Characteristics of the liquid film and pressure drop in horizontal, annular, two-phase flow through round, square and triangular tubes

Journal of Fluids Engineering, Transactions of the ASME

Volumn 126, Issue 5, 2004, Pages 807-817

  Shedd, Timothy A ^a   Newell, Ty A ^a,b  

^a University of Wisconsin Madison   (United States)

^b UNIVERSITY OF ILLINOIS AT URBANA CHAMPAIGN   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

ANNULAR FLOWS; LIQUID FILMS; MAGNITUDE ANALYSIS; PLATE-FIN EXCHANGERS; VAPOR FLOWS;

ASPECT RATIO; COMPUTER SIMULATION; ELECTRIC IMPEDANCE; MASS TRANSFER; PRESSURE DROP; REYNOLDS NUMBER; SEALANTS; THIN FILMS;

TWO PHASE FLOW;

EID: 11144311819     PISSN: 00982202     EISSN: None     Source Type: Journal    
DOI: 10.1115/1.1792261     Document Type: Article

References (47)

1. Leung, C. W., and Probert, S. D., 1997, "Forced-convective turbulent-flows through horizontal ducts with isosceles-triangular internal cross-sections," Appl. Energy, 57, No. 1, pp. 13-24.
2. Mayinger, F., and Klas, J., 1992, "Compact heat exchangers." In Heat Trans fer; 3rd UK National Conference, Vol. 1. Institute of Chemical Engineers, Warwickshire, UK, pp. 35-49.
3. Zietlow, D. C., and Pedersen, C. O., 1995, "Heat transfer and flow characteristics of condensing refrigerants in small-channel cross-flow heat exchangers," Tech. Rep. TR-73, Air Conditioning and Refrigeration Center, University of Illinois at Urbana-Champaign, Urbana, IL.
4. Webb, R. L., 1990, Principles of Enhanced Heat Transfer, Wiley, New York.
5. Barnea, D., and Taitel, Y., 1986, Encyclopedia of Fluid Mechanics, Vol. 3, Gulf Publishing Company, Houston, TX, pp. 403-474.
6. Dallman, J. C., 1978, "Investigation of Separated Flow Model in Annular Gas-Liquid Two-Phase Flows," Ph.D. thesis, University of Illinois at Urbana-Champaign, Urbana, IL.
7. Hewitt, G. F., and Hall-Taylor, N. S., 1970, Annular Two-Phase Flow, Pergamon, Oxford, England.
8. Hetsroni, G., Ed., 1982, Handbook of Multiphase Systems. Hemisphere, Washington, DC.
9. Fukano, T., Akenaga, H., Ikeda, M., Itoh, A., Kuriwaki, T., and Takamatsu, Y., 1984, "Liquid film flowing concurrently with air in horizontal duct (4th report, effect of the geometry of duct cross-section on liquid film flow)," Bull. JSME, 27, No. 230, pp. 1644-1651.
10. Fukano, T., Sakamoto, T., Tominaga, A., and Katoh, E., 1987, "Experimental study on the flow mechanism of a thin liquid film flowing concurrently with a high speed gas flow in a horizontal rectangular duct," Proceedings of the 1987 ASME-JSME Thermal Engineering Joint Conference, Vol. 5, pp. 351-357.
11. Fukano, T., Nakagawa, H., Mori, Y., and Watanabe, M., 1997, "Liquid film formation on the inner surface of the horizontal channel," Nucl. Eng. Des., 175, pp. 3-13.
12. Troniewski, L., and Ulbrich, R., 1984, "Flow regime maps and pressure drop in two-phase gas-liquid flow in a rectangular channel," in Multi-Phase Flow and Heat Transfer III. Part A: Fundamentals, T. N. Veziroǧlu and A. E. Bergles, Eds., Elsevier Science, Amsterdam, pp. 155-166.
13. Rush, T. A., Newell, T. A., and Jacobi, A. M., 1999, "An experimental study of flow and heat transfer in sinusoidal wavy passages," Int. J. Heat Mass Transfer, 42, pp. 1541-1553.
14. Colebrook, C. F., 1938-39, "Turbulent flow in pipes, with particular reference to the transistion region between smooth and rough pipe laws," J. Instit. Civil Eng., 11, pp. 133-156.
15. Taylor, B. N., and Kuyatt, C. E., 1994, "Guidelines for evaluating and expressing uncertainty of NIST measurement results," Tech. Rep. 1297, National Institute of Standards and Technology, Bethesda, MD.
16. Hurlburt, E. T., and Newell, T. A., 1996, "Optical measurement of liquid film thickness and wave velocity in liquid film flows," Exp. Fluids, 21, No. 5, pp. 357-362.
17. Shedd, T. A., and Newell, T. A., 1998, "Automated optical liquid film thickness measurement method," Rev. Sci. Instrum., 69, No. 12, pp. 4205-4213.
18. Rodriguez, D. J., 2004, "Characterization of bubble entrainment, interfacial roughness, and the sliding bubble mechanism in horizontal annular flow," Ph.D. thesis, University of Wisconsin-Madison, Madison, Wisconsin, USA.
19. Rodíguez, D. J., and Shedd, T. A., 2004, "Cross-sectional imaging of the liquid film in horizontal two-phase annular flow," in 2004 ASME Heat Transfer/Fluids Engineering Summer Conference, Paper 56445.
20. Shedd, T. A., 2001, "Characteristics of the Liquid Film in Horizontal Two-Phase Annular Flow," Ph.D. thesis, University of Illinois at Urbana-Champaign, Urbana, IL.
