Modelling for Fault Detection and Isolation versus Modelling for Control

Mathematical and Computer Modelling of Dynamical Systems

Volumn 7, Issue 1, 2001, Pages 1-46

  Frank, P M ^a   Alcorta Garcia, E ^a   Koppen Seliger B ^a  

^a UNIVERSITY OF DUISBURG ESSEN   (Germany)

Author keywords

Fault detection and isolation; Modelling; Residuals

Indexed keywords

EID: 0347768469     PISSN: 13873954     EISSN: None     Source Type: Journal    
DOI: 10.1076/mcmd.7.1.1.3633     Document Type: Article

References (56)

1. Alcorta-García, E. and Frank, P.M.: Analysis of a Class of Dedicated Observer Schemes to Sensor Fault Isolation. UKACC International conference on Control'96 (1996), pp.59-64.
2. Alcorta-García, E. and Frank, P.M.: Deterministic nonlinear observer-based approaches to fault diagnosis: A survey. Control Eng. Practice 5(5) (1997), pp.663-670.
3. Amann, P. and Frank, P.M.: On fuzzy model-building in observers for fault diagnosis. In: IMACS '97. Berlin, 1997.
4. Amira GmbH: DTS200, Experimental Setup Three-Tank-System. Manual amira GmbH Duisburg, 1994.
5. Balle, P. et al.: Integrated Control, Diagnosis and Reconfiguration of a Heat Exchanger. IEEE Control Systems Magazine 18(3) (1998), pp.52-63.
6. Basseville, M.: Information Criteria for Residual Generation and Fault Detection and Isolation. Automatica 33(5) (1997), pp.783-803.
7. Beard, R.V.: Failure Accomodation in Linear Systems Through Self-Reorganization. Ph.D. Dissertation, M.I.T., 1971.
8. Blanke, M.: Consistent design of dependable control systems. Control Eng. Practice 4(9) (1996), pp.1305-1312.
9. Callier, F.M. and Desoer, C.A.: Linear System Theory. Springer Verlag, New York, 1991.
10. Cassar, J.P. and Staroswiecki M.: A structural approach for the design of failure detection and identification systems. Proc. IFAC-IFIP-IMACS Conf. Control of Industrial Systems '97, Belfont, France. 1997, pp.329-334.
11. Chen, J. and Patton R.J.: A Re-examination of Fault Detectability and Isolability in linear Dynamic Systems. In: Proc. IFAC Symp. SAFEPROCESS '94, Espoo Finland. 1994, pp.590-596.
12. Chen, S., Billings, S.A. and Grant, P.M.: Recursive Hybrid Algorithm for Non-linear System Identification Using Radial Basis Function Networks. Int. J. Control 55(51) (1992), pp. 1051-1070.
13. Chow, E.Y. and Willsky, A.S.: Analytical Redundancy and the Design of Robust Failure Detection Systems. IEEE Trans. on Autom. Control AC-29(7) (1984), pp.603-614.
14. Ding, X. and Frank, P.M.: Fault Detection via Factorization Approach. Systems & Control Letters 14 (1990), pp.431-436.
15. Frank, P.M.: Fault Diagnosis in Dynamic Systems Using Analytical and Knowledge-Based Redundancy - a Survey. Automatica 26 (1990), pp.459-474.
16. Frank, P.M. Analysis and Qualitative Model-Based Fault Diagnosis - A Survey and Some New Results. Europ. J. Control 2(1) (1996), pp.6-28.
17. Frank, P.M. and Ding, X.: Frequency Domain Approach to Optimally Robust Residual Generation and Evaluation for Model Based Fault Diagnosis. Automatica 30(5) (1994), pp.789-804.
18. Frank, P.M. and Marcu, T.: Intelligent Systems and Interfaces. In: H.N. Teodorescu, D. Mlyvek, A. Kandel and H.J. Zimmermann (eds.): Chap. Diagnosis Strategies and Systems: Principles, Fuzzy and neural Approaches. Kluwer Academic Publisher, Boston, 1999.
19. Füssel, D., Balle, P. and Isermann, R.: Closed Loop Fault Diagnosis on a Nonliear Process Model and Automatic Fuzzy Rule Generation. Proc. IFAC Symp. SAFEPROCESS '97(1) (1997), pp.359-364.
20. Gertler, J.: Analytical Redundancy Methods in Fault Detection and Diagnosis. In: IFAC/ IMACS Symp. SAFEPROCESS, Baden-Baden, Germany, 1991, pp.9-21.
21. Gertler, J.: Structured Residuals for Fault Isolation, Disturbance Decoupling and Modelling Error Robustness. In: IFAC-On line fault detection and supervision in the chemical process industries. Newark, Delaware, USA, 1992, pp. 111-119.
22. Gertler, J.: Model based fault diagnosis. Control-Theory and Advanced Technology 9(1) (1993), 259-285.
23. Gertler, J. and Singer, D.: A New Structural Framework for Parity Equation-Based Failure Detection and Isolation. Automatica 26(2) (1990), pp.381-388.
24. Gertler, J. and Monajemy, R.: Generating Directional Residuals with Dynamic Parity Equations. In: Proc. of the 12th IFAC'93 World Congress, Sydney. Vol. 7, 1993, pp.505-510.
25. Gomm, J.B., Williams, D. and Harris, P.: Detection of Incipient Faults Using Approximate Parametric Models. In: IFAC-On line fault detection and supervision in the chemical process industries. Newark, Delaware, USA, 1992, pp.138-143.
26. Han, Z. and Frank, P.M.: Fault Detection via Characteristic Parameter Estimation. Proc. of the 3rd European Control Conference, 1995, pp.378-382.
