Topology optimization of dielectric substrates for filters and antennas using SIMP

Archives of Computational Methods in Engineering

Volumn 11, Issue 4, 2004, Pages 355-388

  Kiziltas, G ^a   Kikuchi, N ^b   Volakis, J L ^a   Halloran, J ^b  

^a The Ohio State University   (United States)

^b UNIVERSITY OF MICHIGAN   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

ANTENNAS; BANDWIDTH; DIELECTRIC MATERIALS; FINITE ELEMENT METHOD; LINEAR PROGRAMMING; OPTIMIZATION; SENSITIVITY ANALYSIS; SUBSTRATES; TEXTURES; TOPOLOGY;

DIELECTRIC SUBSTRATES; METAMATERIAL SUBSTRATES; PRINTED CONDUCTOR TOPOLOGIES; SOLID ISOTROPIC MATERIAL WITH PENALIZATION (SIMP);

MAGNETIC FILTERS;

EID: 11044237478     PISSN: 11343060     EISSN: None     Source Type: Journal    
DOI: 10.1007/BF02736229     Document Type: Review

References (127)

1. Kyriazidiou, C.A., Diaz, R.E. and Alexopoulos, N.G. (2000). Novel material with narrow-band transparency window in the bulk. IEEE Trans. on Antennas and Propagation, 48, (1), 107-116.
2. Smith, D.R., Vier, D.C., Kroll N. and Schultz, S. (2000). Direct calculation of permeability and permittivity for a left-handed metamaterial. Applied Physics Letters, 77, (14), 2246-2248.
3. Gauthier, G.P., Courtay, A. and Rebeiz, G.M. (1997). Microstrip antennas on synthesized low dielectric-constant substrates. IEEE Trans. on Antennas and Propagation, 45, (8), 1310-1314.
4. Johnson, J.M. and Rahmat-Samii, Y. (1999). Genetic algorithms and method of moments (GA/MoM) for the design of integrated antennas. IEEE Trans. on. Antennas and Propagation, 47, (10), 1606-1614.
5. Michielssen, E., Sajer, J.M., Ranjithan, S. and Mittra, R. (1993). Design of light-weight, broadband microwave absorbers using genetic algorithms. IEEE Trans. on Microwaves Theory and Techniques, 41, (6/7), 1024-1031.
6. Li, Z., Erdemli, Y.E., Volakis, J.L. and Papalambros, P.Y. (2002). Design optimization of conformal antennas by integrating stochastic algorithms with the hybrid finite element method. IEEE Trans. on AP, 50, (5), 676-684.
7. Li, Z., Volakis, J.L. and Papalambros, P.Y. (1997). Designing broad-band patch antennas using the sequential quadratic programming method. IEEE Trans. on Antennas and Propagation, 45, (11), 1689-1692.
8. Dyck, D.N., Lowther, D.A. and Freeman, E.M. (1994). A method of computing the sensitivity in electromagnetic quantities to changes in materials and sources. IEEE Trans. on Magnetics, 30, (5), 3415-3418.
9. Yoo, J., Kikuchi, N. and Volakis, J.L. (2000). Structural optimization in magnetic devices by the homogenization design method. IEEE Trans. on Magnetics, 36, (3), 574-580.
10. Maxwell, J.C. (1873). A Treatise on Electricity and Magnetism, Oxford: Clarendon Press.
11. Lagrange, J.L. (1770). In Royal Society of Turin, 123.
12. Marrocco, A. and Pironneau, O. (1978). Optimum design with lagrangian finite elements: design of an electromagnet. Comput. Methods Appl. Mech. Eng., 15, 277-308.
13. Hadamard, J. (1932). Le probleme de Cauchy et les equations aux derivees partielles lineaires hyperboliques. Hermann, Paris.
14. Rao, S. (1996). Engineering Optimization: Theory and Practice. 3rd ed., Wiley, New York.
15. Nakata, T. and Takahashi, N. (1983). New design method of permanent magnets by using the finite element method. IEEE Trans. on Magnetics, 19, 2494-249.
16. Hoole, S., Ratnajeevan, H., Subramaniam, S., Saldanha, R., Coulomb, J.L. and Sabonnadiere, J.C. (1991). Inverse problem methodology and finite elements in the identification of cracks, sources, materials, and their geometry in inaccessible locations. IEEE Trans. on Magnetics, 27, 3433-3443.
17. Davis, L. (1987). Genetic Algorithms and Simulated Annealing, Pitman, London.
18. Holland, J. (1975). Adaptation in Natural and Artificial Systems. University of Michigan Press, Ann Arbor.
