LDV study of developing flows through a smooth duct with a 180deg straight-corner turn

Journal of Turbomachinery

Volumn 121, Issue 1, 1999, Pages 167-174

  Liou, T M ^a   Chen, C C ^a  

^a NATIONAL TSING HUA UNIVERSITY   (Taiwan)

Author keywords

[No Author keywords available]

Indexed keywords

ASPECT RATIO; BUBBLE FORMATION; COOLING; DUCTS; FLOW MEASUREMENT; HEAT TRANSFER; LASER DOPPLER VELOCIMETERS; REYNOLDS NUMBER; TURBULENT FLOW; VORTEX FLOW;

DEAN VORTICES; NONUNIFORM FLOW; SEPARATED FLOW;

TURBOMACHINE BLADES;

COOLING; DUCT; LASER DOPPLER VELOCIMETER; TURBINE;

EID: 0033012759     PISSN: 0889504X     EISSN: 15288900     Source Type: Journal    
DOI: 10.1115/1.2841228     Document Type: Article

References (27)

1. Azzola, J., Humphrey, J. A. C., Iacovides, H., and Launder, B. E., 1986, ‘'Developing Turbulent Flow in a U-Bend of Circular Cross-Section: Measurement and Computation,” ASME Journal of Fluids Engineering, Vol. 108, pp. 214- 221.
2. Chang, S. M., Humphrey, J. A. C., and Modavi, A., 1983, “Turbulent Flow in a Strongly Curved U-Bend and Downstream Tangent of Square Cross-Sections,” Physico Chemical Hydrodynamics, Vol. 4, No. 3, pp. 243-269.
3. Cheah, S. C., iacovides, H„ Jackson, D. C., Ji, H., and Launder, B. E., 1996, “LDA Investigation of the Flow Development Through Rotating U-Ducts,” ASME Journal of Turbomachinery, Vol. 118, pp. 590-596.
4. Cheng, K. C., Nakayama, J., and Akiyama, M., 1977, “Effect of Finite and Infinite Aspect Ratios on Flow Patterns in Curved Rectangular Channels,” Proc. International Symposium on Flow Visualization, Oct., Tokyo, Japan, pp. 640-645.
5. Cheng, K. C., Shi, L., Kurokawa, M., and Chyu, M. K., 1992, “Visualization of Flow Patterns in a 180 Deg Sharp Turn of a Square Duct,” Proc. Fourth International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, Honolulu, HI, Apr.
6. Choi, Y. D., Iacovides, H., and Launder, B. E., 1989, “Numerical Computation of Turbulent Flow in a Square-Sectioned 180 Deg Bend,” ASME Journal of Fluids Engineering, Vol. 111, pp. 59-68.
7. Chyu, M. K., 1991, “Regional Heat Transfer in Two-Pass and Three-Pass Passages With 180 Deg Sharp Turns,” ASME Journal of Heat Transfer, Vol. 113, pp. 63-70.
8. Drain, L. E., 1980, The Laser-Doppler Technique, Wiley, New York, pp. 136-145.
9. Eaton, J. K., and Johnston, J. P., 1981, “A Review of Research on Subsonic Turbulent Flow Reattachment,” AIAA Journal, Vol. 19, pp. 1093-1100.
10. Fairbank, J. A., and So, R. M. C., 1987, “Upstream and Downstream Influence of Pipe Curvature on the Flow Through a Bend,” International Journal of Heat and Fluid Flow, pp. 211-217.
11. Han, J. C., and Zhang, Y. M., 1992, “Effect of Uneven Wall Temperature on local Heat Transfer in a Rotating Square Channel With Smooth Walls and Radial Outward Flow,” ASME Journal of Heat Transfer, Vol. 114, pp. 850-858.
12. Hille, P., Vehrenkamp, R., and Shulz-Dubois, E. O., 1985, “The Development and Structure of Primary and Secondary Flow in a Curved Square Duct,” Journal of Fluid Mechanics, Vol. 151, pp. 219-241.
13. Johnson, R. W., 1988, “Numerical Simulation of Local Nusselt Number for Turbulent Flow in a Square Duct With a 180 Deg Bend,” Numerical Heat Transfer, No. 1, 13, pp. 205-228.
14. Kwak, D., Chang, J. L, C., Shanks, S. P., and Chakravarthy, S. R., 1986, “A Three-Dimensional Incompressible Navier-Stokes Flow Solver Using Primitive Variables,” AIAA Journal, Vol. 24, No. 3, pp. 390-396.
15. Liou, T. M., Chang, Y., and Hwang, D. W., 1990, “Experimental and Computational Study of Turbulent Flows in a Channel With Two Pairs of Turbulence Promoters in Tandem,” ASME Journal of Fluids Engineering, Vol. 112, pp. 302-310.
16. Liou, T. M., Wu, Y. Y., and Chang, Y., 1993, “LDV Measurements of Periodic Fully Developed Main and Secondary Flows in a Channel With Rib-Disturbed Walls,” ASME Journal of Fluids Engineering, Vol. 115, pp. 109-114.
17. Liou, T. M., and Liao, C. C., 1995, “Flows in Curved Combustor Inlet With and Without a Guide Vane,” AIAA Journal of Propulsion and Power, Vol. 11, No. 3, pp. 464-472.
18. Mclaughlin, D. K., and Tiederman, W. G., 1973, “Biasing Correlation for Individual Realization of Laser Anemometer Measurement in Turbulent Flows,” The Physics of Fluids, Vol. 16, No. 12, pp. 2082-2088.
19. Metzger, D. E., Plevich, C. W., and Fan, C. S., 1984, “Pressure Loss Through Sharp 180 Deg Turns in Smooth Rectangular Channels,” ASME Journal of Engineering for Gas Turbines and Power, Vol. 106, pp. 677-681.
20. Metzger, D.E., and Sahm, M. K., 1986, “Heat Transfer Around Sharp 180 Deg Turns in Smooth Rectangular Channels,” ASME Journal of Heat Transfer, Vol. 108, pp. 500-506.
21. Rigby, D. L., Ameri, A.A., and Steinthorsson, E., 1996, “Internal Passage Heat Transfer Prediction Using Multiblock Grids and a k-w Turbulence Model,” ASME Paper No. 96-GT-188.
22. Sathyamurthy, P.S., Karki, K. C., and Patankar, S.V., 1994, “Prediction of Turbulent Flow and Heat Transfer in a Rotating Square Duct With a 180 Deg Bend,” ASME Paper No. 94-GT-197.
23. Tekriwal, P., 1994, “Heat Transfer Prediction in Rotating Radial Smooth Channel: Comparative Study of k-e Models With Wall Function and Low-Re Model,” ASME Paper No. 94-GT-196.
24. Wagner, J. H., Johnson, B. V., and Hajek, T. J., 1991a, “Heat Transfer in Rotating Serpentine Passages With Smooth Walls,” ASME Journal of Turbomachinery, Vol. 113, pp. 321-330.
25. Wagner, J. H., Johnson, B. V., and Kopper, F. C., 1991b, “Heat Transfer in Rotating Passages With Smooth Walls and Radial Outward Flow,” ASME Journal of Turbomachinery, Vol. 113, pp. 42-51.
26. Wang, T. S., and Chyu, M. K., 1994, “Heat Convection in a 180 Deg Turning Duct With Different Turn Configurations,” Journal of Thermophysics and Heat Transfer, Vol. 8, No. 3.
27. Yang, W. J., Zhang, N., and Chiou, J., 1992, “Local Heat Transfer in a Rotating Serpentine Flows Passage,” ASME Journal of Heat Transfer, Vol. 114, pp. 354-361.