27. Han, Z. and Frank, P.M.: Application of Parameter Estimation based FDI to an Industrial Actuator Benchmark. In: Workshop on Advanced Control Systems, 1996, pp.7-14.
28. Himmelblau, D.M.: Use of Artificial Neural Networks to Monitor Faults and for Troubleshooting in the Process Industries. In: IFAC Symposium On-line Fault Detection and Supervision in the Chemical Process Industry. Newark, Delaware, USA, 1992.
29. Himmelblau, D.M. and Braker, R.: Recursive Hybrid Algorithm for Non-linear System Identification Using Radial Basis Function Networks. In: IFAC/IMAC-Symposion Safe-process'91. Baden-Baden, 1991, pp.369-373.
30. Hou M. and Müller, P.C.: Fault Detection and Isolation Observers. Int. J. of Control 60 (1994), pp.827-846.
31. Isermann, R.: Process Fault Detection Based on Modeling and Estimation Methods - A Survey. Automatica 20 (1984), pp.387-404.
32. Isermann, R. and Ballé, P.: Trends in the Application of Model Based Fault Detection and Diagnosis of Technical Process. In: IFAC-World Congres (1996), pp.1-12.
33. Kailath, T.: Linear Systems. Prentice Hall Information and System Sciences Series, 1980.
34. Kinnaert, M. and Peng, Y.: Residual Generator for Sensor and Actuator Fault Detection and Isolation: a Frequency Domain Approach. Int. J. of Control 61(6) (1995) pp.1423-1435.
35. Köppen-Seliger, B. and Frank, P.M.: Fault Detection and Isolation in Technical Processes with Neural Networks. In: Proc. 34th Conf. on Decision and Control CDC'95. New Orleans, 1995.
36. Massoumnia, M.: A Geometric Approach to Theynthesis of Failure Detection Filters. IEEE Trans. on Autom. Control AC-31(9) (1986), pp.839-846.
37. Massoumnia, M., Verghese, G.C. and Willsky, A.S.: Failure Detection and Isolation. IEEE Trans. on Autom. Control AC-34(3) (1989), pp.316-321.
38. Medvedev, A.: Fault Detection and Isolation by a Continuous Parity Space Method. Automatica 31(7) (1995), pp.1039-1044.
39. Medvedev, A.: Fault Detection and Isolation by Functional Continuous Dead-Beat Observer. Int. J. of Control 64(3) (1996), pp.425-439.
40. Mironvskii, L.A.: Functional Diagnosis of Dynamic Systems. Automation and Remote Control (1980), pp.1122-1143.
41. Nelles, O. and Fischer, M.: Local Linear Models Trees (lilimot) for Nonlinear System Identifiction of a Cooling Blast. In: European Congress on Intelligent Techniques and Soft Computing. Aachen, 1996, pp.1187-1191.
42. Nikoukhah, R.: Innovations Generation in the Presence of Unknown Inputs: Application to Robust Failure Detection. Automatica 30(12) (1994), pp.1851-1867.
43. Patton, R.J. and Chen, J.: A Review of Parity Space Approaches to Fault Diagnosis. In: Proc. IFAC/IMACS Symp. SAFEPROCESS. Baden-Baden, 1991, pp.239-255.
44. Patton, R.J., Frank, P.M. and Clark, R.N. (Eds.): Fault Diagnosis in Dynamic Systems, Theory and Applications. Englewood Cliffs, NJ: Prentice Hall, 1989.
45. Patton, R.J., Frank, P.M. and Clark, R.N. (Eds.): Isues of Fault Diagnosis for Dynamic Systems. Springer Verlag, London, 2000.
46. Querelle, R., Mary, N., Kiupel, N. and Frank, P.M.: Use of Qualitative Modelling and Fuzzy Clustering for Fault Diagnosis. WAC'96, 1996, pp.527-532.
47. Sorsa, T., Suontausta and Koivo, H.N.: Dynamic Fault Diagnosis Using Radial Basis Function Networks. In: TOOLDIAG'93. Toulouse, 1993.
48. Tzafestas, S.G. and Dalianis, P.J.: Fault Diagnosis in Complex Systems using Artificial Neural Networks. In: 3rd IEEE Conference on Control Applications. Glasgow, 1994, pp.877-882.
49. Verde, C. and Ibinarriaga, F.: Suboptimal Conditions for Leakage Detectability in Pipelines. In: IFAC Workshop on On-Line Fault Detection and Supervision in the Chemical Process Industries, 1998.
50. White, J.E. and Speyer, J.L.: Detection Filter Design: Spectral Theory and Algorithms. IEEE Trans. Automat. Control 32(7) (1987), pp.593-603.
51. Wünnenberg, J.: Observer-Based Fault Detection in Dynamic Systems. VDI-Fortschrittsber. VDI-Verlag, Reihe 8, Nr. 222, Düsseldorf, Germany, 1990.
52. Yu, D. and Shields, D.N.: A Fault Isolation Method Based on Parity Equations with Application to a Lathe-Spindle System. UKACC International conference on Control'96. 1996, pp.317-322.
53. Zhirabok, A.N.: Natural Redundancy and Fault Detection and Isolation in Dynamic Systems. In: Proc. IFAC Symp. SAFEPROCESS '94, Espoo Finland, 1994, pp.335-340.
54. Zhuang, Z. and Frank, P.M.: Making Qualitative State Observer Fuzzified. Proc. of the Symposium on Qualitative Modeling, Qualitative Fault Diagnosis and Fuzzy Control, 1996, pp.56-62.
55. Zhuang, Z. and Frank, P.M.: Most Possible Qualitative Behavior of Continuous Systems. European Control Conference '97, 1997.
56. Zhuang, Z. and Frank, P.M.: Qualitative Observer and its Application to FDI Systems. J. Syst. Control Eng. 211(4) (1997), 253-262.