Three-body wear of dental resin composites reinforced with silica-fused whiskers

Dental Materials

Volumn 20, Issue 3, 2004, Pages 220-227

  Xu, Hockin H K ^a   Quinn, Janet B ^a   Giuseppetti, Anthony A ^a   Eichmiller, Frederick C ^a   Parry, Edward E ^a   Schumacher, Gary E ^a  

^a NATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY   (United States)

Author keywords

Dental resin composite; Mechanisms; Reinforcement; Silica fusion; Three body; Wear; Whiskers

Indexed keywords

BRITTLE FRACTURE; CRYSTAL WHISKERS; CURING; FILLERS; FUSED SILICA; GLASS; POLYMERIZATION; POLYMETHYL METHACRYLATES; REINFORCEMENT; RESINS; SILICON NITRIDE; TOUGHNESS; WEAR OF MATERIALS; WEAR RESISTANCE;

DENTAL RESIN COMPOSITES; MASS FRACTIONS; SILICA FUSION; THREE-BODY; WEAR CYCLES;

DENTAL COMPOSITES;

INORGANIC COMPOUND; RESIN; SILICON DERIVATIVE; SILICON DIOXIDE; SILICON NITRIDE;

ANALYSIS OF VARIANCE; ARTICLE; CHEMISTRY; COMPARATIVE STUDY; DENTAL SURGERY; MATERIALS TESTING; NONPARAMETRIC TEST; SCANNING ELECTRON MICROSCOPY; SURFACE PROPERTY;

ANALYSIS OF VARIANCE; CARBON COMPOUNDS, INORGANIC; COMPOSITE RESINS; DENTAL RESTORATION WEAR; MATERIALS TESTING; MICROSCOPY, ELECTRON, SCANNING; SILICON COMPOUNDS; SILICON DIOXIDE; STATISTICS, NONPARAMETRIC; SURFACE PROPERTIES;

EID: 0842265001     PISSN: 01095641     EISSN: None     Source Type: Journal    
DOI: 10.1016/S0109-5641(03)00096-4     Document Type: Article

References (40)

