION; CONTINUOUS CASTING; FINITE ELEMENT METHOD; HEAT TRANSFER; MATHEMATICAL MODELS; OPTIMIZATION; STRESS ANALYSIS;

LINEAR EXPANSION; SHELL BEHAVIOR; STRESS MODELING; THERMAL DISTORTION;

STEEL;

EID: 11344264696     PISSN: 10735615     EISSN: None     Source Type: Journal    
DOI: 10.1007/s11663-004-0071-z     Document Type: Article

References (75)

1. W.R. Storkman: Masters Thesis, University of Illinois, at Urbana-Champaign, Urbana, IL, 1990.
2. A. Moitra: Ph.D. Thesis, Urbana-Champaign, Urbana, IL, 1993, p. 217.
3. H. Zhu: Ph.D. Thesis, Urbana-Champaign, Urbana, IL, 1996, p. 132.
4. J.-C.T. Parkman: Master's Thesis, UIUC, Urbana, IL, 2000, p. 139.
5. W.R. Storkman and B.G. Thomas: in Modeling of Casting and Welding Processes, A.G. Giamei and G.J. Abbaschian, eds., Engineering Foundation, Palm Coast, FL, 1988, vol. 4, pp. 287-97.
6. A. Moitra, B.G. Thomas, and H. Zhu: in 76th Steelmaking Conf., Dallas, TX, 1993, ISS, Warrendale, PA, 1993, vol. 76, p. 657.
7. B.G. Thomas, A. Moitra, and W.R. Storkman: Proc., 6th Int. Iron and Steel Congr., Iron and Steel Institute Japan, Tokyo, 1990, vol. 3, pp. 348-55.
8. B.G. Thomas and H. Zhu: Proc. Int. Symp. on Advanced Materials and Technologies for 21st Century, I. Ohnaka and D. Stefanescu, eds., TMS, Warrendale, PA, 1996, pp. 197-208.
9. G.D. Lawson, S.C. Sander, W.H. Emling, A. Moitra, and B.G. Thomas: 77th Steelmaking Conf., Chicago, IL, 1994, Iron and Steel Society, Warrendale, PA, 1994, p. 239.
10. B.G. Thomas, A. Moitra, and R. McDavid: ISS Trans., 1996, vol. 23 (4), pp. 57-70.
11. B.G. Thomas and J.T. Parkman: Thermec '97, Int. Conf. on Thermomechanical Processing of Steel and Other Materials, Wollongong, Australia, 1997, TMS, Warrendale, PA, 1997, vol. II, pp. 2279-85.
12. B.G. Thomas and J.T. Parkman: TMS Annual Meeting, TMS, Warrendale, PA, San Antonio, TX, 1998, M.C.A.E. Lavernia, ed.
13. A. Grill, J.K. Brimacombe, and F. Weinberg: Ironmaking and Steelmaking, 1976, vol. 3 (1), pp. 38-47.
14. K. Sorimachi and J.K. Brimacombe: Ironmaking and Steelmaking, 1977, vol. 4 (4), pp. 240-45.
15. J.O. Kristiansson: J. Thermal Stresses, 1984, vol. 7, pp. 209-26.
16. J.E. Kelly, K.P. Michalek, T.G. O'Connor, B.G. Thomas, and J.A. Dantzig: Metall. Trans. A, 1988, vol. 19A, pp. 2589-2602.
17. J.R. Boehmer, G. Funk, M. Jordan, and F.N. Fett: Adv. Eng. Software, 1998, vol. 29 (7-9), pp. 679-97.
18. J.-k. Park, B.G. Thomas, and I.V. Samarasekera: Ironmaking and Steelmaking, 2002, vol. 29 (5), pp. 359-75.
19. M. Bellet, V.D. Fachinotti, O. Jaouen, S. De La Chapelle, I. Poitrault: in Modeling of Casting, Welding and Advanced Solidification Processes-X, D. Stefanescu, J. Warren, M. Jolly, and M. Krane, eds., TMS, Warrendale, PA, 2003, pp. 361-68.
20. J.-E. Lee, T.-J. Yeo, K.H. Oh, J.-K. Yoon, and U.-S. Yoon: Metall. Mater. Trans. A, 2000, vol. 31 A, pp. 225-37.
21. K. Sorimachi and T. Emi:Tetsu-to-Hagané (J. Iron Steel Inst. Jpn.), 1977, vol. 63 (8), pp. 1297-1304.
