Fluid flow and heat transfer in rotating curved duct at high rotation and density rations

Proceedings of the ASME Turbo Expo 2004

Volumn 3, Issue , 2004, Pages 33-43

  Sleiti, A K ^a   Kapat, J S ^a  

^a UNIVERSITY OF CENTRAL FLORIDA   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

CORIOLIS; CURVATURE EFFECTS; INTERNAL COOLING; VISCOUS EFFECTS;

BOUNDARY LAYERS; BUOYANCY; COMPRESSORS; COMPUTATIONAL FLUID DYNAMICS; COMPUTER SIMULATION; COOLING; GAS TURBINES; HEAT TRANSFER; PRESSURE EFFECTS; REYNOLDS NUMBER; ROTATION; STRESS ANALYSIS; THERMAL EFFECTS; TURBULENCE; VISCOSITY;

FLOW OF FLUIDS;

EID: 10244224106     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: None     Document Type: Conference Paper

References (43)

1. Dean, W. R, 1927, "Note on the motion of fluid in a curved pipe." Philos. Mag., 4, 4208-4223.
2. Wagner, J. H., Johnson, B. V., and Hajek, T. 1991, "Heat Transfer in Rotating Passages With Smooth Walls and Radial Outward Flow." ASME J. Turbomach., 113, 4251.
3. Wagner, J. H., Johnson, B. V., and Kopper, F. C. 1991, "Heat Transfer in Rotating Serpentine Passages With Smooth Walls." ASME J. Turbomach., 113, 321-330.
4. Johnson, B. V., Wagner, J. H., Stuber, G D., and Yeh, F. C. 1994, "Heat transfer in rotating serpentine passages with trips skewed to the flow." Journal of Turbomachinery, 116, 113-123.
5. Mochizuki, S., Takamura, J., Yamawaki, S., and Yang, W.J. 1994, "Heat transfer in serpentine flow passages with rotation." Journal of Turbomachinery, 116, 133-140.
6. Shih, T.-S., Liou, W. W., Shabbir, A., Yang, Z., and Zhu, J. 1995, "A new k-ε eddy viscosity model for high Reynolds number turbulent flows." Computers Fluids, 24, 227-238.
7. Cheah, S. C., lacovides, H., Jackson, D. C., Ji, H., and Launder, B. E. 1996, "LDA investigation of the flow development through rotating U-duct." J. Turbomachinery, 118, 590-596.
8. Hwang, G J., and Kuo, C. R. 1997, "Experimental studies and correlations of convective heat transfer in a radially rotating serpentine passage." Journal of Heat Transfer, 119, 460-466.
9. lacovides, H., Jackson, D. C., Kelemenis, G, Launder, B. E., and Yuan, Y. M. 1999, "Experiments on local heat transfer in rotating square-ended U-bend." Int. J. Heat and Fluid Flaw, 20, 302-310.
10. Liou, T. M., and Chen, C.-C. 1999, "LDV study of developing flows through a smooth duct with a 180 deg straight-corner turn." Journal of Turbomachinery, 121, 167-174.
11. Liou, T. M., Cheng, M.-Y, and Tsai, M.-H. 2002, "Fluid Flow and Heat Transfer in a Rotating Two-Pass Squre Duct With In-Line 90-deg Ribs." Journal of Turbomachinery, 124, 260-268.
12. Taslim, M. E. 1999, "45-degree round-corner rib heat transfer coefficient measurements in a square channel." Journal of Turbomachinery, 121, 1-9.
13. Taslim, M. E., Li, T., and Spring, S. D. 1998, "Measurements of Heat Transfer Coefficients and Friction Factors in Passages Rib-Roughened in all walls." ASME J. of Turbomachinery, 120, 256-570.
14. Taslim, M. E., and Korotky, G J. 1998, "Low-Aspect Ratio Rib Heat Transfer Coefficient Measurements in Square Channel." ASME J. of Turbomachinery, 120, 831-838.
15. Taslim, M. E., and Lengkong. 1998, "45 deg. Staggered Rib Heat Transfer Coefficient Measurements in a Square Channel." ASME J. of Turbomachinery, 120, 571-580.
16. Taslim, M. E. 2000, "Aero-thermal performance of internal cooling systems in turbomachines." VKI Lecture Series 2000-03.
17. Prandtl, L. 1929, "Report." NACA TM-625.
18. Bradshaw, P. 1969, "The analogy between streamline curvature and buoyancy in turbulent shear flow." J. Fluid Mechanics, 36, 177-191.
19. Launder, B. E., Priddin, C. H., and Sarma, B. I. 1977, "The calculation of turbulent boundary layers on spining and curved surfaces." J. of Fluids Engineering, 99, 231-239.
20. Wilcox, D. C., and Chambers, T. L. 1993, "Streamline curvature effects on turbulent boundary layers." AIAA Journal, 15, 574-580.
