Geometric element analysis of fretting in a model of a modular femoral component of a hip implant

Bio-Medical Materials and Engineering

Volumn 14, Issue 1, 2004, Pages 43-51

  Lewis, Gladius ^a  

^a University of Memphis   (United States)

Author keywords

Fretting; Geometric element modeling and analysis; Hip implant

Indexed keywords

HIP PROSTHESES; IMPLANTS (SURGICAL); MATERIALS SCIENCE; MATHEMATICAL MODELS; NUMERICAL ANALYSIS;

HEAD-NECK CONNECTION; HIP IMPLANTS;

BIOMEDICAL ENGINEERING;

ANALYTIC METHOD; ARTICLE; ELASTICITY; FEMUR; FEMUR HEAD; FEMUR NECK; GEOMETRIC ELEMENT ANALYSIS; HIP PROSTHESIS; IMPLANT; PHYSICAL MODEL; PRIORITY JOURNAL; YOUNG MODULUS;

COMPUTER SIMULATION; COMPUTER-AIDED DESIGN; ELASTICITY; EQUIPMENT FAILURE ANALYSIS; FEMUR; FINITE ELEMENT ANALYSIS; FRICTION; HIP JOINT; HIP PROSTHESIS; HUMANS; MATERIALS TESTING; MODELS, BIOLOGICAL; MOTION; PROSTHESIS DESIGN; PROSTHESIS FAILURE; SURFACE PROPERTIES;

EID: 0842311797     PISSN: 09592989     EISSN: None     Source Type: Journal    
DOI: None     Document Type: Article

References (27)