21. Martinelli, R. C., and Nelson, D. B., 1948, "Prediction of pressure drop during forced-circulation boiling of water," Trans. ASME, 70, pp. 695-702.
22. Hurlburt, E. T., and Newell, T. A., 2000, "Prediction of the circumferential film thickness distribution in horizontal annular gas-liquid flow," ASME J. Fluids Eng., 122, pp. 1-7.
23. Hewitt, G. F., and Lacey, P. M. C., 1965, "The breakdown of the liquid film in annular two-phase flow," Int. J. Heat Mass Transfer, 8, pp. 781-791.
24. Schadel, S. A., 1988, "Rate of atomization and drop size in annular two-phase flow," Ph.D. thesis, University of Illinois at Urbana-Champaign, Urbana, Illinois.
25. Andreussi, P., Asali, J. C., and Hanratty, T. J., 1985, "Initiation of roll waves in gas-liquid flows," AIChE J., 31, pp. 119-126.
26. Dobran, F., 1983, "Hydrodynamic and heat transfer analysis of two-phase annular flow with a new liquid film model of turbulence," Int. J. Heat Mass Transfer, 26, No. 8, pp. 1159-1171.
27. Dobran, F., 1985, "Heat transfer in an annular two-phase flow," ASME J. Heat Transfer, 107, pp. 472-476.
28. Leuthner, S., Maun, A. H., and Auracher, H., 1999, "Influence of waves on heat transfer to falling films of a binary mixture," in Two-Phase Flow Modelling and Experimentation 1999, G. P. Celata, P. D. Marco, and R. K. Shah, Eds., Vol. 2, Edizioni ETS, Pisa, pp. 1241-1247.
29. Nikuradse, J., 1930, "Untersuchungen über turbulente Strömungen in nicht kreisförmigen rohren," Ingenieur-Archiv, 1, pp. 306-332.
30. Gessner, F. B., and Jones, J. B., 1965, "On some aspects of fully-developed turbulent flow in rectangular channels," J. Fluid Mech., 23, No. 4, pp. 689-713.
31. Gessner, F. B., 1973, "The origin of secondary flow in turbulent flow along a corner," J. Fluid Mech., 58, No. 1, pp. 1-25.
32. Melling, A., and Whitelaw, J. H., 1976, "Turbulent flow in a rectangular duct," J. Fluid Mech., 78, No. 2, pp. 289-315.
33. Goldstein, R. J., Jabbari, M. Y., and Brekke, J. P., 1992, "The near-corner mass transfer associated with turbulent flow in a square duct," Wärme-und Stoffübertragung, 27, pp. 265-272.
34. Darling, R. S., and McManus, H. N., 1968, "Flow patterns in circular ducts with circumferential variation of roughness: a two-phase flow analog," Proceedings of the 11th Mid-Western Mechanics Conference (Developments in Mechanics), Vol. 5, pp. 153-170.
35. Dykhno, L. A., Williams, L. R., and Hanratty, T. J., 1994, "Maps of mean gas velocity for stratified flows with and without atomization," Int. J. Multiphase Flow, 20, No. 4, pp. 691-702.
36. Flores, A. G., Crowe, K. E., and Griffith, P., 1995, "Gas-phase secondary flow in horizontal, stratified and annular two-phase flow," Int. J. Multiphase Flow, 21, No. 2, pp. 207-221.
37. Pletcher, R. H., and McManus, Jr., H. N., 1965, "The fluid dynamics of three dimensional liquid films with free surface shear: A finite difference approach," Proceedings of the 9th Mid-Western Conference on Mechanics (Developments in Mechanics), Vol. 3, pp. 305-318.
38. Butterworth, D., 1972, "Air-water annular flow in a horizontal tube," Prog. Heat Mass Transfer, 6. pp. 235-251.
39. Laurinat, J. E., Hanratty, T. J., and Jepson, W. P., 1985, "Film thickness distribution for gas-liquid annular flow in a horizontal pipe," PCH, PhysicoChem. Hydrodyn., 6. No. 1, 2, pp. 179-195.
40. Lin, T. F., Jones, O. C., Lahey, R. T., Block, R. C., and Murase, M., 1985, "Film thickness measurements and modelling in horizontal annular flows," PCH, PhysicoChem. Hydrodyn., 6, No. 1/2, pp. 197-206.
41. James, P. W., Wilkes, N. S., Conkie, W., and Burns, A., 1987, "Developments in the modelling of horizontal annular two-phase flow," Int. J. Multiphase Flow, 13, No. 2, pp. 173-198.
42. Jayanti, S., Wilkes, N. S., Clarke, D. S., and Hewitt, G. F., 1990, "The prediction of turbulent flows over roughened surfaces and its application to interpretation of mechanisms of horizontal annular flow," Proc. R. Soc. London, Ser. A, 431, pp. 71-88.
43. Leutheusser, H. J., 1963, "Turbulent flow in rectangular ducts," J. Hydraul. Div., Am. Soc. Civ. Eng., HY3, pp. 1-19.
44. Wallis, G. B., 1969, One-dimensional Two-phase Flow, McGraw-Hill, New York.
45. Henstock, W. H., and Hanratty, T. J., 1976, "The interfacial drag and the height of the wall layer in annular flows." AIChE J., 22, No. 6, pp. 990-1000.
46. Collier, J. G., and Thome, J. R., 1994, Convective Boiling and Condensation, 3rd ed., Oxford U.P. Oxford.
47. Wilson, M. J., 2001, "Two-phase flow through flattened tubes," Ph.D. thesis, University of Illinois at Urbana-Champaign, Urbana, IL.