21. Launder, B. E. 1989, "Second-moment closure: present and future?" Int. J. Heat and Fluid Flow, 10, 282-300.
22. Bredberg, J. 2002, "Turbulence Modelling for Internal Cooling of Gas-Turbine Blades," PhD thesis, Dept. of Thermo and Fluid Dynamics, Chalmers University of Technology, Göteborg.
23. Hellsten, A., 1998, "Some improvements in Menters komega SST turblence model." 29th AIAA Fluid Dynamics Conference, AIAA 98-2554.
24. Lin, Y.-L., Shih, T. I.-P., Stephens, M. A., and Chyu, M. K. 2001, "A Numerical Study of Flow and Heat Transfer in a Smooth and a Ribbed U-Duct with and without Rotation." ASME J. of Heat Transfer, 219-232.
25. Luo, J., and Lakshminarayana, B. 1997, "Analysis of streamline curvature effects on wall-bounded turbulent flows." AIAA Journal, 35, 1273-1279.
26. Luo, J., and Lakshminarayana, B. 1997, "Prediction of Strongly Curved Turbulent Duct Flows with Reynolds Stress Model." AIAA Journal, 35, 91-98.
27. Rumsey, C. L., Gatski, T. B., and Morrison, J. H. 2000, "Turbulence model Predictions of Strongly Curved Flow in a U-Duct." AIAA Journal, 38 (8), 1394-1402.
28. Zhang, J., Zhang, B., and Ju, J. 2001, "Fluid flow in a rotating curved rectangular duct." Int. J. Heat and Fluid Flow, 22, 583-592.
29. Besserman, D. L., and Tanrikut, S. 1991, "Comparison of heat transfer measurements with computations for turbulent flow around a 180 degree bend." Paper 91GT-2, ASME.
30. Choi, Y. D., lacovides, H., and Launder, B. E. 1989, "Numerical computation of turbulent flow in a squaresectioned 180 deg bend." Journal of Fluid Engineering, 111, 59-68.
31. lacovides, H., Launder, B. E., and Li, H.-Y. 1996, "Application of a reflection-free DSM to turbulent flow and heat transfer in square-sectioned U-bend." Experimental Thermal and Fluid Science, 13, 419-429.
32. lacovides, H., Launder, B. E., and Li, H.-Y. 1996, "The computation of flow development through stationary and rotating U-duct of strong curvature." Int. J. Heat and Fluid Flow, 17, 22-33.
33. Nikas, K.-S., and lacovides, H., 2001, "The computation of flow and heat transfer through square-ended Ubends, using low-Reynolds number models." 2:nd Int. Symp. on Turbulent Shear Flows Phenomena, Stockhohn, 229-234.
34. Bredberg, J. 2002, "Turbulence Modelling for Internal Cooling of Gas-Turbine Blades," Chalmers University of Technology, Göteborg.
35. Rigby, D. L., Steinthorsson, E., and Ameri, A. 1996, "Internal Passage Heat Transfer Prediction Using Multiblock Grids and k-o Turbulence Model." ASME Paper No. 97-GT-431.
36. Bonhoff, B., Tomm, U., Johnson, B. V., and Jennions, I. 1997, "Heat transfer predictions for rotating U-shaped coolant channels with skewed ribs and with smooth walls." Paper 97-GT-162, ASME.
37. Chen, H. C., Jang, Y. J., and Han, J. C. 2000, "Computation of heat transfer in rotating two-pass square channels by a second-moment closure model." International Journal of Heat and Mass Transfer, 43, 1603-1616.
38. Sleiti, A. K., and Kapat, J. S., 2004, "Effect of Coriolis and Centrifugal Forces on Turbulence and Transport at High Rotation and Buoyancy Numbers in Smooth Internal Cooling Channels." 42nd AIAA Aerospace Sciences Meeting and Exhibit, Reno, Nevada.
39. Gibson, M. M., and Launder, B. E. 1978, "Ground Effects on Pressure Fluctuations in the Atmospheric Boundary Layer." journal of Fluid Mechanics, 86, 491-511.
40. Launder, B. E., Reece, G J. and Rodi, W. 1975, "Progress in the Development of a Reynolds-Stress Turbulence Closure." Journal of Fluid Mechanics, 68(3), 537-566.
41. The FLUENT User's Guide, Version 6.2.
42. Kays, W. M., Crawford, M.E. 1993, Convective Heat and Mass Transfer. McGraw-Hill.
43. Bonhoff, B., Schneider, T., Johnson, B., and Jennions, L, 1997, "Prediction for turbulent flow in rotating and non rotating coolant channels." 2:nd Int. Symp. On Turbulence, Heat and Mass Transfer,