Interface acoustic waves properties in some common crystal cuts

IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control

Volumn 50, Issue 10, 2003, Pages 1363-1370

  Camou, Serge ^b   Laude, Vincent ^a   Pastureaud, Thomas ^c   Ballandras, Sylvain ^a  

^a UNIVERSITÉ DE FRANCHE COMTÉ   (France)

^b UNIVERSITY OF TOKYO   (Japan)

^c Thales Microsonics   (France)

Author keywords

[No Author keywords available]

Indexed keywords

ACOUSTIC SURFACE WAVE DEVICES; ACOUSTIC TRANSDUCERS; COMPUTER SIMULATION; CRYSTALS; ELECTRODES; INTERFACES (MATERIALS); MATHEMATICAL MODELS; NATURAL FREQUENCIES; NUMERICAL ANALYSIS; PERMITTIVITY; PIEZOELECTRIC MATERIALS;

BOUNDARY WAVES; HARMONIC ADMITTANCE; INTERFACE ACOUSTIC WAVES; INTERFACE EFFECTIVE PERMITTIVITY; PERIODIC INTERDIGITAL TRANSDUCER;

ACOUSTIC WAVE PROPAGATION;

EID: 0347516339     PISSN: 08853010     EISSN: None     Source Type: Journal    
DOI: 10.1109/TUFFC.2003.1244753     Document Type: Article

References (26)

1. R. Stoneley, "Elastic waves at the surface of separation of two solids," Proc. Roy. Soc., vol. A-106, pp. 416-428, 1924.
2. C. Maerfeld and P. Tournois, "Pure shear surface wave guided by the interface of two semi-infinite media," Appl. Phys. Lett., vol. 19, pp. 117-118, 1971.
3. C. Lardat, J. P. Menot, and P. Tournois, "Delay lines using interfacial waves in solid-liquid solid structures," IEEE Trans. Sonics Ultrason., vol. 22, no. 1, pp. 16-24, 1975.
4. D. A. Lee and D. M. Corbly, "Use of interface waves for non-destructive inspection," IEEE Trans. Sonics Ultrason., vol. 24, no. 3, pp. 206-212, 1977.
5. 3," IEEE Trans. Sonics Ultrason., vol. 25, no. 6, pp. 384-389, 1978.
6. R. O. Claus and C. H. Palmer, "Optical measurement of ultrasonic waves on interfaces between bonded solids," IEEE Trans. Sonics Ultrason., vol. 27, no. 3, pp. 97-103, 1980.
7. 3 structure substrate for Stoneley waves," in Proc. IEEE Ultrason. Symp., 1987, pp. 257-260.
8. T. Irino, Y. Suirosaki, and Y. Shimizu, "Propagation of boundary acoustic waves along a ZnO layer between two materials," IEEE Trans. Ultrason., Ferroelect., Freq. Contr., vol. 35, no. 6, pp. 701-707, 1988.
9. T. Irino and Y. Shimizu, "Optimized Stoneley wave device by proper choice of glass overcoat," IEEE Trans. Ultrason., Ferroelect., Freq. Contr., vol. 36, no. 2, pp. 159-167, 1989.
10. E. Danicki and W. Laprus, "Piezoelectric interfacial waves in langasite and dilithium tetraborate," in Proc. IEEE Ultrason. Symp., 1995, pp. 1011-1014.
11. T. Yamashita, K. Hashimoto and M. Yamaguchi, "Highly piezoelectric shear-horizontal-type boundary waves," Jpn. J. Appl. Phys., vol. 36, no. 5B, pp. 3057-3059, 1997.
12. 3 structure," in Proc. IEEE Int. Freq. Contr. Symp., 1998, pp. 484-488.
13. K. Blötekjær, K. A. Ingebrigtsen, and H. Skeie, "A method for analysing waves in structures consisting of metal strips on dispersive media," IEEE Trans. Electron. Devices, vol. 20, no. 6, pp. 1133-1138, 1973.
14. K. Blötekjær, K. A. Ingebrigtsen, and H. Skeie, "Acoustic surface waves with periodic metal strips on the surface," IEEE Trans. Electron. Devices, vol. 20, no. 6, pp. 1139-1146, 1973.
15. J. J. Campbell and W. R. Jones, "A method for estimating optimal crystal cuts and propagation direction for excitation of piezoelectric surface waves," IEEE Trans. Sonics Ultrason., vol. 15, no. 4, pp. 209-217, 1968.
16. A. H. Fahmy and E. L. Adler, "Propagation of surface acoustic waves in multilayers: A matrix description," Appl. Phys. Lett., vol. 22, no. 10, pp. 495-497, 1973.
17. E. L. Adler, "Matrix methods applied to acoustic waves in multilayers," IEEE Trans. Ultrason., Ferroelect., Freq. Contr., vol. 37, no. 6, pp. 485-490, 1990.
18. K. A. Ingebrigtsen, "Surface waves in piezoelectrics," J. Appl. Phys., vol. 40, pp. 2681-2687, Jun. 1969.
19. Y. Zhang, J. Desbois, and L. Boyer, "Characteristic parameters of surface acoustic waves in a periodic metal grating on a piezoelectric substrate," IEEE Trans. Ultrason., Ferroelect., Freq. Contr., vol. 40, no. 3, pp. 183-192, 1993.
20. E. L. Adler, "SAW and pseudo-SAW properties using matrix methods," IEEE Trans. Ultrason., Ferroelect., Freq. Contr., vol. 41, no. 6, pp. 876-882, 1994.
21. H. P. Reichinger and A. R. Baghai-Wadji, "Dynamic 2D analysis of SAW devices including mass-loading," in Proc. IEEE Ultrason. Symp., 1992, pp. 263-266.
22. P. Ventura, J. Desbois, and L. Boyer, "A mixed FEM/analytical model of the electrode mechanical perturbation for SAW and PSAW propagation," in Proc. IEEE Ultrason. Symp., 1993, pp. 205-208.
23. G. Endoh, H. Hashimoto, and M. Yamaguchi, "Surface acoustic wave propagation characterization by finite element method and spectral domain analysis," Jpn. J. Appl. Phys., vol. 34, no. 5B, pp. 2638-2641, 1995.
24. P. Ventura, J.-M. Hodé, J. Desbois, and M. Solal, "Combined FEM and green's function analysis of periodic SAW structure, application to the calculation of reflection and scattering parameters," IEEE Trans. Ultrason., Ferroelect., Freq. Contr., vol. 48, no. 5, pp. 1259-1274, 2001.
25. P. Ventura, J.-M. Hodé, M. Solal, J. Desbois, and J. Ribbe, "Numerical methods for SAW propagation characterization," in Proc. IEEE Ultrason. Symp., 1998, pp. 175-186.
26. K. Hashimoto, J. Koskela, and M. M. Salomaa, "Fast determination of coupling of modes parameters based on strip admittance approach," in Proc. IEEE Ultrason. Symp., 1999, pp. 93-96.