A new facility for measurements of three-dimensional, local subcooled flow boiling heat flux and related critical heat flux

American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD

Volumn 366, Issue , 2000, Pages 199-208

  Boyd Sr , Ronald D ^a   Cofie, Penrose ^a   Li, Qing Yuan ^a   Ekhlassi, Ali ^a  

^a Texas A M University System   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 0347705350     PISSN: 02725673     EISSN: None     Source Type: Conference Proceeding    
DOI: None     Document Type: Article

References (44)

1. Akiba, M., et al., 1994, "Experiments on Heat Transfer of the Smooth and the Swirl Tubes Under One-Sided Heating Conditions," presented at the U.S./Japan Workshop, Q182, on Helium-Cooled High Heat Flux Components Design, General Atomics Corporation, San Diego, California.
2. Araki, M., et al., 1996, "Critical-Heat-Flux Experiment on the Screw Tube Under One-Sided-Heating Conditions," Fusion Technology, Vol. 29, pp. 519-528.
3. Araki, M., et al., 1995, "Heat Transfer Experiments on the Cooling Tubes for Divertor Plates Under One-Sided Heating Conditions," JAERI-Tech 95-022, Japan Atomic Energy Research Institute.
4. Baxi, C., 1992, "A Model for Analytical Performance Prediction of Hypervapotron," ET-P (92) 56, JET Team.
5. Bergles, A.E., 1963, "Subcooled Burnout in Tubes of Small Diameter," WAM 63-WA-182, American Society of Mechanical Engineering.
6. Boscary, J., Araki, M., and Akiba, M., 1997a, "Critical Heat Flux Database of JAERI for High Heat Flux Components for Fusion Application," JAERI-Data/Code 97-037, Japan Atomic Energy Research Institute.
7. Boscary, J., Araki, M., and Akiba, M., 1997b "Analysis of the JAERI Critical Heat Flux Data Base for Fusion Application," JAERI-Data/Code 97-037, Japan Atomic Energy Research Institute.
8. Boyd, R.D., 1999, "Single-Side Conduction Modeling for High Heat Flux Coolant Channel," Fusion Technology, Vol. 35, pp. 8-17.
9. Boyd, R.D., 1994a, "Similarities and Differences Between Single-Side and Uniform Heating for Fusion Applications - I: Uniform Heat Flux," Fusion Technology, Vol. 25, pp. 411-418.
10. Boyd, R.D., 1994b, "High Heat Flux Research in the Thermal Science Research Center," Mechanical Engineering Symposium, (Invited), Prairie View A&M University, Prairie View, TX, pp. 1-24.
11. Boyd, R.D., 1990, "Subcooled Water Flow Boiling Transition and the L/D Effect on CHF for a Horizontal Uniformly Heated Tube," Fusion Technology, Vol. 18, pp. 317-324.
12. Boyd, R.D., 1985, "Subcooled Flow Boiling Critical Heat Flux and Its Application to Fusion Energy Components; Part 1: Review of Fundamentals of CHF and Related Data Base," Fusion Technology, January, pp. 7-30.
13. Boyd, R.D., et al., 1984, "Preliminary Design Analysis of the ALT-II Limiter for TEXTOR," Journal of Nuclear Material, Vol. 121, pp. 309-315.
14. Boyd, R.D., Ekhlassi, A., and Shade, L., 1995, "Conceptual Design of a High Heat Flux Experiment," Prairie View A&M University, College of Engineering & Architecture Symposium, Vol. I, pp. 73-77.
15. Boyd, R.D. and Meng, X., 1996, "Local Subcooled Flow Boiling Model Development," Fusion Technology, Vol. 29, pp. 459-467.
16. Boyd, R.D. and Meng, X., 1995, "Similarities and Differences Between Single-Side and Uniform Heating for Fusion Applications - II: Sine Heat Flux," Fusion Technology, Vol. 27, pp. 401-407.
17. Boyd, R.D., Meng, X., and Maughan, H., 1995, "Heat Transfer for Plasma Facing Components," Proceedings National Heat Transfer Conference, Portland, Oregon, ASME HTD-Vol. 316.
18. Camp, T.R., and Meserve, R.L., 1974, Water and Its Impurities, Second Edition, Dowden, Hutchingson & Ross, Inc. Stoudsburg (PA).
19. Celata, G.P., Cumo, M., and Mariani, A., 1994, "Assessment of Correlations and Models for the Predicition of CHF in Subcooled Flow Boiling," Int. J. Heat and Mass Transfer, Vol. 37 (No. 2), pp. 237-255.
