Effect of coriolis and centrifugal forces on turbulence and heat transfer at high rotation and buoyancy numbers in a rib-roughened internal cooling channel

Proceedings of the ASME Turbo Expo 2004

Volumn 3, Issue , 2004, Pages 11-21

  Sleiti, A K ^a   Kapat, J S ^a  

^a UNIVERSITY OF CENTRAL FLORIDA   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

BUOYANCY; COMPUTATIONAL FLUID DYNAMICS; COMPUTER SIMULATION; COOLING; HEAT TRANSFER; MASS TRANSFER; NUSSELT NUMBER; REYNOLDS NUMBER; ROTATION; STRESS ANALYSIS; TURBULENCE; VISCOSITY;

CENTRIFUGAL FORCES; CORIOLIS; DIFFERENTIAL STRESS MODEL (DSM); INTERNAL COOLING CHANNELS;

TURBOMACHINE BLADES;

EID: 10244237767     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1115/gt2004-53018     Document Type: Conference Paper

References (39)

1. Webb, R. L., Eckert, E. R. G., and Goldstein, J. 1971, "Heat transfer and friction in tubes with roughness." Int. J. Heat and Mass Transfer, 14, 601-617.
2. Han, J. C., and Glicksman, L. R. 1978, "Turbulent heat and mass transfer from a wall with parallel roughness ridges." Int. J. Heat and Mass Transfer, 21, 1143-1156.
3. Han, J. C., and Park, J. S. 1988, "Developing heat transfer in a rectangular channels with rib turbulators." Int. J. Heat and Mass Transfer, 183-195.
4. Han, J. C., Park J.S., and C.K., L. 1985, "Heat transfer enhancement in channels with promoters." J. Eng. Gas Turbines and Power, 107, 628-635.
5. Han, J. C., Zang, Y. M., and Lee, C. P. 1991, "Augmented heat transfer in square channels with parallel, crossed, and Vshaped angled ribs."J. Heat Transfer, 113, 590-596.
6. Han, J. C., and Zang, Y. M 1992, "Augmented heat transfer in square channels with parallel broken, and V-shaped ribs." J. Heat Transfer, 113, 590-596.
7. Taslim, M. E. 1999, "45-degree round-corner rib heat transfer coefficient measurements in a square channel." Journal of Turbomachinery, 121, 1-9.
8. Taslim, M. E., Li, T., and Spring, S. D. 1998, "Measurements of Heat Transfer Coefficients and Friction Factors in Passages Rib-Roughened in all walls." ASME J. of Turbomachinery, 120, 256-570.
9. Taslim, M. E., and Korotky, G. J. 1998, "Low-Aspect Ratio Rib Heat Transfer Coefficient Measurements in Square Channel." ASME J. of Turbomachinery, 120, 831-838.
10. Taslim, M. E., and Lengkong. 1998, "45 deg. Staggered Rib Heat Transfer Coefficient Measurements in a Square Channel." ASME J. of Turbomachinery, 120, 571-580.
11. Taslim, M. E. 2000, "Aero-thermal performance of internal cooling systems in turbomachines." VKI Lecture Series 2000-03.
12. Rothe, P. H., and Johnson, J. P. 1979, "Free Shear Layer Behavior in Rotating Systems." ASME Journal of Fluids Engineering, 101, 117-120.
13. Wagner, J. H., Johnson, B. V., Graziani, R. A., and Yen, F. C. 1992, "Heat Transfer in Rotating Serpentine Passages With Trips Normal to the Flow." ASME J. Turbomach., 114, 847-857.
14. Iacovides, H., Jackson, D. C., Ji, H., Kelemenis, C., Launder, B. E., and Nikas, K. 1998, "LDA Study of the Flow Developement Through Orthogonally Rotating U-Bend of Strong Curvature and Rib Roughened Walls." ASME J. of Turbomachinery, 120, 386-391.
15. Liou, T. M., Cheng, M.-Y., and Tsai, M.-H. 2002, "Fluid Flow and Heat Transfer in a Rotating Two-Pass Squre Duct With In-Line 90-deg Ribs." Journal of Turbomachinery, 124, 260-268.
16. Johnson, B. V., Wagner, J. H., Stuber, G. D., and Yeh, F. C. 1994, "Heat transfer in rotating serpentine passages with trips skewed to the flow." Journal of Turbomachinery, 116, 113-123.
17. Rathjen, L., Hennecke O.K., Sivade, C., and Semmler, K., 2002, "Detailed Experimental and Numerical Heat/Mass Transfer Investigations in a Rotating Two-Pass Coolant Channel with Staggered 45 deg Ribs."
