Tribological behavior of Stellite 21 modified with yttrium

Wear

Volumn 257, Issue 11, 2004, Pages 1154-1166

  Radu, Iulian ^a   Li, D Y ^a   Llewellyn, R ^b  

^a UNIVERSITY OF ALBERTA   (Canada)

^b NATIONAL RESEARCH COUNCIL CANADA   (Canada)

Author keywords

High temperature wear; Micro scratch; Nano indentation; Oxide; Stellite 21; Yttrium

Indexed keywords

COBALT ALLOYS; CORROSION; ENERGY DISPERSIVE SPECTROSCOPY; GAS TURBINES; MICROSTRUCTURE; OXIDATION; SCANNING ELECTRON MICROSCOPY; TRIBOLOGY; WEAR OF MATERIALS; X RAY DIFFRACTION ANALYSIS; YTTRIUM;

MICRO-MECHANICAL PROBES; SYNERGISTIC EFFECTS; TRIBOMETERS; WEAR BEHAVIOR;

STELLITE;

COBALT ALLOY; HIGH TEMPERATURE CORROSION; MICROSTRUCTURE; OXIDATION; STELLITE; TRIBOLOGY; YTTRIUM;

EID: 10844232373     PISSN: 00431648     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.wear.2004.07.013     Document Type: Article

References (58)

