Heat-Transfer and Solidification Model of Continuous Slab Casting: CON1D

Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science

Volumn 34, Issue 5, 2003, Pages 685-705

  Meng, Ya ^a   Thomas, Brian G ^a  

^a UNIVERSITY OF ILLINOIS AT URBANA CHAMPAIGN   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

FINITE DIFFERENCE METHOD; HEAT CONDUCTION; HEAT FLUX; MATHEMATICAL MODELS; PHASE INTERFACES; SHELL MOLD CASTING; SLAGS; SOLIDIFICATION; THERMAL EFFECTS; TURBULENT FLOW;

RESOLIDIFICATION;

CONTINUOUS CASTING;

EID: 0142200435     PISSN: 10735615     EISSN: None     Source Type: Journal    
DOI: 10.1007/s11663-003-0040-y     Document Type: Article

References (85)

1. F.M. Najjar, B.G. Thomas, and D.E. Hershey: Metall. Mater. Trans. B, 1995, vol. 26B, pp. 749-65.
2. K.C. Mills: Steel Technol. Int., 1994, pp. 161-66.
3. R.J. O'Malley: "An Examination of Mold Flux Film Structures and Mold Gap Behavior Using Mold Thermal Monitoring and Petrographic Analysis at Armco's Mansfield Operations", Proc. METEC Congress 99, (Dusseldorf, Germany, 13-15 June, 1999), Verein Deutscher Eisenhuttenleute, Dusseldorf, FRG, 1999.
4. R.J. O'Malley: 82nd Steelmaking Conf., Chicago, IL, 21-24 Mar., 1999, ISS/AIME, Warrendale, PA, 1999, vol. 82, pp. 13-33.
5. A. Yamauchi, K. Sorimachi, T. Sakuraya and T. Fujii: Iron Steel Inst. Jen. Int., 1993, vol. 33 (1), pp. 140-47.
6. J. Cho, H. Shibata, T. Emi, and M. Suzuki: Iron Steel Inst. Jpn. Int., 1998, vol. 38 (5), pp. 440-46.
7. M.S. Bhamra, M.G. Charlesworth, S. Wong, D. Sawyers-Villers, and A.W. Cramb: 54th Electric Furnace Conf., Dallas, TX, 9-12 Dec., 1996, ISS/AIME, Warrendale, PA, 1996, vol. 54, pp. 551-64.
8. C. Orrling, A.W. Cramb, A. Tilliander, and Y. Kashiwaya: Iron Steelmaker, 2000, vol. 27 (1), pp. 53-63.
9. Y. Kashiwaya, C.E. Cicutti, and A.W. Cramb: Iron Steel Inst. Jpn. Int., 1998, vol. 38 (4), pp. 357-65.
10. B.G. Thomas, G. Li, A. Moitra, and D. Habing: 80th Steelmaking Conf., Chicago, IL, 1997, vol. 80, pp. 183-201.
11. X. Huang, B.G. Thomas, and F.M. Najjar: Metall. Mater. Trans. B 1992, vol. 23B, pp. 339-56.
12. A. Moitra and B.G. Thomas: 76th Steelmaking Conf., Dallas, TX, 28-31 Mar., 1993, ISS, Warrendale, PA, 1993, vol. 76, pp. 657-67.
13. B.G. Thomas: 1991 Steelmaking Conf., ISS, Warrendale, PA, 1991, pp. 69-82.
14. B.G. Thomas and L. Zhang: Iron Steel Inst. Jpn. Int. 2001, vol. 41 (10), pp. 1181-93.
15. B.G. Thomas: Metall. Mater. Trans. B, 2002, vol. 33B, pp. 795-812.
16. E.A. Mizikar: Trans. TMS-AIME 1967, vol. 239 (11), pp. 1747-58.
17. J.E. Lait, J.K. Brimacombe, and F. Weinberg: Ironmaking and Steelmaking, 1974, vol. 1 (2), pp. 90-97.