18. Dunn, M. G. 2001, "Convective Heat transfer and Aerodynamics in Axial Flow Turbines." Journal of Turbomachinery, 123(October), 637-686.
19. Han. J. C., Dutta, S., and Srinath, E. 2000, Gas Turbine Heat Transfer and Cooling Technology, Taylor & Francis, New York.
20. Shih, T. I.-P., and Sultanian, B. 2001, Computations of Internal and Film Cooling, WIT Press, Ashurst, Aouthhampton.
21. Rigby, D. L. 1998, "Prediction of Heat and Mass Transfer in a Rotating Ribbed Coolant Passage With a 180 Degree Turn." ASME Paper No. 98-GT-329.
22. Park, C. W., Lau, S. C., and Kukreja, R. T. 1997, "Heat/Mass Transfer in a Rotating Two-Pass Square Channel with Transverse Ribs." J. Thermophys. Heat Transfer, 11, 8-16.
23. Prakash, C., and Zerkle, R. 1995, "Prediction of Turbulent Flow and Heat Transfer in a Ribbed Rectangular duct with and without Rotation." ASME J. of Turbomachinery, 117, 255-261.
24. lacovides, H, 1997, "The Computation of Turbulent Flow Through Stationary and Rotating U-Bends with RibRoughened Surfaces." 10th International Conference on Numerical Methods in Laminar and Turbulent Flows, Swansea.
25. Iacovides, H., and Raisee, M. 1999, "Recent progress in the computation of flow and heat transfer in internal cooling passages of turbine blades." Int. J. Heat and Fluid Flow, 20, 320-328.
26. Bonhoff, B., Tomm, U., Johnson, B., and Jennions, I., 1997, "Heat transfer predictions for rotating u-shaped coolant channels with skewed ribs and with smooth walls." Int. Gas Turbine & Aero-engine Congress and Exhibition.
27. Wagner, J. H., Johnson, B. V., and Hajek, T. 1991, "Heat Transfer in Rotating Passages With Smooth Walls and Radial Outward Flow." ASME J. Turbomach., 113, 42-51.
28. Murata, A., and Mochizuki, S. 2001, "Effect of centrifugal buoyancy on turbulent heat transfer in an orthogonally rotating square duct with transverse or angled rib turbulators." International Journal of Heat and Mass Transfer, 44, 2739-2750.
29. Jang, Y.-J., Chen, H-C., and Han, J.-C. 2001, "Flow and Heat Transfer in a Rotating Square Channel With 45 deg Angled Ribs by Reynolds Stress Turbulence Model." Journal of Turbomachinery, 123, 124-132.
30. Sleiti, A. K., and Kapat, J. S., 2004, "Effect of Coriolis and Centrifugal Forces on Turbulence and Transport at High Rotation and Buoyancy Numbers in Smooth Internal Cooling Channels." 42nd AIAA Aerospace Sciences Meeting and Exhibit, Reno, Nevada.
31. Sleiti, A. K., and Kapat, J. S., 2004, "Fluid Flow and Heat Transfer in Rotating Curved Duct at High Rotation and Buoyancy Numbers." ASME Turbo Expo 2004, Vienna, Austria.
32. Gibson, M. M., and Launder, B. E. 1978, "Ground Effects on Pressure Fluctuations in the Atmospheric Boundary Layer." journal of Fluid Mechanics, 86, 491-511.
33. Launder, B. E. 1989, "Second-moment closure: present and future?" Int. J. Heat and Fluid Flow, 10, 282-300.
34. Launder, B. E., Reece, G. J. and Rodi, W. 1975, "Progress in the Development of a Reynolds-Stress Turbulence Closure." Journal of Fluid Mechanics, 68(3), 537-566.
35. Fu, S., Launder, B. E., and Leschziner, M. A., 1987, "Modeling Strongly Swirling Recirculating Jet Flow with ReynoldsStress Transport Closures." Sixth Symposium on Turbulent Shear Flows, Toulouse, France.
36. Daly, B. J., and Harlow, F. H. 1970, "Transport Equations in Turbulence." Physics of Fluids, 13, 2634-2649.
37. The FLUENT User's Guide, Version 6.2.
38. Kays, W. M., Crawford, M.E. 1993, Convective Heat and Mass Transfer, McGraw-Hill.
39. Liou, T. M., Wu, Y. Y., and Y., C. 1993, "LDV-measuremnets of periodic fully developed main and secondary flows in a channel with rib-disturbed walls." Journal of Fluids Engineering, 115, 109-114.