22. A. Grill and K. Schwerdtfeger: Ironmaking and Steelmaking, 1979, vol. 6(3), pp. 131-35.
23. K. Kinoshita, T. Emi, and M. Kasai: Tetsu-to-Hagané, 1979, vol. 1979 (14), p. 2022.
24. F.G. Rammerstorfer, C. Jaquemar, D.F. Fischer, and H. Wiesinger: in Numerical Methods in Thermal Problems, R.W. Lewis and K. Morgan, eds., Pineridge Press, Swansea, U.K., 1979, pp. 712-22.
25. J.O. Kristiansson: J. Thermal Stresses, 1982, vol. 5 (3-4), pp. 315-30.
26. I. Ohnaka and Y. Yashima: in Modeling and Control of Casting and Welding Processes IV, Palm Coast, FL, 1988, TMS/AIME, Warrendale, PA, 1988, pp. 385-94.
27. T.C. Tszeng and S. Kobayashi: Int. J. Machine Tools and Manufacture (Int. J. Machining Tools Manufacturing), 1989, vol. 29 (1), pp. 121-40.
28. H. Zhu: Ph.D. Thesis, University of Illinois, at Urbana-Champaign, Urbana, IL, 1997.
29. J. Parkman: Master's Thesis, University of Illinois, 2000.
30. C. Li and B.G. Thomas: Brimacombe Memorial Symp., Vancouver, Canada, Canadian Institute of Mining and Metallurgy, Montreal, Canada, 2000, p. 17.
31. A.E. Huespe, A. Cardona, and V. Fachinotti: Computer Methods Appl. Mech. Eng., 2000, vol. 182 (3), pp. 439-55.
32. A. Ramacciotti: Steel Res., 1988, vol. 59 (10), pp. 438-48.
33. T.G. O'Conner: Ph.D. Thesis, University of Illinois, at Urbana-Champaign, Urbana, IL, 1992.
34. J.-K. Park: Ph.D. Thesis, University of British Columbia, 2002.
35. B.G. Thomas: 74th Steelmaking Conf. Proc., ISS, Warrendale, PA, 1991, vol. 74, pp. 105-18.
36. B.G. Thomas: in Making, Shaping and Treating of Steel: Continuous Casting, A. Cramb, ed., AISE Steel Foundation, Pittsburgh, PA, 2003, vol. 5, pp. 5.1-5.24.
37. B.G. Thomas and L. Zhang: Iron Steel Inst. Jpn. Int., 2001, vol. 41 (10), pp. 1185-97.
38. Y.M. Won and B.G. Thomas: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 1755-67.
39. B.G. Thomas, G. Li, A. Moitra, and D. Habing: Iron Steelmaker (ISS Trans.), 1998, vol. 25 (10), pp. 125-43.
40. B.G. Thomas: Metall. Mater. Trans. B, 2002, vol. 33B, pp. 795-812.
41. L. Yu: Master's Thesis, University of Illinois, at Urbana-Champaign, Urbana, IL, 2000.
42. Y. Won, T.-J. Yeo, D. Seol, and K. Oh: Metall. Mater. Trans. B, 2000, vol. 31 B, pp. 779-94.
43. J.A. Dantzig and C.L. Tucker: Modeling in Materials Processing, Cambridge University Press, New York, NY, 2001.
44. O.C. Zienkiewicz and R.L. Taylor: The Finite Element Method, 5th ed., Butterworth-Heinemann, Oxford, Boston, MA, 2000, vol. 1, p. 689.
45. J. Lemaitre and J.L. Chaboche: Mechanics of Solid Materials, Cambridge University Press, New York, NY, 1990, p. 556.
46. R.C. Weast: Handbook of Chemistry and Physics, 1971.
47. E. Lemmon: in Numerical Methods in Heat Transfer, R.W. Lewis, K. Morgan, and O.C. Zienkiewicz, eds., John Wiley & Sons, New York, NY, 1981, vol. 1, pp. 201-13.
48. T. Dupont, G. Fairweather, and J.P. Johnson: SIAM J. Numerical Analysis, 1974, vol. 11 (2), pp. 392-410.