18. E.A. Upton, T.R.S. Rao, P.H. Dauby, and R.C. Knechtges: Iron Steelmaker, 1988, vol. 15 (5), pp. 51-57.
19. R. Davies, N. Blake, and P. Campbell: 4th Int. Conf. Continuous Casting, Preprints, Vol. 2, Brussels, Belgium, 17-19 May, 1988, VS, Dusseldorf, FRG, 1988, vol. 2, pp. 645-54.
20. R.B. Mahapatra, J.K. Brimacombe, I.V. Samarasekera, N. Walker, E.A. Paterson, and J.D. Young: Metall. Trans. B, 1991, vol. 22B, pp. 861-74.
21. J.K. Brimacombe: Can. Metall. Q., 1976, vol. 15 (2), pp. 163-75.
22. M.R. Aboutalebi, R.I.L. Guthrie, and M. Hasan: Steel Res., 1994, vol. 65 (6), pp. 225-33.
23. F. Wimmer, H. Thone, and B. Lindorfer: Berg. Huttenmannische Monatshefte, 1996, vol. 141 (5), pp. 185-91.
24. H. Nam, H.S. Park, and J.K. Yoon: Iron Steel Inst. Jpn. Int., 2000, vol. 40 (9), pp. 886-92.
25. S.K. Choudhary and D. Mazumdar: Iron Steel Inst. Jpn. Int., 1994, vol. 34 (7), pp. 584-92.
26. B.G. Thomas, R.J. O'Malley, T. Shi, Y. Meng, D. Creech, and D. Stone: Modeling of Casting, Welding and Advanced Solidification Process IX, Aachen, Germany, 20-25 Aug., 2000, TMS, Warrendale, PA, 2000, pp. 769-76.
27. J.E. Lee, T.J. Yeo, K.H. Oh, J.K. Yoon, and U.S. Yoon: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 225-37.
28. C. Ohler, H.J. Odenthal, H. Pfeifer, and I. Lemanowicz: Stahl Eisen., 2002, vol. 122 (3), pp. 55-63.
29. B.G. Thomas, W.R. Storkman, and A. Moitra; IISC 6th Int. Iron and Steel Congr., Nagoya, Japan, 21-26 Oct., 1990, ISIJ, Tokyo, Japan, 1990, vol 3, Steelmaking I, pp. 348-55.
30. C. Li and B.G. Thomas: Brimacombe Memorial Symp., Vancouver, BC, Canada, 1-4 Oct., 2000, CIMMP, Montreal, PQ, Canada, 2000, pp. 595-611.
31. B.G. Thomas, A. Moitra, and R. McDavid: Iron Steelmaker, 1996, vol. 23 (4), pp. 57-70.
32. J.K. Park, I.V. Samarasekera, B.G. Thomas, and U.S. Yoon: 83rd Steelmaking Conf., Pittsburgh, PA, 26-29 Mar., 2000, ISS/AIME, Warrendale, PA, 2000, vol. 83, pp. 9-21.
33. C.A.M. Pinheiro, I.V. Samarasekera, and B.N. Walker: Ironmaking and Steelmaking, 2000, vol. 27 (1), pp. 37-54.
34. S. Chandra, J.K. Brimacombe, and I.V. Samarasekera: Ironmaking and Steelmaking, 1993, vol. 20 (2), pp. 104-12.
35. F. Wimmer, H. Thone, and B. Lindorfer: Int. Conf. on Modelling and Simulation in Metallurgical Engineering and Materials Science, Beijing, China, 11-13 June, 1996, Metall. Industry Press, Beijing, China, 1996, pp. 366-71.
36. N. Tiedje and E.W. Langer: Scand. J. Metall., 1992, vol. 21 (5), pp. 211-17.
37. R. Bommaraju and E. Saad: 73th Steelmaking Conf., Detroit, MI, 25-28, Mar., 1990, ISS, Warrendale, PA, 1990, vol. 73, pp. 281-96.
38. J.A. DiLellio and G.W. Young: Metall. Mater. Trans. B 1995, vol. 26B, pp. 1225-1441.
