Modeling the nanoindentation of elastoplastic materials with nonlinear adaptive springs (NASs)

IEEE Transactions on Nanotechnology

Volumn 3, Issue 4, 2004, Pages 451-461

  Attaf, Mohammed T ^a,b  

^a UNIVERSITÉ DU QUÉBEC À MONTRÉAL   (Canada)

^b ÉCOLE POLYTECHNIQUE DE MONTRÉAL   (Canada)

Author keywords

Electroplastic materials; Hardness testing; Materials properties; Mechanical properties; Mechanical testing; Nanoindentation

Indexed keywords

APPROXIMATION THEORY; DATA REDUCTION; HARDNESS TESTING; INDENTATION; MECHANICAL PROPERTIES; NANOTECHNOLOGY; SILICA; TITANIUM DIOXIDE;

ELECTROPLASTIC MATERIALS; MATERIALS PROPERTIES; NANOINDENTATION; TANTALUM PENTOXIDE (TA2O5);

ELASTOPLASTICITY;

EID: 10944232676     PISSN: 1536125X     EISSN: None     Source Type: Journal    
DOI: 10.1109/TNANO.2004.834182     Document Type: Article

References (29)

1. I. N. Sneddon, "The relation between load and penetration in the axisymmetric Boussinesq problem for a punch of arbitrary profile," Int. J. Eng. Sci., vol. 8, pp. 47-57, 1968.
2. I. N. Sneddon, R. Hill, and S. C. Hunter, Progress in Solid Mechanics. Amsterdam, The Netherlands: North Holland, 1964.
3. D. Tabor, The Hardness of Metals. Oxford, U.K.: Clarendon Press, 1951.
4. W. C. Oliver and G. M. Pharr, "An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments," J. Mater. Res., vol. 7, no. 6, pp. 1564-1583, June 1972.
5. M. T. Attaf, "New ceramics related investigation of the indentation energy concept," Mater. Lett., vol. 57, pp. 4684-4693, 2003.
6. _, "A unified aspect of power-law correlations for Berkovich hardness testing of ceramics," Mater. Lett., vol. 57, pp. 4627-4638, 2003.
7. _, "Step by step building of a model for the Berkovich indentation cycle," Mater. Lett., vol. 58, pp. 507-512, 2004.
8. _, "New formulation of the nanomechanical quantities using the beta-material concept and the indentation function," Mater. Lett., vol. 58, pp. 889-894, 2004.
9. _, "Tip bluntness determination using the energy principle and consequent correction to the indentation function," Mater. Lett., vol. 58, pp. 1100-1106, 2004.
10. J. H. Pointing and J. J. Thomson, Properties of Matter, 10th ed. Edinburg, TX: Neill & Co., 1924.
11. _, Electricity and Magnetism, 3th ed. Edinburg, TX: Neill & Co., 1924.
12. W.-X. Ren, X. Tan, and Z. Zheng, "Nonlinear analysis of plane frames using rigid body-spring discrete element method," Compta. Structures, vol. 71, pp. 105-119, 1999.
13. K. L. Johnson, K. Kendall, and A. D. Roberts, "Surface energy and the contact of elastic solids," in Proc. R. Soc. Land. A, Math. Phys. Sci., vol. A324, 1971, pp. 301-313.
14. A. Kozak, H. Sedarat, and A. Krimotat, "Alameda tubes seismic retrofit studies," Comput. Structures, vol. 72, pp. 233-252, 1999.
15. J. Oman and A. Al-Far, "Conceptual seismic analysis of multistory buildings tied retaining walls," in Proc. Jordan Royal Scientific Soc., June 2002, pp. 929-940.
16. K. Q. Wu and T. X. Yu, "Simple dynamic models of elastic-plastic structures under impact," Int. J. Impact Eng., vol. 25, pp. 737-754, 2001.
17. M. Dao, N. Chollakoop, K. J. Van Vliet, T. A. Venkatesh, and S. Suresh, "Computational modeling of the forward and reverse problems in instrumented sharp indentation," Acta. Mater., vol. 49, pp. 3899-3918, 2001.
18. Y. T. Cheng and C. M. Cheng, "Further analysis of indentation loading curves: Effects of tip founding on mechanical property measurements," Mater. Res., vol. 13, p. 1059, 1998.
19. D. Ma, K. Xu, and J. He, "Numerical simulation for determining the mechanical properties of thin metal films using depth-sensing indentation technique," Thin Solid Films, vol. 323, p. 183, 1998.
20. F. Frö]lich, P. Grau, and W. Grellmann, "Performance and analysis of recording microhardness tests," Phys. Stat. Sol., vol. A 42, pp. 79-89, 1977.
21. K. Zeng and C.-H. Chiu, "An analysis of load-penetration curves from instrumented indentation," Acta. Mater, vol. 49, pp. 3539-3551, 2001.
22. M. Sakai, "Energy principle of the indentation-induced inelastic surface deformation and hardness of brittle materials," Acta. Metall. Mater., vol. 41, no. 6, pp. 1751-1758, 1993.
23. N, A. Stilwell and D. Tabor, "Elastic recovery of conical indentations," Proc. Phys. Soc., vol. 78, pp. 169-179, 1961.
24. W. C. Oliver, "Alternative technique for analyzing instrumented indentation data," J. Mater. Res., vol. 16, pp. 3202-3206, 2001.
25. S. Suresh, A. E. Giannakopoulos, and J. Alkala, "Spherical indentation of compositionally graded materials: Theory and experiments," Acta. Mater., vol. 45, pp. 1307-1321, 1997.
26. A. E. Giannakopoulos, P. L. Larsson, and R. Vestergaard, "Analysis of Vickers indentation," Int. J. Solids Structures, vol. 31, pp. 2679-2708, 1994.
27. A. E. Giannakopoulos and S. Suresh, "Determination of elastoplastic properties by instrumented sharp indentation," Scripta Mater., vol. 40, pp. 1191-1198, 1999.
28. T. Scholz, G. A. Schneider, J. Munos-Saldana, and M. V. Swain, "Fracture taughness from submicron derived indentation cracks," Appl. Phys. Lett., vol. 84, pp. 3055-3057, 2004.
29. G. M. Pharr, "Measurements of mechanical properties by ultra low load indentation," Mater. Sci. Eng., vol. A253, pp. 151-159, 1998.