49. G.E. Forsythe and C.B. Moler: Prentice-Hall Series in Automatic Computation, Prentice-Hall, Englewood Cliffs, NJ, 1967.
50. A.M. Lush, G. Weber, and L. Anand: Int. J. Plasticity, 1989, vol. 5, pp. 521-49.
51. Y. Meng and B.G. Thomas: Metall. Trans. B, 2003, vol. 34B, pp. 685-705.
52. B.G. Thomas, G. Li, A. Moitra, and D. Habing: 80th Steelmaking Conf. Proc., ISS, Warrendale, PA, 1997, vol. 80, pp. 183-201.
53. B. Nour-Omid and P. Wriggers: Computer Methods Appl. Mech. Eng., 1986, vol. 54, pp. 131-44.
54. J.M. Khodadadi, X.K. Lan, and F. Shen: ASME, New York, NY, American Society, 28th National Heat Transfer Conf. Exhib., San Diego, CA, 1992, vol. 196, pp. 59-67.
55. X. Huang, B.G. Thomas, and F.M. Najjar: Metall. Trans. B, 1992, vol. 23B, pp. 339-56.
56. Y.M. Won, K.-h. Kim, T.-j. Yeo, and K.H. Oh: Iron Steel Inst. Jpn. Int., 1998, vol. 38 (10), pp. 1093-99.
57. M.C. Flemings: Solidification Processing, McGraw-Hill Series in Mater-ials Science and Engineering, M.B. Bever, M.E. Shank, C.A. Wert, and R.F. Mehl, eds., McGraw-Hill, New York, NY, 1974, p. 364.
58. K. Harste: Ph.D. Thesis, Technical University of Clausthal, Clausthal, 1989, p. 115.
59. K. Harste, A. Jablonka, and K. Schwerdtfeger: 4th Int. Conf. Continuous Casting, Brussels, Belgium, Verlag Stahleisen, Dusseldorf 1988, vol. 2, pp. 633-44.
60. I. Jimbo and A.A.W. Cramb: Metall. Trans. B, 1993, vol. 24B, pp. 5-10.
61. P. Kozlowski, B.G. Thomas; J. Azzi, and H. Wang: Metall. Trans. A, 1992, vol. 23A, pp. 903-18.
62. P.J. Wray: Metall. Trans. A, 1976, vol. 7A, pp. 1621-27.
63. P.J. Wray: Metall. Trans. A, 1982, vol. 13A, pp. 125-34.
64. T. Suzuki, K.H. Tacke, K. Wunnenberg, and K. Schwerdtfeger: Ironmaking Steelmaking, 1988, vol. 15 (2), pp. 90-100.
65. H. Mizukami, K. Murakami, and Y. Miyashita: Tetsu-to-Hagané (J. Iron Steel Inst. Jpn.), 1977, vol. 63 (146), p. S-652.
66. C. Li and B.G. Thomas: in Steelmaking Conf. Proc., ISS, Warrendale, PA, 2002, vol. 85, pp. 109-30.
67. J.H. Weiner and B.A. Boley: J. Mech. Phys. Solids, 1963, vol. 11, pp. 145-54.
68. T. Mathworks Inc.: MATLAB User Manual, Natick, MA, 1999, Ver. 5.3.
69. J.K. Park, C. Li, B.G. Thomas, and I.V. Samarasekera: 60th Electric Furnace Conf., San Antonio, TX, 2002, AIST, Warrendale, PA, 2002, vol. 60, p. 17.
70. C. Chow: Master's Thesis, University of British Columbia, 2001.
71. C. Li and B.G. Thomas: Steelmaking Conf. Proc., ISS, Warrendale, PA, 2003, vol. 86.
72. C. Ojeda and B.G. Thomas: ISSTech 2003, Indianapolis, IN, 2003, ISS, Warrendale, PA, 2003.
73. R.D. Cook, D.S. Malkus, and M.E. Plesha: Concepts and Applications of Finite Element Analysis, 3rd ed., John Wiley & Sons, New York, NY, 1989, p. 630.
74. T.W. Clyne, M. Wolf, and W. Kurz: Metall. Mater. Trans. B, 1982, vol. 13B, pp. 259-66.
75. Y. Meng, C. Li, J. Parkman, and B.G. Thomas: in Solidification Processes and Microstructures: A Symposium in Honor of Prof. W. Kurz, M. Rappaz, C. Beckermann, and R. Trivedi, eds., TMS, Warrendale, PA, 2004, pp. 33-39.