39. J.F. Chavez, A. Celaya, M.A. Barron, and R.D. Morales: 79th Conf. of the Steelmaking Division of the Iron and Steel Society, Pittsburgh, PA, 24-27 Mar., 1996, ISS/AIME, Warrendale, PA, 1996, vol. 79, pp. 321-29.
40. G.J.W. Kor: Continuous Casting of Steel, 2nd Process Technology Conf., Chicago, II, 23-25 Feb., 1981, ISS/AIME, Warrendale, PA, 1981, vol. 2, pp. 124-32.
41. K. Nakajima: Curr. Adv. Mater. Processing 1992, vol. 5 (4), pp. 1221-24.
42. T. Cimarelli: Metal Italiana, 1997, vol. 89 (9), pp. 31-37.
43. D.R. Bland: IMA J. Appl Math., 1984, vol. 32, pp. 89-112.
44. K. Harste: Ph.D. Dissertation, Technical University of Clausthal, Clausthal, 1989.
45. R.D. Pehlke, A. Jeyarajan, and H. Wada: Report No. NSFMEA82028, University of Michigan, Ann Arbor, MI, 1982.
46. H. Shibata, K. Kondo, and M. Suzuki: Iron Steel Inst. Jpn. Int., 1996, vol. 35, Suppl., pp. S179-S182.
47. B. Ho: Master's Thesis, University of Chicago, Urbana, IL, 1992.
48. K. Ichikawa, A. Morita, and Y. Kawabe: Shinagawa Techn. Rep., 1993, vol. 36, pp. 99-107.
49. K. Watanabe, M. Suzuki, K. Murakami, H. Kondo, A. Miyamoto, and T. Shiomi: NKK Techn, Rev., 1997, vol. 77, pp. 20-26.
50. R. Taylor and K.C. Mills: Ironmaking and Steelmaking, 1988, vol. 15 (4), pp. 187-94.
51. A.C. Mikrovas, S.A. Argyropoulos, and I.D. Sommerville: Iron Steelmaker, 1991, vol. 18 (12), pp. 51-61.
52. M.S. Jenkins: in Continuous Casting, vol. 9, Initial Solidification and Strand Surface Quality of Peritectic Steels, ISS-AIME, Warrendale, PA, 1997, pp. 239-44.
53. M.D. Lanyi and C.J. Rosa: Metall. Trans. B, 1981, vol. 12B (2), pp. 287-98.
54. D. Larson: Ind. Heating, 1986, vol. 53 (4), pp. 16-17.
55. Y. Meng and B.G. Thomas: Metall. Mater. Trans. B, 2003, vol. 34B, pp. 707-25.
56. H.S. Carslaw and J.C. Jaeger: Conduction of Heat in Solids, 2nd ed., Oxford University Press, Oxford, United Kingdom, 1986.
57. L.C. Burmesiter: Convective Heat Transfer, 2nd ed., Wiley, New York, NY, 1993, p. 484.
58. C.A. Sleicher and M.W. Rouse: Int. J. Heat Mass Transfer, 1975, vol. 18 (5), pp. 677-83.
59. F.W. Dittus and L.M.K. Boelter: Univ. Calif. Publ. Eng., 1930, No. 2, pp. 443-61.
60. M.M. Langeneckert: Master's Thesis, University of Illinois, Urbana, IL, 2001.
61. J.K. Brimacombe, P.K. Agarwal, S. Hibbins, B. Prabhaker, and L.A. Baptista: Continuous Casting, ISS/AIME, Warrendale, PA, 1984, vol. 2, pp. 109-23.
62. T. Nozaki: Iron Steel Inst. Jpn. Trans., 1978, vol. 18, pp. 330-38.
63. R.A. Hardin, H. Shen, and C. Beckermann: Modelling of Casting, Welding and Advanced Solidification Processes IX, 20-25 Aug., 2000, TMS, Warrendale, PA, 2000.