19. Haupt, R. (1995). An introduction of genetic algorithms for electromagnetics. IEEE Antennas and Propagation Magazine, 37, (2), 7-15.
20. Johnson, J.M. and Rahmat-Samii, Y. (1997). Genetic algorithms in engineering electromagnetics. IEEE Antennas and Propagation Magazine, 39, (4), 7-25.
21. Johnson, J.M. and Rahmat-Samii, Y. (1994). Genetic algorithm optimization and its application to antenna design. IEEE Antennas and Propagation International Symposium, Seattle, WA, USA.
22. Simkin, J. and Trowbridge, C.W. (1991). Optimizing electromagnetic devices combining direct search methods with simulated annealing. Computation of Electromagnetic Fields (COMPUMAG), Sorrento, Italy.
23. Gottvald, A., Preis, K., Magele, C., Biro, O. and Savini, A. (1991). Global optimization methods for computational electromagnetics. Computation of Electromagnetic Fields (COMPUMAG), Sorrento, Italy.
24. Xueying, J., Xueqin, S. and Qingxin, Y. (1993). The application of expert system to electromagnet design. International Conference on Electromagnetic Field Problems and Applications, Beijing, 1993.
25. Mohammed, O.A., Park, D.C., Uler, F.G. and Ziqiang, C. (1992). Design optimization of electromagnetic devices using artificial neural networks. International Magnetics Conference (INTERMAG'92), St. Louis, MO, USA.
26. Enokizono, M. and Tsuchida, Y. (1994). Optimal design by boundary element method with fuzzy inference. 9th Conference on the Computation of Electromagnetic Fields (COMPUMAG'93), Miami, FL, USA.
27. Vivier, S., Gillon, F. and Brochet, P. (2001). Optimization techniques derived from experimental design method and their application to the design of a brushless direct current motor. IEEE Trans. on Magnetics, 37, 3622-3626.
28. Gillon, F. and Brochet, P. (2000). Screening and Response Surface Method applied to the numerical optimization of electromagnetic devices. 12th Conference of the Computation of Electromagnetic Fields (COMPUMAG'99), Sapporo, Japan.
29. Preis, K., Magele, C. and Biro, O. (1990). FEM and evolution strategies in the optimal design of electromagnetic devices. International Magnetics Conference INTERMAG, Brighton, UK.
30. Bellina, F., Campostrini, P., Chitarin, G., Stella, A. and Trevisan, F. (1991). Automated optimal design techniques for inverse electromagnetic problems. Computation of Electromagnetic Fields (COMPUMAG), Sorrento, Italy.
31. Sikora, J., Stodolski, M. and Wincenciak, S. (1988). Comparative analysis of numerical methods for shape designing. In Electromagnetic Fields in Electrical Engineering. A. Savini and J. Turowski (ed.), Plenum Press, New York, 293-298.
32. Li, Z., Papalambros, P.Y. and Volakis, J.L. (2002). Frequency selective surface design by integrating optimization algorithms with fast numerical methods. IEE Proceedings-Microwaves, Antennas and Propagation, 149, (3), 175-180.
33. Pawluk, K. and Rudnicki, M. (1988). The state of art in the synthesis of electromagnetic fields. In Electromagnetic Fields in Electrical Engineering. A. Savini and J. Turowski (ed.), Plenum Press, New York, 287-292.
34. Guarnieri, M. Stella, A. and Trevisan, F. (1990). A methodological analysis of different formulations for solving inverse electromagnetic problems. IEEE Trans. on Magnetics, 26, 622-625.
35. Takahashi, N. (1990). Optimal design method of magnetic circuit. COMPEL - The International Journal for Computation and Mathematics in Electrical and Electronic Engineering, 9, 101-6.
36. Borghi, C.A., Di Barba, P., Fabbri, A., Rudnicki, M. and Savini, A. (2000). A benchmark problem in inverse magnetostatics solved by different multi-objective optimisation methods. International Journal of Applied Electromagnetics and Mechanics, 12, 219-27.
37. Neittaanmaki, P., Rudnicki, M. and Savini, A. (1996). Inverse Problems and Optimal Design in Electricity and Magnetism. Vol. 1., Clarendon Press, Oxford, U.K.
