On the optimal damping of a vibrating shape memory alloy rod

Journal of Engineering Materials and Technology

Volumn 124, Issue 2, 2002, Pages 97-102

  Oberaigner, Eduard R ^a   Fischer, Franz D ^a   Tanaka, Kikuaki ^b  

^a INSTITUTE OF MECHANICS   (Austria)

^b TOKYO METROPOLITAN UNIVERSITY   (Japan)

Author keywords

[No Author keywords available]

Indexed keywords

APPROXIMATION THEORY; DAMPING; ELASTICITY; HEAT CONDUCTION; INTEGRAL EQUATIONS; INTELLIGENT STRUCTURES; MATHEMATICAL MODELS; MICROELECTROMECHANICAL DEVICES; PHASE TRANSITIONS; STRESS ANALYSIS; VIBRATIONS (MECHANICAL);

GOVERNING EQUATIONS; SMART SYSTEMS; STRESS-WAVE PHENOMENA; VIBRATION DAMPING;

SHAPE MEMORY EFFECT;

EID: 10844236474     PISSN: 00944289     EISSN: None     Source Type: Journal    
DOI: 10.1115/1.1310306     Document Type: Article

References (35)

1. George, P. E., Takashashi, S. Trolier-McKinstry, S., Uchino, K., and Wun-Fogle, M., 1995, "Materials for Smart Systems," MRS.
2. George, P. E., Gotthardt, R. Kazuhiro, O., Trolier-McKinstry and Wun-Fogle, M., 1997, "Materials for Smart Systems II", MRS.
3. Birman, V., 1997, "Review of Mechanics of Shape Sputter-Deposited Ti-Ni Thin Films," J. Phys. IV, Coll. 5-8, pp. 5-8, 677.
4. Skrobanck, K. D., Kohl, M., and Miyazaki, S., eds., 1996, "Stress-Optimized Shape Memory Microactuators," Proceedings of Third ICIM/ECSSM.
5. Miyazaki, S., et al., 1995, "Shape Memory Effects Associated with the Martensitic and R-Phase Transformations in Sputter-Deposited Ti-Ni Thin Films," J. Phys. IV, Coll. 5-8, pp. 677-682.
6. Miyazaki, S., 1996, "Development and Characterization of Shape Memory Alloys," Shape Memory Alloys, Fremond, M., and Miyazaki, S., eds., Springer-Verlag, Wien, New York, pp. 69-147.
7. Tanaka, K., 1986, "A Thermomechanical Sketch of Shape Memory Effect: One-dimensional Tensile Behavior," Res Mech., 18, pp. 251-263.
8. Tanaka, K., Kobayashi, S., and Sato, Y., 1986, "Thermomechanics of Transformation Pseudoelasticity and Shape Memory Effect in Alloys," Int. J. Plast., 2, pp. 59-72.
9. Fischer, F. D., Berveiller, M., Tanaka, K., and Oberaigner, E. R., 1994, "Continuum Mechanical Aspects of Phase Transformations in Solids," Arch. Appl. Mech., 64, pp. 54-85.
10. Fischer, F. D., Sun, Q. P., and Tanaka, K., 1996, "Transformation-Induced Plasticity," Appl. Mech. Rev., 49, pp. 317-364.
11. Tanaka, K., Nishimura, F., Tobushi, H., Oberaigner, E. R., and Fischer, F. D., 1995, "Thermomechanical Behavior of an Fe-based Shape Memory Alloy: Transformation Conditions and Hystereses," J. Phys. IV Coll. C8, p. 5, pp. 463-468.
12. Brinson, L. C., and Huang, M. S., 1996, "Simplifications and Comparisons of Shape Memory Alloy Constitutive Models," J. Intell. Mater. Syst. Struct., 7, pp. 108-114.
13. Liang, C., and Rogers, C. A., 1997a, "One Dimensional Thermomechanical Constitutive Relations for Shape Memory Materials," J. Intell. Mater. Syst. Struct., 8, pp. 285-302.
14. Liang, C., and Rogers, C. A., 1997b, "Design Of Shape Memory Alloy Actuators," J. Intell. Mater. Syst. Struct., 8, pp. 303-313.
15. Wu. K., Yang, E. Pu, Z., and Shi, J., 1996, "The Effect of Strain Rate on Detwinning and Superclastic Behavior of NiTi Shape Memory Alloys," J. Intell. Mater. Syst. Struct., 7, pp. 138-144.