1. Bowen R.L. Properties of a silica-reinforced polymer for dental restorations. J Am Dent Assoc. 66:1963;57-64.
2. Ferracane J.L., Condon J.R. Post-cure heat treatments for composites: properties and fractography. Dent Mater. 8:1992;290-295.
3. Ferracane J.L., Berge H.X., Condon J.R. In vitro aging of dental composites in water - effect of degree of conversion, filler volume, and filler/matrix coupling. J Biomed Mater Res. 42:1998;465-472.
4. Loza-Herrero M.A., Rueggeberg F.A., Caughman W.F., Schuster G.S., Lefebvre C.A., Gardner F.M. Effect of heating delay on conversion and strength of a post-cured resin composite. J Dent Res. 77:1998;426-431.
5. Watts D.C., Hindi A.A. Intrinsic 'soft-start' polymerization shrinkage-kinetics in an acrylate-based resin composite. Dent Mater. 15:1999;39-45.
6. Wendt S.L. The effect of heat as a secondary cure upon the physical properties of three composite resins: I. Diametral tensile strength, compressive strength and marginal dimensional stability. Quintessence Int. 18:1987;265-271.
7. Asmussen E., Peutzfeldt A. Mechanical properties of heat-treated restorative resin for use in the inlay/onlay technique. Scand J Dent Res. 98:1990;564-567.
8. Krause W.R., Park S.H., Straup R.A. Mechanical properties of Bis-GMA resin short glass fiber composites. J Biomed Mat Res. 23:1989;1195-1211.
9. Bayne S.C., Thompson J.Y. Mechanical property analysis of two admixed PRIMM-modified commercial dental composites. Acad Dent Mater Trans. 9:1996;238.
10. Tyas M.J. Correlation between fracture properties and clinical performance of composite resins in Class IV cavities. Australian Dent J. 35:1990;46-49.
11. Sakaguchi R.L., Cross M., Douglas W.H. A simple model of crack propagation in dental restorations. Dent Mater. 8:1992;131-136.
12. Christensen G.J. Porcelain-fused-to-metal vs. nonmetal crowns. J Am Dent Assoc. 130:1999;409-411.
13. Donly K.J., Jensen M.E., Triolo P., Chan D. Clinical comparison of resin composite inlay and onlay posterior restorations and cast-gold restorations at 7 years. Quintessence Int. 30:1999;163-169.
14. Xu H.H.K., Martin T.A., Antonucci J.M., Eichmiller F.C. Ceramic whisker reinforcement of dental resin composites. J Dent Res. 78:1999;706-712.
15. Xu H.H.K. Dental composite resins containing silica-fused ceramic single-crystalline whiskers with various filler levels. J Dent Res. 78:1999;1304-1311.
16. Xu HHK, Eichmiller FC. Reinforcement of dental and other composite materials. U.S. Patent No. 5,861,445, issued in 1999.
17. Xu HHK, Eichmiller FC, Smith DT, Schumacher GE, Giuseppetti AA, Antonucci JM. Effect of thermal cycling on whisker-reinforced dental resin composites. J Mater Sci: Mater in Med 2002;13:875-83.
18. Jörgensen K.D., Asmussen E. Occlusal abrasion of a composite restorative resin with ultra-fine filler - an initial study. Quintessence Int. 9:1978;73-78.
19. de Gee A.J., Pallav P., Davidson C.L. Effect of abrasion medium on wear of stress-bearing composites and amalgam in vitro. J Dent Res. 65:1986;654-658.
20. Sakaguchi R.L., Douglas W.H., DeLong R., Pintado M.R. The wear of a posterior composite in an artificial mouth: a clinical correlation. Dent Mater. 2:1986;235-240.
21. Pallav P., de Gee A.J., Davidson C.L., Erickson R.L., Glasspoole E.A. The influence of admixing microfiller to small-particle composite resin on wear, tensile strength, hardness, and surface roughness. J Dent Res. 68:1989;480-490.
22. Bayne S.C., Taylor D.F., Heymann H.O. Protection hypothesis for composite wear. Dent Mater. 8:1992;305-309.
23. Peutzfeldt A., Asmussen E. Modulus of resilience as predictor for clinical wear of restorative resins. Dent Mater. 8:1992;146-148.
24. Wassell R.W., McCabe J.F., Walls A.W.G. A two-body frictional wear test. J Dent Res. 73:1994;1546-1553.
25. Kawai K., Leinfelder K.F. In vitro evaluation of OCA wear resistance of posterior composites. Dent Mater. 11:1995;246-251.
26. Suzuki S., Suzuki S.H., Cox C.F. Evaluating the antagonistic wear of restorative materials. J Am Dent Assoc. 127:1996;74-80.
27. Condon J.R., Ferracane J.L. Evaluation of composite wear with a new multi-mode oral wear simulator. Dent Mater. 12:1996;218-226.
28. Leinfelder K.F., Suzuki S. In vitro wear device for determining posterior composite wear. J Am Dent Assoc. 130:1999;1347-1353.
29. DeLong R., Douglas W.H. An artificial oral environment for testing dental materials. IEEE Trans Biomed Engng. 38:1991;339-345.
30. Suzuki S., Leinfelder K.F. Localized wear and marginal integrity of posterior resin composites. Am J Dent. 6:1993;199-203.
31. de Gee A.J., Van Duinen R.N.B., Werner A., Davidson C.L. Early and long-term wear of conventional and resin-modified glass ionomers. J Dent Res. 75:1996;1613-1619.
32. Ferracane J.L., Mitchem J.C., Condon J.R., Todd R. Wear and marginal breakdown of composites with various degrees of cure. J Dent Res. 76:1997;1508-1516.
33. Condon J.R., Ferracane J.L. In vitro wear of composite with varied cure, filler level, and filler treatment. J Dent Res. 76:1997;1405-1411.
34. Xu H.H.K., Eichmiller F.C., Giuseppetti A.A., Ives L.K., Parry E.E., Schumacher G.E. Three-body wear of a hand-consolidated silver alternative to amalgam. J Dent Res. 78:1999;1560-1567.
35. Lim B.S., Ferracane J.L., Condon J.R., Adey J.D. Effect of filler fraction and filler surface treatment on wear of microfilled composites. Dent Mater. 18:2002;1-11.
36. Xu H.H.K., Quinn J.B., Giuseppetti A.A., Eichmiller F.C. Effects of whisker-to-silica ratio on the reinforcement of dental resin composite with silica-fused whiskers. J Dent Res. 79:2000;1844-1849.
37. Xu H.H.K., Jahanmir S., Ives L.K., Job L.S., Ritchie K.T. Short-crack toughness and abrasive machining of silicon nitride. J Am Ceram Soc. 79:1996;3055-3064.
38. Xu HHK, Quinn JB, Douglas DT, Giuseppetti AA, Eichmiller FC. Effects of different whiskers on the reinforcement of dental resin composites. Dent Mater. Accepted for publication.
39. Concept™ Inlay/Onlay Processing Instructions, Ivoclar North America, Amherst, NY, p. 11.
40. Xu H.H.K., Eichmiller F.C., Antonucci J.M., Schumacher G.E., Ives L.K. Dental resin composites containing ceramic whiskers and precured glass ionomer particles. Dent Mater. 16:2000;356-363.