38. Armstrong, A., Fan, M., Simkin, J. and Trowbridge, C.W. (1981). Automated optimization of magnet design using the boundary integral method. Conference on the Computation of Electromagnetic Fields, Chicago, IL, USA.
39. Di Barba, P., Navarra, P., Savini, A. and Sikora, R. (1990). Optimum design of iron-core electromagnets. Conference of the Computation of Electromagnetic Fields, Tokyo, Japan.
40. Di Barba, P. and Savini, A. (1999). Optimal shape design of an iron-cored electromagnet: A further benchmark problem in magnetostatics. International Journal of Applied Electromagnetics and Mechanics, 10, 371-379.
41. Takahashi, N., Nakata, T. and Uchiyama, N. (1989). Optimal design method of 3-D nonlinear magnetic circuit by using magnetization integral equation method. International Magnetics Conference, Washington, DC, USA.
42. Gottvald, A. (1989). Optimal magnet design for NMR. Conference on the Computation of Electromagnetic Fields (COMPUMAG), Tokyo, Japan.
43. Iwamura, Y. and Miya, K. (1989). Numerical approach to inverse problem of crack shape recognition based on the electrical potential method (of NDT). Conference on the Computation of Electromagnetic Fields (COMPUMAG), Tokyo, Japan.
44. Hoole, S., Ratnajeevan, H. and Subramaniam, S. (1992). Inverse problems with boundary elements: Synthesizing a capacitor. COMPUMAG Conference on the Computation of Electromagnetic Fields, Naples, Italy.
45. Caminhas, W.M., Saldanha, R.R. and Mateus, G.R. (1990). Optimization methods used for determining the geometry of shielding electrodes. IEEE Trans. on Magnetics, 26, 642-645.
46. Tsuboi, M. and Misaki, T. (1988). The optimum design of electrode and insulator contours by nonlinear programming using the surface charge simulation method. IEEE Trans. on Magnetics, 24, 35-38.
47. Sikora, J., Skoczylas, J., Sroka, J. and Wincenciak, S. (1985). The use of the singular value decomposition method in the synthesis of the Neumann's boundary problem. COMPEL - The International Journal for Computation and Mathematics in Electrical and Electronic Engineering, 4, 19-27.
48. Liu, J., Freeman, E.M., Yang, X. and Jianni, S. (1990). Optimization of electrode shape using the boundary element method. IEEE Trans. on Magnetics, 26, 2184-2186.
49. Sikora, J. (1989). Minimax approach to the optimal shape designing of the electromagnetic devices. COMPEL-The International Journal for Computation and Mathematics in Electrical and Electronic Engineering, 8, 162-175.
50. Franzone, P.C. (1980). Regularization methods applied to an inverse problem in electrocardiology. In Computing methods in applied sciences and engineering, R. Glowinski and J.L. Lions (eds.), North-Holland, New York, 615-633.
51. Duan, D.W. and Rahmat-Samii, Y. (1995). Generalized diffraction synthesis technique for high performance reflector antennas. IEEE Trans. on Antennas and Propagation, 43, 27-40.
52. Haupt, R L. (1994). Thinned arrays using genetic algorithms. IEEE Trans. on Antennas and Propagation, 42, 993-999.
53. Linden, D.S. and Altshuler, E.F. (1996). Automating wire antenna design using genetic algorithms. Microwave Journal, 39, 7.
54. Davis, D., Chan, C. and Hwang, J. (1991). Frequency selective surface design using neural networks inversion based on parameterized representations. Antennas and Propagation Society Symposium London, Ont., Can., 1, 200-203.
55. Erdemli, Y., Sertel, K., Gilbert, R.A., Wright, D.E. and Volakis, J. (2002). Frequency selective surfaces to enhance performance of broadband reconfigurable arrays. IEEE Trans. on Antennas and Propagation, 50, (2), 1716-1724.
56. Knott, E.F., Schaeffer, J.F. and Tuley, M.T. (1985). Radar Cross Section- its Prediction Measurement and Reduction. Artech House.
57. Ilavarasan, P., Rothwell, E.J., Chen, K. and Nyquist, D.P. (1995). Natural resonance extraction from multiple data sets using genetic algorithm. IEEE Trans. on Antennas and Propagation, 43, 900-904.