64. R.D. Pehlke: Engineering Summer Conf.: Continuous Casting of Steel, Univ. of Michigan, Ann Arbor, MI, 1980, Section VII, pp. 1-17.
65. V.R. Voller, C.R. Swaminathan, and B.C. Thomas: Int. J. Num. Methods in Eng., 1990, vol. 30, pp. 875-98.
66. B.C. Thomas and Y. Meng: CON1D Users Manual, University of Illinois, Urbana, IL, 2002.
67. A. Kagawa and T. Okamoto: Mater. Sci. Technol., 1986, vol. 2 (10), pp. 997-1008.
68. Y.M. Won and B.G. Thomas: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 1755-67.
69. G. Li: Ph.D. Thesis, University of Illinois, Urbana, IL, 1996.
70. B.G. Thomas and T. Morthland: "3-D Heat Transfer Analysis of Columbus Slab Casting Mold," CCC Report 2001, Univ. of Ill., Urbana, IL.
71. B.G. Thomas, B. Ho, and G. Li: Alex McLean Symp.: Process Fundamentals, Liquid Metal Processing for Cleanliness, Novel and Conventional Casting, and Novel Process Technologies, Toronto, ON, Canada, 1998, pp. 177-93.
72. D.R. Poirier and G.H. Geiger: Transport Phenomena in Materials Processing, TMS, Warrendaler, PA, 1994, p. 339.
73. B.G. Thomas, D. Lui, and B. Ho: Sensors and Modeling in Materials Processing: Techniques and Applications, Orlando, FL, 1997, pp. 117-42.
74. M.M. Collur: "Use of CONID Model to Determine if the Casting Speed can be Increased for Chrome-Nickel Grades at 8-3 Caster," Report, Allegheny Ludlum Corporation Technical Center, Brackenridge, PA, 1996.
75. J. Paidipati, B. Sharos, C. Slayton, and J. Wood: Report No. 6: ME280 Final Report, University of Illinois, Urbana, IL, 2002.
76. J.K. Park: Ph.D. Thesis, University of British Columbia, Vancouver, BC, Canada, 2002.
77. B.G. Thomas: 79th Conf. of the Steelmaking Division of the Iron and Steel Society, Pittsburgh, PA, 24-27 Mar., 1996, ISS/AIME, Warrendale, PA, 1996, pp. 519-31.
78. J.K. Park, B.G. Thomas, and I.V. Samarasekera: Ironmaking and Steelmaking, 2002, vol. 29(5), pp. 359-75.
79. R. Sobolewski, S.C. Sander, J.G. Kuczma, and A.J. Rumler: Steelmaking Conf. Proc., Detroit, MI, 1990, vol. 73, pp. 275-80.
80. I.V. Samarasekera and J.K. Brimacombe: Ironmaking and Steelmaking, 1982, vol. 9 (1), pp. 1-15.
81. A. Moitra: Ph.D Thesis, University of Illinois, Urbana-Champaign, IL, 1993.
82. G.D. Lawson, S.C. Sander, W.H. Emling, A. Montra, and B.G. Thomas: 77th Steelmaking Conf., Chicago, IL, 20-23 Mar., 1994, ISS/AIME, Warrendale, PA, 1994, vol. 77, pp. 329-36.
83. CRC Handbook of Chemistry and Physics, R.C. Weast, ed., Chemical Rubber Co., Cleveland, OH, 1971.
84. R.J. Dippenaar, I.V. Samarasekera, and J.K. Brimacombe: ISS Trans., 1986, No. 7, pp. 31-43.
85. B.G. Thomas, M. Langeneckert, L. Castella, M. Dziuba, G.D. Gresia and W. Balante: Ironmaking and Steelmaking, 2003, vol. 30 (3), pp. 1-5.