1. P. Crook, Cobalt, Cobalt alloys, in: ASM Metal Handbook, vol. 2, Materials Park, Ohio, 1993, pp. 446-456.
2. E. Lemarie, M. Le Calvar, Evidence of tribocorrosion wear in pressurized water reactors, Wear 249 (2001) 338-344.
3. ASM International, Nickel, Cobalt and Their Alloys, Materials Park, Ohio, 2000.
4. T.C. Sims, N.S. Stoloff, W.C. Hagel (Eds.), Superalloys II, Wiley, New York, 1987.
5. K.C. Antony, Wear-resistant cobalt base alloys, J. Metals 35 (1983) 52-60.
6. W.J. Huppmann, M.A. Clegg, The tribological behavior of polycrystalline cobalt as related to crystallographic texture and structure, ASLE Trans. 16 (1972) 107-114.
7. S. Atamert, H.K.D.H. Bhadeshia, Comparison of the microstructure and abrasive wear properties of Stellite hardfacing alloys deposited by arc welding and laser cladding, Metals Technol. 20 (1989) 1037-1054.
8. S.C. Agarwal, H. Ocken, The microstructure and galling wear of a laser-melted cobalt-base hardfacing alloy, Wear (1990) 140.
9. V. Otterloo, J. Hosson, Microstructural features and mechanical properties of a cobalt-based laser coating, Acta Mater. 45 (1997) 1225-1236.
10. J.N. Aoh, Y.R. Jeng, E.L. Chu, L.T. Wu, On the behavior of surface clad layers under high temperature, Wear 225-229 (1999) 1114-1122.
11. J.C. Shin, J.M. Doh, J.K. Yoon, D.Y. Lee, J.S. Kim, Effect of molybdenum on the microstructure and wear resistance of cobalt-base Stellite alloys, Surf. Coat. Technol. 166 (2003) 117-126.
12. J.S. Garcia, M.A. Medrano, A.S. Rodriguez, Formation of hep martensite during the isothermal aging of an fee Co-27Cr-5Mo-0.05C implant alloy, Metall. Mater. Trans. A 30 (1999) 1177-1184.
13. L. Remy, A. Pineau, Twinning and strain induced fee to hep transformation on the mechanical properties of Co-Ni-Cr-Mo alloys, Mater. Sci. Eng. 26 (1976) 123-132.
14. G. Bouquet, B. Dubois, Influence of the fee phase retained at room temperature on the mechanical properties of cobalt, Scripta Metall. 12 (1978) 1079-1081.
15. A. Halstead, R.D. Rawlings, Structure and hardness of Co-Mo-Cr-Si wear resistant alloy, Metal Sci. 18 (1984) 491-500.
16. P. Huang, H.F. Lopez, Strain induced ε-martensite in a Co-Cr-Mo alloy: grain size effects, Mater. Lett. 39 (1999) 244-248.
17. P. Huang, H.F. Lopez, Athermal ε-martensite in a Co-Cr-Mo alloy: grain size effects, Mater. Lett. 39 (1999) 249-253.
18. P. Huang, H.F. Lopez, Role of aging on the martensitic transformation in a cast cobalt alloy, Scripta Mater. 45 (2001) 427-433.
19. P. Crook, C.C. Li, The elevated temperature metal to metal wear behavior of selected hardfacing alloys, Wear Mater. (1983) 272-279.
20. K.J. Bhansali, A.E. Miller, Role of stacking fault energy on the galling and wear behavior of a cobalt base alloy, Wear Mater. (1981) 179-182.
21. H. Ocken, Reducing the cobalt inventory in light water reactors, Nucl. Technol. 68 (1984) 18-28.
22. A.J. Persson, S. Jacobson, S. Hogmark, Effect of temperature on friction and galling of laser processed Norem 02 and Stellite 21, Wear 255 (2003) 498-503.
23. J. Vikstrom, Galling resistance of hardfacing alloys replacing Stellite, Wear 143 (1994) 143-146.
24. S.H. Kang, Y.K. Shinoda, Y.K.H.S. Jeong, Thermal fatigue characterisitcs of PTA hard-faced steel, Surf. Eng. 17 (2001) 498-504.
25. V. Kuzuku, M. Ceylan, I. Aksoy, An investigation of Stellite 6 alloy containing 5wt.% Si, J. Mater. Process. Technol. 79 (1998) 47-51.
26. L. Wang, D.Y. Li, Effects of yttrium on microstructure, mechanical properties and high-temperature wear behavior of cast Stellite 6 alloy, Wear 255 (2003) 535-544.
27. V. Kuzuku, M. Ceylan, I. Aksoy, Phase investigation of a cobalt base alloy containing Cr, Ni, W and C, J. Mater. Process. Technol. 74 (1998) 137-141.
28. V. Kuzuku, M. Ceylan, I. Aksoy, Microstructure and Phase Analyses of Stellite 6 Plus 6 wt.% Mo Alloy, J. Mater. Process. Technol. 69 (1997) 257-263.
29. A. Osma, E.S. Kayali, M.L. Ovecoglu, The effect of elevated temperature and silicon addition on a cobalt-based wear resistant superlloy, J. Mater. Sci. 31 (1996) 4603-4608.
30. F.H. Stott, High-temperature sliding wear of metals, Tribol. Int. 35 (2002) 489-495.