58. Rekanos, I.T. (2002). Inverse scattering in the time domain: An iterative method using an FDTD sensitivity analysis scheme. IEEE Trans. on Magnetics, 38, 1117-1120.
59. Kohn, R.V. and Strang, G. (1986). Optimal design and relaxation of variational problems. Comm. Pure Appl. Math., 39, 1-25 (Part I), 353-377 (Part II).
60. Galileo, G. (1638). Discorsi e dimostrazioni matematiche. Leiden.
61. Courant, R. (1943). Variational methods for the solution of problems of equilibrium and vibration. Bull. Am. Math. Society, 49, 1-23.
62. Clough, R.W. (1960). The finite element in plane stress analysis. Proc. 2nd ASCE Conference on Electronic Computation, Pittsburgh, PA, USA.
63. Zienkiewicz, O.C. (1971). The Finite Element Method in Engineering Science. McGraw Hill, London.
64. Schmit, L.A. (1960). Structural design by systematic synthesis. Proc. 2nd ASCE Conference on Electric Computations, Pittsburgh, PA.
65. Zienkiewicz, O.C., Taylor, R.L. and Too, J.M. (1971). Reduced integration technique in general analysis of plates and shells. Int. J. Numer. Methods Eng., 3, 275-90.
66. Venkayya, V.B. (1978). Structural Optimization: A Review and Some Recommendations. Int. J. Numer. Methods Eng., 13, 203-228.
67. Olhoff, N. and Taylor, J.E. (1983). On Structural Optimization. J. Appl. Mech. Trans. ASME, 50, 1139-1151.
68. Haslinger, J. and Neittaanmaki, P. (1988). Finite Element Approximation for Optimal Shape Design: Theory and Applications. Wiley, Chichester.
69. Weeber, K., Ratnajeevan, S. and H. Hoole. (1993). Structural design optimization as a technology source for developments in the electromagnetics domain. 5th Biennial IEEE Conference on Electromagnetic Field Computation, Claremont, CA, USA.
70. Michell, A.G.M. (1904). The limits economy in frame structures. Philo. Mag., 8, 589-597.
71. Rozvany, G.I.N. (1972). Grillages of maximum strength and maximum stiffness. Int. J. Mech. Sci., 14, 651-666.
72. Rozvany, G.I.N., Zhou, M. and Birker, T. (1992). Generalized shape optimization without homo-genization. Structural Optimization, 4, 250-252.
73. Rozvany, G.I.N. (2001). Aims, scope, methods, history and unified terminology of computer-aided topology optimization in structural mechanics. Structural and Multidisciplinary Optimization, 21, 90-108.
74. Bendsoe, M.P. and Kikuchi, N. (1988). Generating optimal topologies in structural design using a homogenization method. Comp. Meth. Appl. Mech. Engng., 71, 197-224.
75. Diaz, A. and Kikuchi, N. (1992). Solutions to shape and topology eigenvalue optimization problems using a homogenization method. Int. J. Numer. Methods Eng., 35, 1487-1502.
76. Bendsoe, M.P. (1989). Methods for the Optimization of Structural Topology, Shape and Material. Springer, New York.
77. Haber, R.B., Bendsoe, M.P. and Jog, C.S (1996). A new approach to variable topology shape design using a constraint on the perimeter. Structural Optimization, 11, 1-12.
78. Allaire, G. and Kohn, R. (1993). Explicit bounds on the elastic energy of a two-phase composite in two space dimensions. Q. Appl. Math., 51, 675-699.
79. Bendsoe, M.P. (1989). Optimal shape design as a material distribution problem. Structural Optimization, 1, 193-202.
80. Yang, R.J. and Chahande, A.I. (1995). Automotive applications of topology optimization. Structural Optimization, 9, 245-249.
81. Bendsoe, M.P. (1995). Optimization of Structural Topology, Shape and Material. Springer, Berlin.
82. Sankaranarayanan, S., Haftka, R.T. and Kapania, R.K. (1993). Truss topology optimization with simultaneous analysis and design. Structural Dyn. Mat. Conf., Dallas.
83. Bruns, T.E. and Tortorelli, D.A. (2001). Topology optimization of non-linear elastic structures and compliant mechanisms. Computer Methods in Applied Mechanics and Engineering, 190, 3443-3459.