1. Various authors, Modularity in primary total hip arthroplasty, J. Arthroplasty 11 (1996), 332-338.
2. W.J. Hozack, Head-neck modularity for total hip arthroplasty: is it necessary?, J. Arthroplasty 11 (1996), 397-399.
3. M.J. Chmell, D. Rispler and R. Poss, The impact of modularity in total hip arthroplasty, Clin. Orthop. Rel. Res. 319 (1995), 77-84.
4. D.E. Marlowe, J.E. Parr and M.B. Mayor, eds, Modularity of Orthopedic Implants, ASTM STP 1301, American Society for Testing and Materials International, West Conshohocken, PA, USA, 1997.
5. S.T. Woolson and G.T. Pottorff, Disassembly of a modular femoral prosthesis after dislocation of the femoral component: a case report, J. Bone Joint Surg. 72-A (1990), 624-625.
6. R.M. Urban, J.J. Jacobs, J.L. Gilbert, S.B. Rice, M. Jasty, C.R. Bragdon and J.O. Galante, Characterization of solid products of corrosion generated by modular head-neck femoral stems of different designs and materials, in: Modularity of Orthopedic Implants, ASTM STP 1301, D.E. Marlowe, J.E. Parr and M.B. Mayor, eds, American Society for Testing and Materials International, West Conshohocken, PA, USA, 1997, pp. 33-44.
7. O. Svennson, E.B. Mathiesen, F.P. Reinholt and G.A. Blomgren, Formation of a fulminant soft tissue pseudotumor after uncemented hip arthroplasty, J. Bone Joint Surg. 70-A (1988), 1238-1242.
8. W.H. Harris, The problem is osteolysis, Clin. Orthop. Rel. Res. 311 (1995), 46-53.
9. J.L. Gilbert, J.J. Jacobs, C.A. Buckley, K.C. Bertin and M. Zernich, Intergrannular corrosion fatigue of Co-Cr femoral stems: a failure analysis of two implants, J. Bone Joint Surg. 76-A (1994), 110-115.
10. B.S. Bal, D. Vandelune, D.M. Gurba, M. Jasty and W.H. Harris, Comparison of polyethylene wear rates between two femoral stems of similar geometry, but different metal, different porous layer, and different modularity, in: Transactions of the 42nd Annual Meeting of the Orthopaedic Research Society, Atlanta, GA, USA, February 19-22, 1996.
11. A. Samuel and D. Horrigan, Engineering design with a " user-fluent" finite element package: MECHANICA/Applied Structure, J. Eng. Design 6 1995), 57-68.
12. R. Toogood, Pro/MECHANICA Structural Tutorial Release 18/19: A Click-by-Click Primer, Schroff Development Corporation, Shawnee Mission, Kansas, 1998.
13. K. Mann and J. Hertzler, Crack growth rate in cemented total hip replacement does not depend on cement mantle thickness, in: Transactions of the 47th Annual Meeting of the Orthopaedic Research Society, San Francisco, CA, USA, February 25-28, 2001, p. 0181.
14. M. Viceconti, L. Critofolini, M. Baleani and A. Toni, Pre-clinical validation of a partially cemented femoral prosthesis by synergistic use of numerical and experimental methods, J. Biomech. 34 (2001), 723-731.
15. J. Stolk, N. Verdonschot and R. Huiskes, Hip-joint and abductor-muscle forces adequately represent in vivo loading of a cemented total hip replacement, J. Biomech. 34 (2001), 917-926.
16. R.A. Poggie, S. Nasser and S.M. Kulkarni, Stress and strain analysis of modular hip tapers, in: Transactions of the 44th Annual Meeting of the Orthopaedic Research Society, New Orleans, LA, USA, March 16-19, 1998, p. 415.
17. R.M. Gillies, J.P. Hyvarinen, T.J. Letters and B. Ben-Nissan, The effect of taper angular mismatch on the prosthetic femoral head, in: Transactions of the 25th Annual Meeting of the Society for Biomaterials, Providence, RI, USA, April 28-May 2, 1999, p. 599.
18. S.J.G. Taylor and P.S. Walker, Forces and moments telemetered from two distal femoral replacements during various activities, J. Biomech. 34 (2001), 839-848.
19. K. Hirakawa, T.W. Bauer, Y. Hashimoto, B.N. Stulberg and A.H. Wilde, Influence of femoral head size on physical properties of acetabular wear debris, in: Transactions of the 42nd Annual Meeting of the Orthopaedic Research Society, Atlanta, GA, USA, February 19-22, 1996, p. 455.
20. K.S. Keisu, E.B. Mathiesen and J.U. Lindgren, The uncemented fully textured Lord hip prosthesis: a 10- to 15-year followup study. Clin. Orthop. Rel. Res. 382 (2001), 133-142.
21. R. Venugopalan, T.E. Justice, L.C. Lucas and J.E. Lemons, Origins of accelerated corrosion in modular hip prostheses: in vitro and in vivo analysis, in: Transactions of the 44th Annual Meeting of the Orthopaedic Research Society, New Orleans, LA, USA, March 16-19, 1998, p. 823.
22. T.P. Schmalzried, D.L. Scott, C.A. Zahiri, D.F. Dorey, W.M. Sanford, L. Kem and W. Humphrey, Variables affecting wear in vivo: analysis of 1,080 hips with computer-assisted technique, in: Transactions of the 44th Annual Meeting of the Orthopaedic Research Society, New Orleans, LA, USA, March 16-19, 1998, p. 275-245.
23. A.P.D. Elfick, R.M. Hall, I.M. Pinder and A. Unsworth, Wear in retrieved acetabular components: effect of femoral head radius and patient parameter, J. Arthroplasty 13 (1998), 291-295.
24. United States Public Health Service, National Institutes of Health (NIH) Consensus Statement: Total Hip Replacement Vol. 12, 1994, pp. 1-31.
25. A.A. Edidin and S.M. Kurtz, The evolution of paradigms for wear in total joint arthroplasty: the role of design, material, and mechanics, www.uhmwpe.org, October 18, 2000.
26. M. Menzi, Greater freedom of movement thanks to a large ball head, Sulzer Technical Review 4 (2000), 24-26.
27. P.E. Beaule, T.P. Schmalzried, P. Udokiat and H.C. Amstutz, Jumbo femoral head for the treatment of recurrent dislocation following total hip replacement, J. Bone Joint Surg. 84-A (2002), 256-263.