16. Miyazaki, S., et al., 1981, "Lüders-like Deformation Observed in the Transformation Pseudoelasticity of a Ti-Vi Alloy," Scr. Metall., 15, pp. 853-856.
17. Shaw, J. A., and Kyriakides, S., 1995, "Thermomechanical Aspects of NiTi," J. Mech. Phys. Solids, 43, pp. 1243-1281.
18. Ancyaratne, A., and Knowles, J. K., 1993, "A Continuum Model of Thermoelastic Solids Capable of Undergoing Phase Transitions," J. Mech. Phys. Solids, 41, pp. 541-571.
19. Raniecki, B., and Tanaka, K., 1994, "On the Thermodynamic Driving Force for Coherent Phase Transformations," Int. J. Eng. Sci., 32, pp. 1845-1858.
20. Bruno, O. P., Leo, P. H., and Reitich, F., 1995, "Free Boundary Conditions at Austernite Martensite Interfaces," Phys. Rev. Lett., 74, pp. 746-749.
21. Zhong, S. G., and Batra, R. C., 1996, "Modeling of Macroscopic Response of Phase Transforming Materials under Quasi-Static Loading," J. Elast., 44, pp. 145-160.
22. Bekker, A., and Brinson, L. C., 1997, "Temperature-Induced Phase Transformation in a Shape Memory Alloy: Phase Diagram Based Kinetics Approach," J. Mech. Phys. Solids, 54, pp. 949-988.
23. Bhattacharyya, A., Lagoudas, D. C., Wang, Y., and Kinra, V. 1995, "On the Role of Thermoelectric Heat Transfer in the Design of SMA Activators: Theoretical Modeling and Experiment," Smart Mater. Struct., 4, pp. 252-263.
24. Oberaigner, E. R., Tanaka, K., and Fischer, F. D., 1996, "Investigation of the Damping Behavior of a Vibrating Shape Memory Alloy Rod using a Micromechanical Model," Smart Mater. Struct., 3, pp. 456-463.
25. Oberaigner, E. R., Tanaka, K., and Fischer, F. D., 1999, "Damping of a Vibrating SMA Rod through Phase Transformation," Proceedings IUTAM Symposium on "Variations of Domains and Free Boundary Problems," Argoul, P., et al., ed., Kluwer Academic, pp. 35-44.
26. Oberaigner, E. R., Fischer, F. D., and Tanaka, K., 1993, "A New Micromechanical Formulation of Martensite Kinetics Driven by Temperature and/or Stress," Arch. Appl. Mech., 63, pp. 522-533.
27. Oberaigner, E. R., Fischer, F. D., and Tanaka, K., 1994, "The Influence of Transformation Kinetics on Stress-Strain Relations of Shape Memory Alloys in Thermomechanical Processes," J. Intell. Mater. Syst. Struct., 5, pp. 474-486.
28. Butkovskiy, A. G., 1982, Green's Functions and Transfer Functions Handbook, Ellis Harwood Limited, Chichester.
29. Golberg, M. A., ed., 1990, Numerical Solution of Integral Equations, Plenum, New York.
30. Pipkin, A. C., 1991, A Course an Integral Equations, Springer-Verlag, New York.
31. Press, W. H., Flannery, B. P., Teukolsky, S. A., and Vetterling, W. T., 1986, Numerical Recipes, Cambridge University Press, Cambridge.
32. Pouchtchaenko, O. V., 2000, personal communication.
33. Belyaev, S. P., Volkov, A. E., and Voronkov, A. V., 1999, "Mechanical Oscillations in TiNi Under Synchronized Martensite Transformations," ASME J. Eng. Mater. Technol., 21, pp. 105-107.
34. Likhachev, V. A., and Pouchtchaenko, O. V., 1996, "Calculations for a Thermomechanical Coupling by the Methods of the Structure Analytical Theory," Tech. Phys., 41, pp. 1127-1131.
35. Banks, H. T., Smith, R. C., and Wang, Y., 1996, Smart Materials Structures: Modeling, Estimation and Control, Wiley, Chichester, pp. 225-238.