84. Ansanthasuresh, G.K. (1994). A new design paradigm for micro-electro mechanical systems and investigations on the compliant mechanism synthesis. In Mechanical Engineering. University of Michigan, Ann Arbor.
85. Hetrick, J.A., Kikuchi, N. and Kota, S. (1999). Robustness of compliant mechanism topology optimization formulations. Smart Structures and Materials-Mathematics and Control in Smart Structures, Newport Beach, CA, USA.
86. Ma, Z.D., Kikuchi, N. and Hagiwara, I. (1993). Structural topology and shape optimization for a frequency response problem. Computational Mechanics, 13, 157-174.
87. Bloembaum, B. (1999). The use of structural optimization in automotive design-state of the art and vision. WCSMO-3, Buffalo.
88. Hassani, H. and Hinton, E. (1998). Homogenization and Structural Topology Optimization Theory, Practice and Software. Springer, Berlin.
89. Silva, E.C.N., Fonseca, J.S.O. and Kikuchi, N. (1997). Optimal design of piezoelectric microstructures. Comp. Mechanics, 19, 397-410.
90. Dyck, D.N. and Lowther, D.A. (1996). Automated design of magnetic devices by optimizing material distribution. IEEE Transactions on Magnetics, 32, 1188-1193.
91. Gitosusastro, S., Coulomb, J.I. and Sabonnadiere, J.C. (1988). Performance derivative calculations and optimization process. Third Biennial Conference on Electromagnetic Field Computation, Washington, DC, USA.
92. Dyck, D.N., Lowther, D.A. and Freeman, E.M. (1994). A method of computing the sensitivity of electromagnetic quantities to changes in materials and sources. IEEE Trans. on Magnetics, 30, 3415-3418.
93. Byun, J.K. and Hahn, S.Y. (1999). Topology optimization of electrical devices using mutual energy and sensitivity. IEEE Trans. on Magnetics, 35, 3718-3720.
94. Wang, S. and Kang, J. (2002). Topology optimization of nonlinear magnetostatics. IEEE Trans. on Magnetics, 38, 1029-1032.
95. Byun, J.K., Lee, J.H., Park, I.H., Lee, H.B., Choi, K. and Hahn, S.Y. (2000). Inverse problem application of topology optimization method with mutual energy concept and design sensitivity. IEEE Trans. on Magnetics, 36, 1144-1147.
96. Koh, C.S. and Hahn, S.Y. (1993). A continuum approach in shape design sensitivity analysis of magnetostatic problems using the boundary element method. IEEE Trans. on Magnetics, 23, 1771-1774.
97. Park, I.H., Lee, H.B., Kwak, I.G. and Hahn, S.Y. (1994). Design sensitivity analysis for steady state eddy current problems by continuum approach. 9th Conference on the Computation of Electromagnetic Fields (COMPUMAG'93), Miami, Fl, USA.
98. Dyck, D.N. (1995). Automating the topological design of magnetic devices. In Electrical Engineering, McGill University.
99. Lee, H.B. (1995). Computer aided optimal design methods for waveguide structures. Seoul National University.
100. Dyck, D.N. and Lowther, D.A. (1997). Composite microstructure of permeable material for the optimized material distribution method of automated design. IEEE Trans. on Magnetics, 33, 1828-1831.
101. Choi, S.H.E., Lowther, D.A. and Dyck, D.N. (1997). Determining boundary shapes from the optimized material distribution system, 11th International Conference on Computation of Electromagnetic Fields (COMPUMAG), Rio de Janeiro, Brazil.
102. Dyck, D.N. and Lowther, D.A. (1998). Response surface modelling of magnetic device performance using function value and gradient. International Journal of Applied Electromagnetics and Mechanics, 9, 241-248.
103. Chung, Y.S., Cheon, C. and Hahn, S.Y. (2000). Reconstruction of dielectric cylinders using FDTD and topology optimization technique. IEEE Trans. on Magnetics, 34, 956-959.
104. Chung, Y.S. and Cheon, C. (2001). Optimal shape design of dielectric structure using FDTD and topology optimization. International Microwave Symposium, Phoenix, AZ, USA.
105. Wang, S. and Kim, C. (2000). A study on the topology optimization of electromagnetic systems. CEFC 2000.