31. F. Archard, W. Hirst, The wear of metals under unlubricated conditions, Proceedings of the Royal Society of London, A236, 1990, pp. 89-97.
32. F.H. Stott, J. Glascott, G.C. Wood, The sliding of wear commercial Fe-12%Cr alloys at high temperatures, Wear 101 (1985) 311-324.
33. F.H. Stott, J. Glascott, G.C. Wood, The Effectiveness of oxides in reducing sliding wear of alloys, Oxid. met. 24 (1985) 99-113.
34. F.H. Stott, The role of oxidation in the wear of alloys, Tribol. Int. 31 (1998) 61-71.
35. D.P. Whittle, J. Stringer, Improvement in properties: additives in oxidation resistance, Philos. Trans. R. Soc. London Ser. A 295 (1980) 309-329.
36. B. Pieraggi, R.A. Rapp, Interfacial scaling reactions and the reactive element effect, Mater. High Temp. 24 (1994) 229-234.
37. J. Jedlinski, General aspects of the reactive element effect, Corros. Sci. 35 (1993) 863-869.
38. J. Stringer, The reactive element effect in high-temperature corrosion, Mater. Sci. Eng. A 120 (1989) 129-137.
39. S. Chevalier, G. Bonnet, Effects of a reactive element on isothermal and cyclic oxidation of chromia forming alloys: SEM/EDX, TEM and SIMS investigations, Mater. High Temp. 17 (2000) 247-256.
40. L.V. Ramanathan, Role of the rare earth elements on high-temperature oxidation behavior of Fe-Cr, Ni-cr and Ni-Cr-Al alloys, Corros. Sci. 35 (1993) 871-878.
41. 3 formers, in: E. Lang (Ed.), The Role of Reactive Elements in Oxidation at High Temperatures, Prentice Hall, Ohio, USA, 1989, pp. 111-127.
42. K. Przybylski, G.J. Yurek, The reactive elements effect on high-temperature oxidation, Mater. Sci. Forum 43 (1989) 1-6.
43. 3 on the oxidation of Cr metals, Oxid. Met. 34 (1990) 173-200.
44. M.J. Bennett, A.T. Tuson, Improved high-temperature oxidation behavior of alloys by ion implantation, Mater. Sci. Eng. 116 (1989) 79-87.
45. P. Y. Hou, J. Stringer, The Effect of reactive element additions on the selective oxidation, growth and adhesion of chromia scales, Mater. Sci. Eng. 202 (1995) 1-10.
46. F.J. Perez, M.J. Cristobal, M.P. Hierro, F. Pedraza, G. Arnau, P. Merino, Effect of yttrium and erbium ion implantation on the oxidation behavior of the AISI 304 austenitic steel, Surf. Coat. Technol. 126 (2000) 116-122.
47. F.H. Stott, J. Glascott, G.C. Wood, The influence of alloying elements on the development and maintenance of protective scales, Oxid. Met. 44 (1995) 113-141.
48. T. Zhang, D.Y. Li, Effects of yttrium on sliding wear of 304 stainless steel in dilute sulphuric acid and air, Mater. Sci. Technol. 15 (1999) 1441-1446.
49. X. Wang, D.Y. Li, Beneficial effects of yttrium on the mechanical failure and chemical stability of the passive film of 304 stainless steel, Mater. Sci. Eng. A 315 (2001) 158-165.
50. X. Wang, D.Y. Li, Effects of yttrium on mechanical properties and chemical stability of passive film of alumide coating on 1045 steel, Surf. Coat. Technol. 160 (2002) 20-28.
51. M. Sage, C. Guillaud, Méthode d'analyse quantitative des variétés allotropiques du cobalt par les rayons X, Rev. Metall. 37 (1950) 139-145.
52. H. Berns, Micro-structural properties of wear resistant alloys, Wear 181-183 (1995) 271-279.
53. R. Liu, D.Y. Li, Y.S. Xie, R. Liewellyn, H.M. Hawthorne, Indentation behavior of pseudoelastic TiNi Alloy, Scripta Mater. 41 (1999) 691-699.
54. R.N. Taylor, R.B. Waterhouse, A study of the aging behavior of a cobalt based implant alloy, J. Mater. Sci. 18 (1983) 3265-3280.
55. P. Huang, H.F. Lopez, Effects of grain size on development of athermal and strain induced ε-martensite in a Co-Cr-Mo implant alloy, Mater. Sci. Technol. 15 (1999) 157-164.
56. F.H. Stoot, C.W. Stevenson, G.C. Wood, Friction and wear properties of Stellite 31 at temperatures from 293 to 1073K, Metals Technol. 4 (1977) 66-74.
57. S. Chevalier, C. Valot, G. Bonnet, J.C. Colson, J.P. Larpin, The reactive element effect on thermally grown chromia scale residual stress, Mater. Sci. Eng. A 343 (2003) 257-264.
58. M.F. Stroosnijder, J.D. Sunderkotter, M.J. Cristobal, H. Jenett, K. Isenbugel, M.A. Baker, Influence of yttrium ion implantation on the oxidation behavior of powder metallurgically produced chromium, Surf. Coat. Technol. 83 (1996) 205-211.