A study on the high speed face milling of Ti-6Al-4V alloy

American Society of Mechanical Engineers, Manufacturing Engineering Division, MED

Volumn 13, Issue , 2002, Pages 277-286

  Rao, Balkrishna ^a   Shin, Yung G ^a  

^a PURDUE UNIVERSITY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

CUTTING FORCES; FACE MILLING;

CARBIDE CUTTING TOOLS; COMPRESSIVE STRENGTH; COOLANTS; CORROSION RESISTANCE; DIAMOND CUTTING TOOLS; FRACTURE TOUGHNESS; MORPHOLOGY; POLYCRYSTALLINE MATERIALS; RESIDUAL STRESSES; SURFACE PROPERTIES; THERMAL CONDUCTIVITY; TITANIUM ALLOYS; WEAR OF MATERIALS;

MILLING (MACHINING);

EID: 0348144605     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1115/IMECE2002-39098     Document Type: Conference Paper

References (30)

1. Komanduri, R., and Von-Turkovich, B.F., 1981, "New Observations On the Mechanism of Chip Formation When Machining Titanium Alloys," Wear, 69, pp. 179-188.
2. Chandler, H.W., 1989, "Machining of Reactive Metals", ASM Handbook - Machining, 10, pp. 844-857.
3. Komanduri, R., and Reed, W.R., 1983, "Evaluation of Carbide Grades and A New Cutting Geometry for Machining Titanium Alloys," Wear, 92, pp. 113-123.
4. Narutaki, N., and Murakoshi, A., 1983, "Study On Machining of Titanium Alloys," Annals of the CIRP, 32, No. 1, pp. 65-69.
5. Hartung, P.D., and Kramer, B.M., 1982, "Tool Wear in Titanium Machining," Annals of the CIRP, 31, No. 1, pp. 75-80.
6. Kramer, B.M., and Chin, V.S., 1993, "Theoretical Consideration of Rare Earth Metal Compounds as Tool Materials for Titanium Machining," Annals of the CIRP, 42, pp. 111-114.
7. Sharman, A.C., Aspinwall, D.K., Dewes, R.C., and Bowen, P., 2000, "Tool Life When Turning Gamma Titanium Aluminide Using Carbide With PCD Tools With Reduced Depths Of Cut And High Pressure Cutting Fluid," SME Technical Report, MR00-196, pp. 1-6.
8. Gente, A., and Hoffmeister, H.W., 2001, "Chip Formation in Machining Ti6A14V at Extremely High Cutting Speeds," Annals of the CIRP, 50, pp. 49-52.
9. Hong, S.Y., Markus, I., and Jeong, W., 2001, "New Cooling Approach and Tool Life Improvement In Cryogenic Machining of Titanium Alloy Ti-6Al-4V," International Journal of Machine Tools and Manufacture, 41, pp. 2245-2260.
10. Mazurkiewics, M., Kubala, Z., Chow, J., 1989, "Metal Machining with High-pressure Water-jet Cooling Assistance - A New Possibility", ASME Journal of Engineering for Industry, 111, pp. 7-12.
11. Lindeke, R.R., Schönig, F.C., Khan, A.K., Haddad, J., 1991, "Machining of α-β Titanium with Ultra-high Pressure Through the Insert Lubrication/Cooling", Transactions of NAMRI/SME, 19, pp. 154-161.
12. Kovacevic, R., Cherukuthota, C., Mohan, R., 1995, "Improving Milling Performance with High Pressure Waterject-assisted Cooling/Lubrication", ASME Journal of Engineering for Industry, 117, pp. 331-339.
13. Liu, C.R. and Yang, X., 1999, "Machining Titanium and Its Alloys", Machining Science and Technology, 3[1], pp. 107-139.
14. Fitzsimmons, M., El-Wardany, T., FitzPatrick, P., 2000, "Efficient Machining of Titanium Rotorcraft Components", American Helicopter Annual Forum, May 2-4.
15. Mori, M., Furuta, M., Nakai, T., Fukaya, T., Liu, J. and Yamazaki, K., 1999, "High Speed Machining of Titanium by New PCD Tools", SAE Technical Paper, 1999-01-2296, pp. 1-6.
16. Kitagawa, T., Kubo, A., and Maekawa, K., 1997, "Temperature and Wear of Cutting Tools in High Speed Machining of Inconel 718 and Ti-6Al-6V-2Sn," Wear, 202, pp. 142-148.
17. Kuljanic, E., Fioretti, M., and Miani, F., 1998, "Milling Titanium Compressor Blades with PCD Cutter," 47, No. 1, pp. 61-64.
18. Barnett-Ritcey, D.D., Hachmoller, R., and Elbestawi, M.A., 2001, "Milling of Titanium Alloy Using Directed Through Spindle Coolant," SME Technical. Report, MR01-257, pp. 1-8.
19. Barish, H.B., 1987, "Advanced Cutting Tools for Machining Titanium," SME Technical Report, TE87-01, pp. 1-17.
20. Shin, Y.C., and Waters, A.J., 1997, "A New Procedure to Determine Instantaneous Cutting Force Coefficients for Machining Force Prediction," International Journal of Machine Tools And Manufacture, 37, No. 9, pp. 1337-1351.
21. Jensen, S.A., 1997, Vibration and Stability Analysis of Face Milling Operations, Master's Thesis, Purdue University, West Lafayette, IN.
22. Lee, D., 1985, "The Effect of Cutting Speed on Chip Formation Under Orthogonal Machining," Journal of Engineering for Industry, 107, pp. 55-63.
23. Barry, J., Byrne, G., and Lennon, D., 2001, "Observations On Chip Formation and Acoustic Emission in Machining Ti-6A1-4V Alloy," International Journal of Machine Tools and Manufacture, 41, pp. 1055-1070.
24. Manyindo, B.M., and Oxley, P.L.B., 1986, "Modeling the Catastrophic Shear Type of Chip When Machining Stainless Steel," Proc. Instn. Mech. Engrs., 200, No. C5, pp. 349-358.
25. Shaw, M.C., Dirke, S.O., Smith, P.A., Cook, N.H., Loewen, E.G. and Yang, C.T., "Machining Titanium", MIT Rep. 1954 (Massachusetts Institute of Technology).
26. Brinksmeier, E., Cammett, J.T., Konig, W., Leskovar, P., Peters, J., and Tonshoff, H.K., 1982, "Residual Stresses - Measurement and Causes in Machining Processes," Annals of the CIRP, 31, pp. 491-510.
27. Rao, B., and Shin, Y.C., 2001, "Analysis On, High Speed Face-Milling of 7075-T6 Aluminum Using Carbide and Diamond Cutters," International Journal of Machine Tools And Manufacture, 41, No. 12, pp. 1763-1781.
28. Dearnley, P.A. and Grearson, A.N., 1986, "Evaluation of Principal Wear Mechanisms of Cemented Carbides and Ceramics Used for Machining Titanium Alloy IMI318", Materials Science and Technology, 2, pp. 47-58.
29. Min, W., and Youzhen, Z., 1988, "Diffusion Wear in Milling Titanium Alloys," Materials Science and Technology, 4, pp. 548-553.
30. Heath, P.J., 1987, "Ultra-Hard Materials," European Journal of Engineering Education, 12, No. 1, pp. 5-20.