106. Bossavit, A. (1994). Effective penetration depth in spatially periodic grids: a novel approach to homogenization. International Symposium on Electromagnetic Compatibility, Rome, Italy.
107. Gong, J., Volakis, J.L., Woo, A.C. and Wang, H.T.G. (1994). Hybrid finite element-boundary integral method for the analysis of cavity-backed antennas of arbitrary shape. IEEE Trans. on Antennas and Propagation, 42, 1233-1242.
108. Jin, J.M. and Volakis, J.L. (1991). A finite-element-boundary integral formulation for scattering by three-dimensional cavity-backed apertures. IEEE Trans. on Antennas and Propagation, 39, (1), 97-104.
109. Lucas, E.W. and Fontana, T.P. (1995). 3-D hybrid finite element/boundary element method for the unified radiation and scattering analysis of general infinite periodic arrays. IEEE Trans. on Antennas and Propagation, 43, 145-153.
110. Volakis, J., Chatterjee, A. and Kempel, L. (1998). Finite Element Method for Electromagnetics: Antennas, Microwave Circuits and Scattering Applications. IEEE Press, New York.
111. Sigmund, O. and Petersson, J. (1998). Numerical instabilities in topology optimization: a survey on procedures dealing with checkerboards, mesh-dependencies and local minima. Structural Optimization, 16, 68-75.
112. Hanson, R. and Hiebert, K. (1981). A sparse linear programming subprogram. Sandia National Laboratories SAND81-0297.
113. Schittkowski, K., Zillober, C. and Zotemantel, R. (1994). Numerical comparison of nonlinear programming algorithms for structural optimization. Structural Optimization, 7, 1-19.
114. Thomas, H.L., Vanderplaats, G.N. and Shyy, Y.K. (1992). A study of move-limit adjustment strategies in the approximation concepts approach to structural analysis. 4th AIAA/USAF/NASA/OAI Symposium on Multidisciplinary Analysis and Optimization, Cleveland, Ohio.
115. Director, S.W. and Rohrer, R.A. (1972). Introduction to Systems Theory. McGraw-Hill Series in Electronics Systems. McGraw-Hill Book Co, New York.
116. Kiziltas, G. (2003). Dielectric material optimization of niters and antennas using SIMP. In Mechanical Engineering, The University of Michigan, Ann Arbor.
117. Zurcher, J.F. and Gardiol, F.E. (1995). Broadband Patch Antennas. Artech House, Inc., Norwood, MA.
118. Hansen, R.C. (1981). Fundamental limitations on antennas. Proceedings of IEEE, 69, 170-182.
119. Lee, H.F. and Chen, W. (1997). Advances in Microstrip and Printed Antennas. Wiley, New York.
120. Lech, M., Mitchell, A. and Waterhouse, R. (2000). Optimization of broadband microstrip patch antennas. Asia-Pacific Microwave Conference, Sydney, NSW, Australia.
121. Koh, B.Y., Halloran, J.W., Knapp, A.M., Volakis, J., Kiziltas, G. and Psychoudakis, D. (2003). Textured dielectric meta-materials for miniaturized antennas: fabrication of dielectric LTCC-polymer by thermoplastic green machining. 105th Annual Meeting & Exposition of The American Ceramic Society, Nashville, TN.
122. Weile, D. and Michielssen, E. (1999). Design of doubly periodic filter and polarizer structures using a hybridized genetic algorithm. Radio Science, 34, 51-63.
123. Wu, T.K. (1995). Frequency Selective Surface and Grid Array. Wiley, New York.
124. Weile, D.S. and Michielssen, E. (1997). Evolutionary optimization of electromagnetic devices using advanced operators and population structures. Antennas and Propagation Society International Symposium, Montreal, Que., Canada.
125. Wu, T.K. and Lee, S.W. (1994). Multiband frequency selective surface with multiring patch elements. IEEE Trans. on Antennas and Propagation, 42, 1484-1490.
126. Munk, B.A. (2000). Frequency Selective Surfaces: Theory and Design. Wiley, New York.
127. Spector, S.J., Astolfi, D.K., Doran, S.P., Lyszczarz, T.M. and Raynolds, J.E. (2001). Infrared Frequency Selective Surfaces Fabricated Using Optical Lithography and Phase Shift Masks. J. Vac. Sci. Technol. B., 19, (6), 2757-2760.