20. Celata, G.P. and Cumo, M., 1991, "A Review of Recent Experiments and Prediction Aspects of Burnout at Very High Heat Fluxes," Energia Nucleare, Vol. 8(#3), pp. 47-65.
21. Clinton Power Company, 1995, Product Guide.
22. Escourbiac F., and Schlosser, J., 1996, "Critical Heat Flux Tests Results on Various Tube Concepts for the ITER Divertor," Proceedings ITER Thermal-Hydraulic Technical Meeting; Focus: High Heat Flux Cooling, Abingdon, United Kingdom, pp. 2.1-2.38.
23. Falter, H.D. and Thompson, E., 1996, "Performance of Hypervapotron Beam Stopping Elements at JET," Fusion Technology, Vol. 29, pp. 584-595.
24. Gaspari, G.P., and Cattadori, G., 1994, "Subcooled Flow Boiling Burnout in Tubes With and Without Turbulence Promoters," Experimental Thermal and Fluid Science, Vol. 8, pp. 28-34.
25. General Electric, Buylog Catalog, Low and Medium Voltage Component and Equipment.
26. Groeneveld, D.C., 1981, "Heat Transfer Phenomena Related to the Boiling Crisis," AECL-7239, Chalk River Nuclear Laboratory, Atomic Energy of Canada, Ltd.
27. Hall, D.D. and Mudawar, I., 2000a, "Critical Heat Flux (CHF) for Water Flow in Tubes - I: Compilation and Assessment of World CHF Data," Int. J. Heat and Mass Transfer, Vol. 43 (No. 14), pp. 2573-2604.
28. Hall, D.D. and Mudawar, I., 2000b, "Critical Heat Flux (CHF) for Water Flow in Tubes - II: Subcooled CHF Correlations," Int. J. Heat and Mass Transfer, Vol. 43 (No. 14), pp. 2605-2640.
29. IEEE Spectrum, 1990, "An Instrument That Isn't Really," August, pp. 36-39.
30. Inasaka, R. and Nariari, H., 1996, "Critical Heat Flux of Subcooled Flow Boiling in Swirl Tubes Relevant to High-Heat-Flux Components," Fusion Technology, Vol. 29, p. 487.
31. Katto, Y., 1994, "Critical Heat Flux," Int. J. Multiphase Flow, Vol. 20 (suppl.), p. 53.
32. Marshall, T., et al., 1996, "Experimental Time to Burnout of a Prototypical ITER Divertor Plate During a Simulated Loss of Flow Accident," SAND96-2611, Sandia National Laboratories.
33. Marshall, T., 1998, "Experimental Examination of the Post-Critical Heat Flux and Loss of Flow Accident Phenomena for Prototypical ITER Divertor Channels," Ph.D. Thesis, Nuclear Engineering Department, Renesselaer Polytechnic Institute.
34. Marshall, T.D., Watson, R.D., McDonald, J.M., and Youchison, D.L., 1995, "Experimental Investigation of Post-CHF Enhancement Factor for a Prototypical ITER Divertor Plate with Water Coolant," Symposium on Fusion Engineering, IEEE, pp. 206-209.
35. Masterton, W. and Slowinski, E., 1977, Chemical Principles, W. B. Saunders Co., Philadelphia, p. 292.
36. rd Int. Heat Transfer Conference, Vol. 4, Hemisphere Publishing Corporation, p. 247.
37. nd Edition, John Wiley & Sons, Inc.
38. National Instrument, 1995a, Data Acquisition Product Guide.
39. National Instruments, 1995b, Instrumentation Reference and Catalogue.
40. Schlosser, J., et al., 1998, "Design, Fabrication, and Testing of an Improved High Heat Flux Element, Experience Feedback on Steady State Plasma Facing Components in Tore Supra," Fusion Engineering and Design, Vol. 39-40 (pt A), pp. 235-240.
41. Tolubinskiy, V.I., and Matorin, A.S., 1973, "Forced Convection Boiling Heat Transfer Crisis with Binary Mixtures," Heat Transfer-Sov. Res., Vol. 5, 2, p. 98.
42. TORE SUPRA TEAM, 1996 "Toward Long-Pulse, High-Performance Discharges in Tore Supra: Experimental Knowledge and Technological Developments for Heat Exhaust," Fusion Technology, Vol. 29, p. 417.
43. Youchison, D.L., et al., 1997, "Critical Heat Flux Performance of Hypervapotrons Proposed for Use in the ITER Divertor Vertical Target," SPIE HHF Engineering IV, San Diego, California.
44. Youchison, D.L. et al., 1996, "Thermal Fatique Testing at a Diffusion-Bonded Beryllium Divertor Mock-Up Under ITER-Relevant Conditions," Fusion Technology, Vol. 29, pp. 599-614.